Whether or not dangling expressions are permitted is now based solely off of
the stack context, which is also much more intuitive.
`RootStrategy` now only does one thing, and the existing comments describe
why it exists despite that one thing seeming very similar.
`RootStrategy` further alludes to how `ExprStack` could also be
eliminated, should it be worth doing so. It is a tad redundant now with the
new stack.
DEV-13708
This does the same thing to `AirExprAggregate` that was previously done for
`AirAggregate`, taking all parent context from the stack.
This results in a fairly significant simplification of the code, which is
nice, and it makes the `RootStrategy` obviously obsolete in the dangling
case, which will result in more refactoring to simplify it even more.
I regret not taking this route to begin with, but not only was I hoping I
wouldn't need to, but I was still deriving the graph structure and wasn't
sure how this would eventually turn out. These commits serve as a proof of
necessity. Or, at least, concrete rationale.
It's worth noting that this also introduces `From` implementations for
`AirAggregate` and the child parsers, and then uses _that_ to push context
from the `AirTplAggregate` parser. This means that we're just about ready
for it to serve as a superstate. But there is still a specialization of
`AirExprAggregate` in that `From` impl, which must be removed.
DEV-13708
This is more of the same of the previous commit, but in a more digestable
chunk. We now have child states that are able to be constructed using a
simple `From`, which is important to making `AirAggregate` a `SuperState`.
This also makes `AirStack` act like a prototype chain for `ObjectIndex`es,
creating environments where context shadows. The linear search should only
have to check the last two frames (e.g. an Expr has a parent Pkg or Tpl
context which will have a `rooting_oi` value), and this is only done during
a rooting operation.
DEV-13708
This begins to introduce `AirStack` and starts to migrate context away from
the individual `ParseState`s onto the stack.
I should have started to commit earlier; this is getting a bit large and
makes it hard to follow what I'm doing so, hopefully stopping a little bit
short will allow the following commit to show that.
This is a work-in-progress change. All tests pass, but the refactoring is
incomplete. The `AirStack` abstraction is _also_ incomplete and will have
better, more domain-specific operations that make it harder to mess up
pairing pushes with pops.
The purpose of doing this is to allow `AirAggregate` to serve exclusively as
a sum state, which can then become a SuperState, much like `ele_parse!`'s
approach.
The _end_ goal of all of this is arbitrary template nesting.
DEV-13708
The graph's ontology is defined in the direction of the edge: from OA
to OB. This is enforced by the type system to ensure that no code path is
able to generate an invalid graph.
But that also makes it very difficult to work with a generic source to a
specific target.
This introduces a `ObjectIndexRelTo` trait that says whether `Self` is able
to be related to some `ObjectKind` `OB`, implements it for `ObjectIndex
where ObjectRelTo<OB>`, and introduces a new semi-opaque type
`ObjectIndexTo` that allows for the source `ObjectIndex` to be generic.
This then redefines some existing graph primitives in terms of
`ObjectIndexRelTo`, in particular creating edges, so that `ObjectIndex` can
be used as today, and the new `ObjectIndexTo` can be used in the same way
with the same API, without violating the graph ontology.
This will be used by `AirAggregate` to create dynamic targets for rooting
and splicing/expansion.
DEV-13708
To simplify things in support of upcoming changes, we'll just instantiate a
new one as needed. This doesn't have an appreciable performance impact, so
the optimization is premature. It was done just because it was more of the
same that TAMER was already doing, but now it's making things more
difficult.
DEV-13708
Future changes to `AirAggregate` are going to require additional context (a
stack, specifically), but the `Context` is currently utilized
by `Asg`. This introduces a layer of abstraction that will allow us to add
the stack.
Alongside these changes, `ParseState` has been augmented with a `PubContext`
type that is utilized on public APIs, both maintaining BC with existing code
and keeping these implementation details encapsulated.
This does make a bit of a mess of the internal implementation, though, with
`asg_mut()` sprinkled about, so maybe the next commit can clean that up a
bit. EDIT: After adding `AsMut` to a bunch of asg::graph::object::*
methods, I decided against it, because it messes with the inferred
ownership, requiring explicit borrows via `as_mut()` where they were not
required before. I think the existing code is easier to reason about than
what would otherwise result from having `mut asg: impl AsMut<Asg>`
everwhere.
DEV-13708
Previously, `AirTplAggregate` worked only in a `Pkg` context, being able to
root `Tpl` `Ident`s in `Pkg` and expand only into `Pkg`. This still does
the same, but generalizes to allow for different roots and expansion
targets.
This will be utilized to parse nested templates.
DEV-13708
I'm happy with how this ended up turning out---I was able to accomplish this
without having to introduce any additional state to the parser (I _removed_
a state, actually) by tweaking NIR a bit in a previous commit.
We can't update the system test yet, though, because nested templates are
not yet supported by asg::air::tpl; that'll come next. If you try, you'll
be greeted with this error presently (which is worth showing since you'll
never see it unless you're hacking TAMER):
,=====[ ./tests/xmli/template/ logs ]======
|
| thread 'main' panicked at 'not yet implemented: internal error:
| note: nested tpl open
| --> ./tests/xmli/template/src.xml:129:5
| |
| 129 | <t:inner-short />
| | -------------- note: for this template
|
|
| !!! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ !!!
| !!! THIS IS AN UNFINISHED FEATURE IN TAMER !!!
| !!! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ !!!
| !!! This message means that TAMER has encountered an !!!
| !!! unrecoverable error that forced it to terminate !!!
| !!! processing. !!!
| !!! !!!
| !!! TAMER has attempted to provide you with contextual !!!
| !!! information above that might allow you to work around !!!
| !!! this problem until it can be fixed. !!!
| !!! !!!
| !!! Please report this error, including the above !!!
| !!! diagnostic output beginning with 'internal error:'. !!!
| !!! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ !!!
| ', src/asg/air/tpl.rs:207:55
| note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
| Command exited with non-zero status 101
| 0/165fault 0/8io 3528rss 14/2ctx
| /home/[...]/tame/tamer/target/debug/tamec -o ./tests/xmli/template/out.xmli --emit xmlo ./tests/xmli/template/src.xml
|
`====[ end ./tests/xmli/template/ logs ]====
DEV-13708
This is a long-overdue change to make this easier to read, but I'm _still_
holding off on refactoring, since there's still a lot of room for different
patterns to form with all of NIR that is left.
DEV-13708
This adds explicit variants for shorthand template application. This is
less cryptic, and we'll be able to check for the close directly during
desugaring.
DEV-13708
This represents a significant departure from how the XSLT-based TAME handles
the `@values@` param, but it will end up having the same effect. It builds
upon prior work, utilizing the fact that referencing a template in TAMER
will expand it.
The problem is this: allowing trees in `Meta` would add yet another
container; we have `Pkg` and `Tpl` already. This was the same problem with
template application---I didn't want to add support for binding arguments
separately, and so re-used templates themselves, reaching the generalization
I just mentioned above.
`Meta` is intended to be a lexical metasyntatic variable. That keeps its
implementation quite simple. But if we start allowing trees, that gets
rather complicated really quickly, and starts to require much more complex
AIR parser state.
But we can accomplish the same behavior by desugaring into an existing
container---a template---and placing the body within it. Then, in the
future, we'll parse `param-copy` into a simple `Air::RefIdent`, which will
expand the closed template and produce the same result as it does today in
the XSLT-based system.
This leaves open issues of closure (variable binding) in complex scenarios,
such as in templates that introduce metavariables to be utilized by the
body. That's never a practice I liked, but we'll see how things evolve.
Further, this does not yet handle nested template applications.
But this saved me a ton of work. Desugaring is much simpler.
The question is going to be how the XSLT-based compiler responds to this for
large packages with thousands of template applications. I'll have to see
if it's worth the hit at that time, or if we should inline it when
generating the `xmli` file, producing the same `@values@` as
before. But as it stands at this moment, the output is _not_ compatible
with the current compiler, as it expects `@values@` to be a tree, so a
modification would have to be made there.
DEV-13708
This applies to template application only; there's still some work to do for
template parameters in definitions (well, for deriving them in `xmli` at
least). And, as you can see, there's still a lot of TODO items here.
I ended up backtracking on tree edges to Meta, and even on cross edges to
Meta, because it complicated xmli derivation with no benefit right now;
maybe a cross edge will be re-added in the future, but I need to move on and
see where this takes me.
But, it works.
DEV-13708
I'm not happy with this implementation. The linear search is undesirable,
but not too bad (and maybe wouldn't even be worth caching, if this were the
whole story), but we _also_ need to prevent duplicate identifiers. We are
not going to want to perform a linear search of a linked list (effectively)
every time we add an identifier to check for uniqueness, so I think the
caching is going to have to be generalized very shortly anyway.
As it stands now, a duplicate identifier would cause an error at expansion
time. That's not what we want, but it's not terrible, because you can have
that same problem in normal circumstances without local conflicts.
But this'll be used for metavariables as well, where we absolutely _do_ want
to fail at template definition time.
DEV-13708
Identifier lookups, as done using the graph methods today, look up from a
cache representing the global environment.
Templates must not contribute to this environment until expansion. Further,
metavariables will not be present in this environment. To avoid confusion
and help obviate accidental contributions to this environment, the methods
have been renamed. This will also allow for the creation of more general
methods down the line.
DEV-13708
This makes the tests quite a bit easier to understand visually. I've been
doing this with all new tests but had to go back to some old ones, and still
have more to go back to. Baby steps.
DEV-13708
I had intended for this to be a full vertical slice initially, but AIR's
parser is going to need enough work that it'll muddy this patch a bit too
much.
This keeps the desugaring simple, which is what I was hoping for.
The next step is to load it into the graph and emit regenerated longhand
sources.
I also don't like how the namespace prefix is just being ignored for
shorthand param desugaring. This is also the case in the XSLT-based
compiler, but this violates TAMER's principle that it should parse every bit
of information; nothing should be ignored. If something does not contribute
useful information, then it is not a useful construct and ought to be
rejected.
DEV-13708
This moves translation from NirToAir into TplShortDesugar, and changes the
output from AIR to NIR.
This is going to be much easier to reason about as a desugaring
operation (and indeed that's always how TAME has implemented it, in XSLT);
this keeps the complexity isolated.
Ideally, NirToAir wouldn't even accept tokens that it can't handle, but
that's going to take quite a bit more work and I don't have the time right
now. Instead, we'll fail at runtime with some hopefully-useful
information. It shouldn't actually happen in practice.
DEV-13708
Previous to this commit, ontological cross edges were declared
statically. But this doesn't fare well with the decided implementation for
template application.
The documentation details it, but we have Tpl->Ident which could mean "I
define this Ident once expanded", or it could mean "this is a reference to a
template I will be applying". The former is a tree edge, the latter is a
cross edge, and that determination can only be made by inspecting edge data
at runtime.
It could have been resolved by introducing new Object types, but that is a
lot of work for little benefit, especially given that only (right now) the
visitor uses this information.
DEV-13708
This this a big change that's difficult to break up, and I don't have the
energy after it.
This introduces nullary template application, short- and long-form. Note
that a body of the short form is a `@values@` argument, so that's not
supported yet.
This continues to formalize the idea of what "template application" and
"template expansion" mean in TAMER. It makes a separate `TplApply`
unnecessary, because now application is simply a reference to a
template. Expansion and application are one and the same: when a template
expands, it'll re-bind metavariables to the parent context. So in a
template context, this amounts to application.
But applying a closed template will have nothing to bind, and so is
equivalent to expansion. And since `Meta` objects are not valid outside of
a `Tpl` context, applying a non-closed template outside of another template
will be invalid.
So we get all of this with a single primitive (getting the "value" of a
template).
The expansion is conceptually like `,@` in Lisp, where we're splicing trees.
It's a mess in some spots, but I want to get this committed before I do a
little bit of cleanup.
This chooses Option B, as stated would likely be the case in the previous
commit. The reasons are practical---I intend to support partial application
if doing so is worth it, either in implementation of the compiler or the
source language.
Closed templates can be referenced using `IdentRef` to trigger
expansion---their value is what they expand into, and they are spliced into
that point in the tree, like `,@` in Lisp. We are able to overload this
behavior because we have the necessary type information.
However, I don't want to have to generate an Ident for every single template
expansion; there are many tens of thousands of them in our production
system. Since AIR doesn't presently have a way to deal with this situation,
I'll for now add a special token that will close and expand a template in
place; it can be replaced with two separate tokens (`TplEnd` + `Ref`, for
example) in the future if such a need arises.
Are we there yet...?
DEV-13708
Also known as metavariables or template parameters.
This is a bit of a tortured excursion, trying to figure out how I want to
best represent this. I have a number of pages of hand-written notes that
I'd like to distill over time, but the rendered graph ontology (via
`asg-ontviz`) demonstrates the broad idea.
`AirTpl::TplApply` highlights some remaining questions. What I had _wanted_
to do is to separate the concepts of application and expansion, and support
partial application and such. But it's going to be too much work for now,
when it isn't needed---partial application can be worked around by simply
creating new templates and duplicating params, as we do today, although that
sucks and is a maintenance issue. But I'd rather address that head-on in
the future.
So it's looking like Option B is going to be the approach for now, with
templates being closed (as in, no free metavariables) and expanded at the
same time. This simplifies the parser and error conditions significantly
and makes it easier to utilize anonymous templates, since it'll still be the
active context.
My intent is to get at least the graph construction sorted out---not the
actual expansion and binding yet---enough that I can use templates to
represent parts of NIR that do not have proper graph representations or
desugaring yet, so that I can spit them back out again in the `xmli` file
and incrementally handle them. That was an option I had considered some
months ago, but didn't want to entertain it at the time because I wasn't
sure what doing so would look like; while it was an attractive approach
since it pushes existing primitives into the template system (something I've
wanted to do for years), I didn't want to potentially tank performance or
compromise the design for it after I had spent so much effort on all of this
so far.
But my efforts have yielded a system that significantly exceeds my initial
performance expectations, with a decent abstractions, and so this seems
viable.
DEV-13708
See the Air docblock for more information. I'm introducing new tokens for
the template system, which uses the terms "free" and "closed". I prefer
open/close for delimiters, as I've expressed elsewhere, but unfortunately it
conflicts too much (and too confusingly) with other standard terminology as
we get more into the formal side of the language.
DEV-13708
This removes special cases, but it does complicate the parent `AirAggregate`
parser. A pattern of delegation is forming, though abstracting it may be an
interesting challenge, given Rust's limitation on macro invocations as match
arms. But, I think I can manage by generating the entire match using a
macro with a match-compatible syntax, augmenting where
needed...maybe. This'll be messy.
...but if I can write the nightmare that is `ele_parse!`, I'm sure I can
manage this. I just prefer to avoid complex macros unless I really need
them.
DEV-13708
Small break from templates for something easier. I have COVID-19, so I'll
use that as my excuse for wanting to be more lazy.
The real reason is to see some more concrete progress and ensure that
patterns hold for simple expressions before further refactoring.
But, before I proceed with such refactoring, I really ought to approach
something that requires a NIR desugaring step, like case statements.
DEV-13708
The intent was to have a very simple implementation of `hold_dangling` and
have everything work. But, I had a nasty surprise when the system tests
caught bug caused by some interesting depth interactions as it relates to
`xmli` and auto-closing.
I added an extra test/example in `asg::graph::visit::test` to illustrate the
situation; it was difficult to derive from the traces, but trivially obvious
once I wrote it out as an example.
With that, templates can now aggregate tokens for dangling expressions.
DEV-13708
And finally we have tokens aggregated onto the ASG in the context of a
template. I expected to arrive here much more quickly, but there was a lot
of necessary refactoring. There's a lot more that could be done, but I need
to continue; I had wanted this done a week ago.
It is worth noting, though, that this finally achieves something I had been
wondering about since the inception of this project---how I'd represent
templates on the graph. I think this worked out rather nicely. It wasn't
even until a few months ago that I decided to use AIR instead of NIR for
that purpose (NIR wouldn't have worked).
And note how I didn't have to touch the program derivation at all---the
system test just works with the AIR change, because of the consistent
construction of the graph. Beautiful.
DEV-13708
This hoists the errors back into `AirAggregate`; I need dead states for the
`AirTplAggregate` parser so that it will know when to (and not to) interpret
tokens in the context of the template itself.
In a previous commit message, I had pondered whether it may be possible to
eliminate the dead state transition, and yet here I've used it with both of
the sub-parsers now. So it seems like the better option in the future may
be to narrow the type further---to say precisely _what_ types of tokens may
yield a dead state transition; otherwise you lose the match information from
the parser that yielded it.
A stubbornly persistent problem in Rust, this magical and hidden match
knowledge.
DEV-13708
This sets us up to be able to determine how `Dangling` expressions will be
rooted into templates.
This new strategy isn't yet handling `Dangling`; I wanted to get this
committed first so that the `Dangling` refactoring is more clear.
DEV-13708
Expressions were previously tied to packages. This prepares for using a
`Tpl` as a container for expressions.
This does not yet handle the situation of auto-rooting dangling expressions
within the container.
DEV-13708
This result in less useful debug output, but it'll be needed for using
a (possibly-anonymous) template as evidence.
This evidence is simply for debugging, and to require some sort of value
during development to help obviate when maybe something is being done
incorrectly (if no obvious value exists).
DEV-13708
This is more of the same refactoring that has been happening. This
extraction also helps emphasize the relationship between imported objects,
and isolates the growing number of test cases. This parser will only grow.
DEV-13708
Just as was done with the expression parser, which this will utilize. This
initializes it, but doesn't yet make use of it (`AirExprAggregate`).
Refactoring was definitely needed; decomposing this is quite a bit of work,
in no small part because of the complexity. This helps significantly.
DEV-13708
This works around limitations of Rust's borrow checker as of the time of
writing. See the provided documentation for more information.
The branch context is not yet exposed to the `delegate` family of methods;
it will be added only as needed in the future.
DEV-13708
This delegates expression parsing to `AirExprAggregate`, in an effort to
both begin to simplify the understanding and maintenance of `AirAggregate`;
and allow for parser composition for template parsing.
This utilizes the prior changes for token sum types to precisely define the
subset of AIR tokens supported by the expression parser. This differs from
prior approaches which delegated until a dead state, relying on runtime
information to determine if a parser has finished. This allows us to
determine that statically.
I do want to be able to eliminate the dead state from the parser so we can
get rid of the `unreachable!`, but I need to move on; that's something I had
tried to do in the past too, which ended up adding a bit of complexity, and
I'll have to consider my options in the future, including whether the dead
state transition can be entirely eliminated in favor of the combination of
these sum types and recovery; the parsing framework decisions were made
while recovery was still an open question, at least in practice.
DEV-13708
This was a rather frustrating thing to encounter. I was working on
refactoring `AirAggregate`, and found that my tests were hanging despite no
apparent cause in the parser itself.
As it turns out, rather than failing with a `FinalizeError` as I
expected (since I was mid-refactor), `collect()` was allocating space for an
endless stream of errors. This was easily verified by adding a `take(x)`
and observing the assertion failure (in this case, in `close_pkg_mid_expr`).
This happens to be the first time in a long time that I actually had to
debug---the combination of robust types as proofs and tests to fill in the
gaps means that runtime issues are caught at build time in all but
exceptional cases (like this one).
It's also worth noting that, because of my policy of iterating only at the
higher levels of the program, it was clear that this must somehow be
Parser-related, since that's the only part of the system that has the
potential for unbounded recursion due to its cyclic state machines.
DEV-13708
This introduces a new macro `sum_ir!` to help with a long-standing problem
of not being able to easily narrow types in Rust without a whole lot of
boilerplate. This patch includes a bit of documentation, so see that for
more information.
This was not a welcome change---I jumped down this rabbit hole trying to
decompose `AirAggregate` so that I can share portions of parsing with the
current parser and a template parser. I can now proceed with that.
This is not the only implementation that I had tried. I previously inverted
the approach, as I've been doing manually for some time: manually create
types to hold the sets of variants, and then create a sum type to hold those
types. That works, but it resulted in a mess for systems that have to use
the IR, since now you have two enums to contend with. I didn't find that to
be appropriate, because we shouldn't complicate the external API for
implementation details.
The enum for IRs is supposed to be like a bytecode---a list of operations
that can be performed with the IR. They can be grouped if it makes sense
for a public API, but in my case, I only wanted subsets for the sake of
delegating responsibilities to smaller subsystems, while retaining the
context that `match` provides via its exhaustiveness checking but does not
expose as something concrete (which is deeply frustrating!).
Anyway, here we are; this'll be refined over time, hopefully, and
portions of it can be generalized for removing boilerplate from other IRs.
Another thing to note is that this syntax is really a compromise---I had to
move on, and I was spending too much time trying to get creative with
`macro_rules!`. It isn't the best, and it doesn't seem very Rust-like in
some places and is therefore not necessarily all that intuitive. This can
be refined further in the future. But the end result, all things
considered, isn't too bad.
DEV-13708
This sets the stage for template parsing, and finally decides how we're
going to represent templates on the ASG. This is going to start simple,
since my original plans for improving how templates are
handled (conceptually) is going to have to wait.
This is the last difficult object type to figure out, with respect to graph
representation and derivation, so I wanted to get it out of the way.
DEV-13708
I wasn't initially sure whether I'd want separate tokens for different types
of identifying operations, but now that I see that it is clear from the
current state of the parser, there's no need.
This matches the name of the token in NIR.
DEV-13708
The previous commit demonstrated the amount of boilerplate necessary for
introducing new `ObjectKind`s; this abstracts away a lot of that
boilerplate, and allows for declarative relationship definition for the
ASG's ontology.
DEV-13708
There's quite a bit of boilerplate here that'll eventually need factoring
out. But it's also clear that it is somewhat onerous to add new object
types.
Note that a good chunk of this burden is _intentional_, via exhaustiveness
checks---adding a new type of object is an exceptional occurrence (well, in
principle, but we haven't added them all yet, so it'll be more common
initially), and we'd rather be safe to ensure that everything is properly
considering how that new type of object interacts with it.
Let's not confuse coupling with safety---the latter causes a burden because
of the former, not because of itself; it provides a service to us.
But, nonetheless, we'll want to reduce this burden somewhat since there are
a number more to add.
DEV-13708
Just as `rate` is a `sum`, `classify` is an `all` by default. The `@any`
attribute will change that interpretation, though I only intend to recognize
that in parsing later on, not emit that in XMLI.
DEV-13708
Let's start to be explicit about what's missing as we continue to add new
tokens; the exhaustiveness checks throughout the system will guide the
changes that need to be made.
DEV-13708
The element only, no attributes yet.
I'll keep forming boilerplate until abstraction points become obvious with
more variety; this is still pretty close to what was already supported.
DEV-13708
We already had `TreeContext`, and I'm passing the same arguments around, so
this uses it to lift arguments out of these functions, like partial
application.
DEV-13708
This tidies this method up into a decent state that I'm fairly content
with. This goes to emphasize my dislike of returns, which muddies control
flow and makes the code more difficult to read at a glance, which increase
the likelihood of logic bugs.
`match` statements in tail position, on the other hand, are very clear, and
less cognitively burdensome since you can see each individual code path at a
glance.
DEV-13708
This begins to develop a pattern for doing these transformations. I had
tried a number of things using iterators, but I wasn't satisfied with either
how they were turning out; had to fight too much with the type system; or
had to resort to heap allocations. Sticking with an explicit
`push`/`push_all` for now works just fine.
Almost done cleaning up `AsgTreeToXirf::parse_token`, and then I can move on
to introducing more objects.
DEV-13708
This is generic over the source, just as the target, defaulting just the
same to `ObjectIndex`.
This allows us to use only the edge information provided rather than having
to perform another lookup on the graph and then assert that we found the
correct edge. In this case, we're dealing with an `Ident->Expr` edge, of
which there is only one, but in other cases, there may be many such edges,
and it wouldn't be possible to know _which_ was referred to without also
keeping context of the previous edge in the walk.
So, in addition to avoiding more indirection and being more immune to logic
bugs, this also allows us to avoid states in `AsgTreeToXirf` for the purpose
of tracking previous edges in the current path. And it means that the tree
walk can seed further traversals in conjunction with it, if that is so
needed for deriving sources.
More cleanup will be needed, but this does well to set us up for moving
forward; I was too uncomfortable with having to do the separate
lookup. This is also a more intuitive API.
But it does have the awkward effect that now I don't need the pair---I just
need the `Object`---but I'm not going to remove it because I suspect I may
need it in the future. We'll see.
The TODO references the fact that I'm using a convenient `resolve_oi_pairs`
instead of resolving only the target first and then the source only in the
code path that needs it. I'll want to verify that Rust will properly
optimize to avoid the source resolution in branches that do not need it.
DEV-13708
This makes the inner `Object` type generic (but defaulting to the same inner
types as before) so that it can be used as a sum type for various types
where `ObjectKind`-based narrowing is required.
In this case, it's used to narrow `ObjectIndex` alongside the inner
`ObjectKind` so that the two are definitely in sync. This not only results
in cleaner code and a more intuitive API that's approachable to people
less familiar with the system, but it also helps to eliminate logic bugs
that might result form manually narrowing (as was done before this change).
DEV-13708
This was a fairly simple addition, since rate blocks already lower into sum
expressions; these are just non-identified.
This does emphasize that the nir::parse `ele_parse!` abstraction I spent so
much time on ended up not being a perfect fit, as it now has some
boilerplate after it was stripped of much of its capabilities some time ago.
Don't worry, `nir::air` and `asg::graph::xmli` will get cleaned up.
DEV-13708
This extends the POC a bit by beginning to reconstruct rate blocks (note
that NIR isn't producing sub-expressions yet).
Importantly, this also adds the first system tests, now that we have an
end-to-end system. This not only gives me confidence that the system is
producing the expected output, but serves as a compromise: writing unit or
integration tests for this program derivation would be a great deal of work,
and wouldn't even catch the bugs I'm worried most about; the lowering
operation can be written in such a way as to give me high confidence in its
correctness without those more granular tests, or in conjunction with unit
or integration tests for a smaller portion.
DEV-13708
Just some final POC setup for how this'll work; it's nothing
significant. This just emits an `@xmlns` on the `package` element to
demonstrate use of the stack.
With that, it's time to formalize this.
I also need to document at some point why I choose to use `ArrayVec` still
over `Vec`---it's not a microoptimization. It's intended to simplify the
runtime to keep execution simple with fewer code paths and make it more
amenable to analysis. Memory allocation is a pretty complex thing and
muddies execution. It's also another point of failure, though practically
speaking, I'm not worried about that---this is replacing a system that
consumes many GiB of memory (XSLT-based compiler) with one that consumes 10s
of MiB.
DEV-13708
This (a) hold the state of a stack that I can populate with tokens rather
than introducing a state for every single e.g. attribute and such on
elements (so, more like the `xmle` XIR lowering).
It also hides the obvious awkwardness of the `&mut &'a Asg`, but that's not
the intent of it.
DEV-13708
This is just a special case of lowering with a context, and maintaining two
separate implementations has resulted in divergence. I don't recall why I
didn't do this previously, though it's possible that the lowering pipeline
was in a state that made it more difficult to do (e.g. with error
handling).
DEV-13708
Technically, an "acceptor" in the context of state machines is actually a
state machine; the terminology here is more describing the configuration of
the state machine (`XirToXirf`) as an acceptor.
This change comes with significant documentation of the rationale and why
this is important; see that for more information.
This change is necessary so that we can enforce finalization on all parsers
in the lowering pipeline, which is not currently being done. If we were to
do that now, then `tameld` would fail because it halts parsing of the tokens
stream at the end of the `xmlo` header.
This is also quite the type soup, but I'm not going to refine this further
right now, since my focus is elsewhere (XMLI lowering).
DEV-13708
This has been a long time coming. The wiring of it all together is a little
rough around the edges right now, but this commit represents a working POC
to begin to fill in the gaps for the entire lowering pipeline.
I had hoped to be at this point a year ago. Yeah.
This marks a significant milestone in the project because this allows me to
begin to observe the implementation end-to-end, testing it on real-life
inputs as part of a production build pipeline.
...and now, with that, we can begin. So much work has gone into this
project so far, but aside from the linker (which has been in production for
years), most of this work has been foundational. It's been a significant
investment that I intend to have pay off in many different ways.
(All this outputs right now is `<package/>`.)
DEV-13708
This replaces the stub `derive_xmli` with the same result (well, minus a
space before the '/' in the output) using what will become the lowering
pipeline. Once again, this is quite verbose, and the lowering pipeline in
general needs to be further abstracted away.
Unlike the rest of the pipeline, an error during the derivation process will
immediately terminate with an unrecoverable error, because we do not want to
write partial files. This does not remove the garbage file, because the
build system ought to do that itself (e.g. `make`)...but that is certainly
open for debate.
DEV-13708
The reader previously yielded a `ParsedResult`, presumably to simplify
lowering operations. But the reader is not a `ParseState`, and does not
otherwise use the parsing API, so this was an inappropriate and confusing
coupling.
This resolves that, introducing a new `lowerable` which will translate an
iterator into something that can be placed in a lowering pipeline.
See the previous commit for more information.
DEV-13708
The token type was previously hard-coded to `UnknownToken`, since the use
case was the beginning of the lowering pipeline at the start of the program,
where there was no token type because the first parser (`XirReader`,
currently) is responsible for producing the first token type.
But when we're lowering from the graph (so, the other side of the lowering
pipeline), we _do_ have token types to deal with.
This also emphasizes the inappropriate coupling of `<XirReader as
Iterator>::Item` with `ParsedResult`; I'd like to follow the same approach
that I'm about to introduce with `tamec`, so see a future commit.
DEV-13708
This was missed (because it was not used) when EOF tokens were originally
introduced via `ParseState::eof_tok`---`LowerIter` also needs to consider
the token.
This separation betwen the two iterators is a maintenance burden that needs
to be taken care of; I knew that at the time, and then I forgot about it,
and here we are.
This was caught while beginning to wire together a POC graph lowering
pipeline to emit derived sources.
DEV-13708
This parser does exactly what it says it does. Its implementation is
simple, but I added a test anyway just to prove that it works, and the test
seems more complicated than the implementation itself, given the types
involved.
DEV-13708
This introduces a `Token` in place of the original tuple for
`TreePreOrderDfs` so that it can be used as input to a parser that will
lower into XIRF.
This requires that various things be describable (using `Display`), which
this also adds. This is an example of where the parsing framework itself
enforces system observability by ensuring that every part of the system can
describe its state.
DEV-13708
This lowering operation is intended to allow me to write a more concise and
clear mapping from the graph to XIRF, without having to worry about
balancing tags, which really complicated the implementation.
This has details docs; see that for more information.
I can't help but be reminded of Wisp (the whitespace-based Lisp-like
syntax). Which is unfortunate, because I'm not fond of Wisp; I like my
parenthesis.
DEV-13708
The `TreePreOrderDfs` iterator needed to expose additional edge context to
the caller (specifically, the `Span`). This was getting a bit messy, so
this consolodates everything into a new `DynObjectRel`, which also
emphasizes that it is in need of narrowing.
Packing everything up like that also allows us to return more information to
the caller without complicating the API, since the caller does not need to
be concerned with all of those values individually.
Depth is kept separate, since that is a property of the traversal and is not
stored on the graph. (Rather, it _is_ a property of the graph, but it's not
calculated until traversal. But, depth will also vary for a given node
because of cross edges, and so we cannot store any concrete depth on the
graph for a given node. Not even a canonical one, because once we start
doing inlining and common subexpression elimination, there will be shared
edges that are _not_ cross edges (the node is conceptually part of _both_
trees). Okay, enough of this rambling parenthetical.)
DEV-13708
This information is necessary to be able to reconstruct the tree, since
the `ObjectIndex` alone does not give you enough information. Even if you
inspected the graph, it _still_ wouldn't give you enough information, since
you don't know the current path of the traversal for nodes that may have
multiple incoming edges. (Any assumptions you could make today won't
always be valid in the future.)
DEV-13708
This begins to introduce a graph traversal useful for a source
reconstruction from the current state of the ASG. The idea is to, after
having parsed and ingested the source through the lowering pipeline, to
re-output it to (a) prove that we have parsed correctly and (b) allow
progressively moving things from the XSLT-based compiler into TAMER.
There's quite a bit of documentation here; see that for more
information. Generalizing this in an appropriate way took some time, but I
think this makes sense (that work began with the introduction of cross edges
in terms of the tree described by the graph's ontology). But I do need to
come up with an illustration to include in the documentation.
DEV-13708
The `Pkg` span will now properly reflect the entire definition of the
package including the opening and closing tags.
This was found while I was working on a graph traversal.
DEV-13597
I noticed this while working on a graph traversal. The unit test used the
same span for both the reference _and_ the binding, so I didn't notice. -_-
The problem with this, though, is that we do not have a separate span
representing the source location of the identifier reference. The reason is
that we decided to re-use an existing node rather than creating another one,
which would add another inconvenient layer of indirection (and complexity).
So, I may have to add (optional?) spans to edges.
DEV-13708
This introduces the concept of ontological cross edges.
The term "cross edge" is most often seen in the context of graph traversals,
e.g. the trees formed by a depth-first search. This, however, refers to the
trees that are inherent in the ontology of the graph.
For example, an `ExprRef` will produce a cross edge to the referenced
`Ident`, that that is a different tree than the current expression. (Well,
I suppose technically it _could_ be a back edge, but then that'd be a cycle
which would fail the process once we get to preventing it. So let's ignore
that for now.)
DEV-13708
This causes a package definition to be rooted (so that it can be easily
accessed for a graph walk). This keeps consistent with the new
`ObjectIndex`-based API by introducing a unit `Root` `ObjectKind` and the
boilerplate that goes with it.
This boilerplate, now glaringly obvious, will be refactored at some point,
since its repetition is onerous and distracting.
DEV-13159
Included in this diff are the corresponding changes to the graph to support
the change. Adding the edge was easy, but we also need a way to get the
package for an identifier. The easiest way to do that is to modify the edge
weight to include not just the target node type, but also the source.
DEV-13159
This does not yet create edges from identifiers to the package; just getting
this introduced was quite a bit of work, so I want to get this committed.
Note that this also includes a change to NIR so that `Close` contains the
entity so that we can pattern-match for AIR transformations rather than
retaining yet another stack with checks that are already going to be done by
AIR. This makes NIR stand less on its own from a self-validation point, but
that's okay, given that it's the language that the user entered and,
conceptually, they could enter invalid NIR the same as they enter invalid
XML (e.g. from a REPL).
In _practice_, of course, NIR is lowered from XML and the schema is enforced
during that lowering and so the validation does exist as part of that
parsing.
These concessions speak more to the verbosity of the language (Rust) than
anything.
DEV-13159
Rather than panicing at this level, let's panic at the caller, simplifying
impls and keeping them total.
This can't occur now, but an upcoming change introducing a package type will
allow for such a thing.
DEV-13159
This hides information that's taking up a lot of space in the parser traces
and is not useful information. In particular, the `index` contains a lot of
empty space due to pre-interned symbols.
The index was going to be converted into a HashMap, but that was reverted
because the tradeoff did not make sense, and so this problem remains; see
the previous commit for more information.
DEV-13159
This reverts commit 1b7eac337cd5909c01ede3a5b3fba577898d5961.
I don't actually think this ends up being worth it in the end. Sure, the
implementation is simpler at a glance, but it is more complex at runtime,
adding more cycles for little benefit.
There are ~220 pre-interned symbols at the time of writing, so ~880 bytes (4
bytes per symbol) are potentially wasted if _none_ of the pre-interned
symbols end up serving as identifiers in the graph. The reality is that
some of them _will_ but, but using HashMap also introduces overhead, so in
practice, the savings is much less. On a fairly small package, it was <100
bytes memory saving in `tamec`. For `tameld`, it actually uses _more_
memory, especially on larger packages, because there are 10s of thousands of
symbols involved. And we're incurring a rehashing cost on resize, unlike
this original plain `Vec` implementation.
So, I'm leaving this in the history to reference in the future or return to
it if others ask; maybe it'll be worth it in the future.
This was originally written before there were a bunch of preinterned
symbols. Now the index vector is very sparse.
This simplifies things a bit. If this ends up manifesting as a bottleneck
in the future, we can revisit the implementation. While this does result in
more cycles, it's neglibable relative to the total cycle count.
This commit is what I've been sitting on for testing some of the recent
changes; it is a very basic demonstration of lowering all the way down
from source XML files into the ASG. This can be run on real files to
observe, beyond unit tests, how the system reacts.
Once this outputs data from the graph, we'll finally have tamec end-to-end
and can just keep filling the gaps.
I'm hoping to roll the desugaring process into NirToAir rather than having a
separate process as originally planned a couple of months back.
This also introduces the `wip-nir-to-air` feature flag. Currently,
interpolation will cause a `Nir::BindIdent` to be emitted in blocks that
aren't yet emitting NIR, and so results in an invalid parse.
DEV-13159
This adds support for identifier references, adding `Ident` as a valid edge
type for `Expr`.
There is nothing in the system yet to enforce ontology through levels of
indirection; that will come later on.
I'm testing these changes with a very minimal NIR parse, which I'll commit
shortly.
DEV-13597
This was originally created to populate Neo4J for querying, but it has not
been utilized. It's become a maintenance burden as I try to change the API
of and encapsulate the graph, which is important for upholding its
invariants.
This feature, or one like it, will return in the future. I have other
related plans; we'll see if they materialize.
The graph can't be encapsulated fully just yet because of the linker; those
commits will come in the following days.
DEV-13597
This allows for edges to be multiple types, and gives us two important
benefits:
(a) Compiler-verified correctness to ensure that we don't generate graphs
that do not adhere to the ontology; and
(b) Runtime verification of types, so that bugs are still memory safe.
There is a lot more information in the documentation within the patch.
This took a lot of iterating to get something that was tolerable. There's
quite a bit of boilerplate here, and maybe that'll be abstracted away better
in the future as the graph grows.
In particular, it was challenging to determine how I wanted to actually go
about narrowing and looking up edges. Initially I had hoped to represent
the subsets as `ObjectKind`s as well so that you could use them anywhere
`ObjectKind` was expected, but that proved to be far too difficult because I
cannot return a reference to a subset of `Object` (the value would be owned
on generation). And while in a language like C maybe I'd pad structures and
cast between them safely, since they _do_ overlap, I can't confidently do
that here since Rust's discriminant and layout are not under my control.
I tried playing around with `std::mem::Discriminant` as well, but
`discriminant` (the function) requires a _value_, meaning I couldn't get the
discriminant of a static `Object` variant without some dummy value; wasn't
worth it over `ObjectRelTy.` We further can't assign values to enum
variants unless they hold no data. Rust a decade from now may be different
and will be interesting to look back on this struggle.
DEV-13597
We only need a reference to the inner object, for which `AsRef` is the
proper and idiomatic solution.
There is a lot of boilerplate here that I hope to reduce in the future.
DEV-13597
ObjectRelTo is sufficient and, while I originally thought it was useful to
have it read left-to-right, it just ends up being a cognitive burden.
DEV-13597
I'm spending a lot of time considering how the future system will work,
which is complicating the needs of the system now, which is to re-output the
source XML so that we can selectively start to replace things.
So I'm going to punt on this.
I was also planning out how that edge reassignment out to work, along with
traits to try to enforce it, and that is also complicated, so I may wind up
wanting to leave them in the end, or handling this
differently. Specifically, I'll want to know how `value-of` expressions are
going to work on the graph first, since its target is going to be dynamic
and therefore not knowable at compile-time. (Rather, I know how I want to
make them work, but I want to observe that working in practice first.)
DEV-13597
There is extensive rationale in the documentation for this new macro. I'm
utilizing it to provide a more clear and friendly message for incomplete
ident resolution so that I can move on and return to those situations later.
It's worth noting that:
- Externs _will_ need to be handled in the near-term;
- Opaque and IdentFragment almost certainly won't be bound to a definition
until I introduce LTO, which is quite a ways off; and
- They may use the same mechanism and so may be able to be handled at the
same time anyway.
DEV-13597
The ASG delegates certain operations to Objects so that they may enforce
their own invariants and ontology. It is therefore important that only
objects have access to certain methods on `Asg`, otherwise those invariants
could be circumvented.
It should be noted that the nesting of this module is such that AIR should
_not_ have privileged access to the ASG---it too must utilize objects to
ensure those invariants are enforced in a single place.
DEV-13597
Starting to re-organize things to match my mental model of the new system;
the ASG abstraction has changed quite a bit since the early days.
This isn't quite enough, though; see next commit.
DEV-13597
This provides the initial implementation allowing an identifier to be
defined (bound to an object and made transparent).
I'm not yet entirely sure whether I'll stick with the "transparent" and
"opaque" terminology when there's also "declare" and "define", but a
`Missing` state is a type of declaration and so the distinction does still
seem to be important.
There is still work to be done on `ObjectIndex::<Ident>::bind_definition`,
which will follow. I'm going to be balancing work to provide type-level
guarantees, since I don't have the time to go as far as I'd like.
DEV-13597
This seems to have been an oversight from when I recently introduced SPairs
to ASG; I noticed it while working on another change and receiving back a
`DUMMY_SPAN`.
DEV-13597
`Ident` is now `Opaque`, but the new `Transparent` state isn't actually used
yet in any transitions; that'll come next.
The original (now "opaque") identifiers were added for the linker, which
does not need (at present) the associated expressions, since they've already
been compiled. In the future I'd like to do LTO (link-time optimization),
and then the graph will need more information.
DEV-13160
Some investigation into the disassembly of TAMER's binaries showed that Rust
was not able to conditionalize `expect`-like expressions as I was hoping due
to eager evaluation language semantics in combination with the use of
`format!`.
This solves the problem for the diagnostic system be creating types that
prevent this situation from occurring statically, without the need for a
lint.
This invokes clippy as part of `make check` now, which I had previously
avoided doing (I'll elaborate on that below).
This commit represents the changes needed to resolve all the warnings
presented by clippy. Many changes have been made where I find the lints to
be useful and agreeable, but there are a number of lints, rationalized in
`src/lib.rs`, where I found the lints to be disagreeable. I have provided
rationale, primarily for those wondering why I desire to deviate from the
default lints, though it does feel backward to rationalize why certain lints
ought to be applied (the reverse should be true).
With that said, this did catch some legitimage issues, and it was also
helpful in getting some older code up-to-date with new language additions
that perhaps I used in new code but hadn't gone back and updated old code
for. My goal was to get clippy working without errors so that, in the
future, when others get into TAMER and are still getting used to Rust,
clippy is able to help guide them in the right direction.
One of the reasons I went without clippy for so long (though I admittedly
forgot I wasn't using it for a period of time) was because there were a
number of suggestions that I found disagreeable, and I didn't take the time
to go through them and determine what I wanted to follow. Furthermore, it
was hard to make that judgment when I was new to the language and lacked
the necessary experience to do so.
One thing I would like to comment further on is the use of `format!` with
`expect`, which is also what the diagnostic system convenience methods
do (which clippy does not cover). Because of all the work I've done trying
to understand Rust and looking at disassemblies and seeing what it
optimizes, I falsely assumed that Rust would convert such things into
conditionals in my otherwise-pure code...but apparently that's not the case,
when `format!` is involved.
I noticed that, after making the suggested fix with `get_ident`, Rust
proceeded to then inline it into each call site and then apply further
optimizations. It was also previously invoking the thread lock (for the
interner) unconditionally and invoking the `Display` implementation. That
is not at all what I intended for, despite knowing the eager semantics of
function calls in Rust.
Anyway, possibly more to come on that, I'm just tired of typing and need to
move on. I'll be returning to investigate further diagnostic messages soon.
This introduces a number of abstractions, whose concepts are not fully
documented yet since I want to see how it evolves in practice first.
This introduces the concept of edge ontology (similar to a schema) using the
type system. Even though we are not able to determine what the graph will
look like statically---since that's determined by data fed to us at
runtime---we _can_ ensure that the code _producing_ the graph from those
data will produce a graph that adheres to its ontology.
Because of the typed `ObjectIndex`, we're also able to implement operations
that are specific to the type of object that we're operating on. Though,
since the type is not (yet?) stored on the edge itself, it is possible to
walk the graph without looking at node weights (the `ObjectContainer`) and
therefore avoid panics for invalid type assumptions, which is bad, but I
don't think that'll happen in practice, since we'll want to be resolving
nodes at some point. But I'll addres that more in the future.
Another thing to note is that walking edges is only done in tests right now,
and so there's no filtering or anything; once there are nodes (if there are
nodes) that allow for different outgoing edge types, we'll almost certainly
want filtering as well, rather than panicing. We'll also want to be able to
query for any object type, but filter only to what's permitted by the
ontology.
DEV-13160
Working with the graph can be confusing with all of the layers
involved. This begins to provide a better layer of abstraction that can
encapsulate the concept and enforce invariants.
Since I'm better able to enforce invariants now, this also removes the span
from the diagnostic message, since the invariant is now always enforced with
certainty. I'm not removing the runtime panic, though; we can revisit that
if future profiling shows that it makes a negative impact.
DEV-13160
This addresses the two outstanding `todo!` match arms representing errors in
lowering expressions into the graph. As noted in the comments, these errors
are unlikely to be hit when using TAME in the traditional way, since
e.g. XIR and NIR are going to catch the equivalent problems within their own
contexts (unbalanced tags and a valid expression grammar respectively).
_But_, the IR does need to stand on its own, and I further hope that some
tooling maybe can interact more directly with AIR in the future.
DEV-13160
This introduces a number of concepts together, again to demonstrate that
they were derived.
This introduces support for nested expressions, extending the previous
work. It also supports error recovery for dangling expressions.
The parser states are a mess; there is a lot of duplicate code here that
needs refactoring, but I wanted to commit this first at a known-good state
so that the diff will demonstrate the need for the change that will
follow; the opportunities for abstraction are plainly visible.
The immutable stack introduced here could be generalized, if needed, in the
future.
Another important note is that Rust optimizes away the `memcpy`s for the
stack that was introduced here. The initial Parser Context was introduced
because of `ArrayVec` inhibiting that elision, but Vec never had that
problem. In the future, I may choose to go back and remove ArrayVec, but I
had wanted to keep memory allocation out of the picture as much as possible
to make the disassembly and call graph easier to reason about and to have
confidence that optimizations were being performed as intended.
With that said---it _should_ be eliding in tamec, since we're not doing
anything meaningful yet with the graph. It does also elide in tameld, but
it's possible that Rust recognizes that those code paths are never taken
because tameld does nothing with expressions. So I'll have to monitor this
as I progress and adjust accordingly; it's possible a future commit will
call BS on everything I just said.
Of course, the counter-point to that is that Rust is optimizing them away
anyway, but Vec _does_ still require allocation; I was hoping to keep such
allocation at the fringes. But another counter-point is that it _still_ is
allocated at the fringe, when the context is initialized for the parser as
part of the lowering pipeline. But I didn't know how that would all come
together back then.
...alright, enough rambling.
DEV-13160
I had wanted to implement expression operations in terms of user-defined
functions (where primitives are just marked as intrinsic), and would still
like to, but I need to get this thing working, so I'll just include a note
for now.
Yes, TAMER's formalisms are inspired by APL, if that hasn't been documented
anywhere yet.
DEV-13160
This commit is purposefully coupled with changes that utilize it to
demonstrate that the need for this abstraction has been _derived_, not
forced; TAMER doesn't aim to be functional for the sake of it, since
idiomatic Rust achieves many of its benefits without the formalisms.
But, the formalisms do occasionally help, and this is one such
example. There is other existing code that can be refactored to take
advantage of this style as well.
I do _not_ wish to pull an existing functional dependency into TAMER; I want
to keep these abstractions light, and eliminate them as necessary, as Rust
continues to integrate new features into its core. I also want to be able
to modify the abstractions to suit our particular needs. (This is _not_ a
general recommendation; it's particular to TAMER and to my experience.)
This implementation of `Functor` is one such example. While it is modeled
after Haskell in that it provides `fmap`, the primitive here is instead
`map`, with `fmap` derived from it, since `map` allows for better use of
Rust idioms. Furthermore, it's polymorphic over _trait_ type parameters,
not method, allowing for separate trait impls for different container types,
which can in turn be inferred by Rust and allow for some very concise
mapping; this is particularly important for TAMER because of the disciplined
use of newtypes.
For example, `foo.overwrite(span)` and `foo.overwrite(name)` are both
self-documenting, and better alternatives than, say, `foo.map_span(|_|
span)` and `foo.map_symbol(|_| name)`; the latter are perfectly clear in
what they do, but lack a layer of abstraction, and are verbose. But the
clarity of the _new_ form does rely on either good naming conventions of
arguments, or explicit type annotations using turbofish notation if
necessary.
This will be implemented on core Rust types as appropriate and as
possible. At the time of writing, we do not yet have trait specialization,
and there's too many soundness issues for me to be comfortable enabling it,
so that limits that we can do with something like, say, a generic `Result`,
while also allowing for specialized implementations based on newtypes.
DEV-13160
Really, with a C background, I should have known that `write` may not write
all bytes, and I'm pretty sure I was aware, so I'm not sure how that slipped
my mind for every call. But it's not a great default, and I do feel like
`write_all` should be the deafult behavior, despite the syscall and C
library name.
It shouldn't take clippy to warn about something so significant.
This uses `ObjectIndex` to automatically narrow the type to what is
expected.
Given that `ObjectIndex` is supposed to mean that there must be an object
with that index, perhaps the next step is to remove the `Option` from `get`
as well.
DEV-13160
This makes the system a bit more ergonomic and introduces additional type
safety by associating the narrowed object type with the
`ObjectIndex` (previously `ObjectRef`). Not only does this allow us to
explicitly state the type of object wherever those indices are stored, but
it also allows the API to automatically narrow to that type when operating
on it again without the caller having to worry about it.
DEV-13160
This begins to place expressions on the graph---something that I've been
thinking about for a couple of years now, so it's interesting to finally be
doing it.
This is going to evolve; I want to get some things committed so that it's
clear how I'm moving forward. The ASG makes things a bit awkward for a
number of reasons:
1. I'm dealing with older code where I had a different model of doing
things;
2. It's mutable, rather than the mostly-functional lowering pipeline;
3. We're dealing with an aggregate ever-evolving blob of data (the graph)
rather than a stream of tokens; and
4. We don't have as many type guarantees.
I've shown with the lowering pipeline that I'm able to take a mutable
reference and convert it into something that's both functional and
performant, where I remove it from its container (an `Option`), create a new
version of it, and place it back. Rust is able to optimize away the memcpys
and such and just directly manipulate the underlying value, which is often a
register with all of the inlining.
_But_ this is a different scenario now. The lowering pipeline has a narrow
context. The graph has to keep hitting memory. So we'll see how this
goes. But it's most important to get this working and measure how it
performs; I'm not trying to prematurely optimize. My attempts right now are
for the way that I wish to develop.
Speaking to #4 above, it also sucks that I'm not able to type the
relationships between nodes on the graph. Rather, it's not that I _can't_,
but a project to created a typed graph library is beyond the scope of this
work and would take far too much time. I'll leave that to a personal,
non-work project. Instead, I'm going to have to narrow the type any time
the graph is accessed. And while that sucks, I'm going to do my best to
encapsulate those details to make it as seamless as possible API-wise. The
performance hit of performing the narrowing I'm hoping will be very small
relative to all the business logic going on (a single cache miss is bound to
be far more expensive than many narrowings which are just integer
comparisons and branching)...but we'll see. Introducing branching sucks,
but branch prediction is pretty damn good in modern CPUs.
DEV-13160
This will be used for expression start and end spans to merge into a span
that represents the entirety of the expression; see future commits for its
use.
Though, this has been generalized further than that to ensure that it makes
sense in any use case, to avoid potential pitfalls.
DEV-13160
This adds a line of padding between the last line of a source marking and
the first line of a footer, making it easier to read. This also matches the
behavior of Rust's error message.
This is something I intended to do previously, but didn't have the
time. Not that I do now, but now that we'll be showing some more robust
diagnostics to users, it ought to look decent.
DEV-13430
This moves the special handling of circular dependencies out of
`poc.rs`---and to be clear, everything needs to be moved out of there---and
into the source of the error. The diagnostic system did not exist at the
time.
This is one example of how easy it will be to create robust diagnostics once
we have the spans on the graph. Once the spans resolve to the proper source
locations rather than the `xmlo` file, it'll Just Work.
It is worth noting, though, that this detection and error will ultimately
need to be moved so that it can occur when performing other operation on the
graph during compilation, such as type inference and unification. I don't
expect to go out of my way to detect cycles, though, since the linker will.
DEV-13430
This ASG implementation is a refactored form of original code from the
proof-of-concept linker, which was well before the span and diagnostic
implementations, and well before I knew for certain how I was going to solve
that problem.
This was quite the pain in the ass, but introduces spans to the AIR tokens
and graph so that we always have useful diagnostic information. With that
said, there are some important things to note:
1. Linker spans will originate from the `xmlo` files until we persist
spans to those object files during `tamec`'s compilation. But it's
better than nothing.
2. Some additional refactoring is still needed for consistency, e.g. use
of `SPair`.
3. This is just a preliminary introduction. More refactoring will come as
tamec is continued.
DEV-13041
The previous commit had the ASG implicitly constructed and then
discarded. This will keep it around, which will be necessary not only for
imports, but for passing the ASG off to the next phases of lowering.
DEV-13429
This does not yet yield the produces ASG, but does set up the lowering
pipeline to prepare to produce it. It's also currently a no-op, with
`NirToAsg` just yielding `Incomplete`.
The goal is to begin to move toward vertical slices for TAMER as I start to
return to the previous approach of a handoff with the old compiler. Now
that I've gained clarity from my previous failed approach (which I
documented in previous commits), I feel that this is the best way forward
that will allow me to incrementally introduce more fine-grained performance
improvements, at the cost of some throwaway work as this progresses. But
the cost of delay with these build times is far greater.
DEV-13429
This finalizes the implementation for interpolation. There is some more
cleanup that can be done, but it is now functioning as intended and
providing errors.
Finally. How deeply exhausting all of this has been.
DEV-13156
This just cleans up these tests a bit before I add to them. What we're left
with follows the structure of most other parser tests and is atm a good
balance between boilerplate and clarity in isolation (a fair level of
abstraction).
Could possibly do better by putting the inner objects in a callback so that
the `Close` can be asserted on commonly as well, but that's a bit awkward
with how the assertion is based on the collection; we'd have to keep the
last item from being collected from the iterator. I'd rather not deal with
such restructuring right now and figuring out a decent pattern. Perhaps in
the future.
DEV-13156
This is the culmination of all the recent work---the third attempt at trying
to integrate this. It ended up much cleaner than what was originally going
to be done, but only after gutting portions of the system and changing my
approach to how NIR is parsed (WRT attributes). See prior commits for more
information.
The final step is to fill the error branches with actual errors rather than
`todo!`s.
What a relief.
DEV-13156
This begins to introduce the new, simplified NIR by creating tokens that
serve as the expansion for interpolation. Admittedly, `Text` may change, as
it doesn't really represent `<text>foo</text>`, and I'd rather that node
change as well, though I'll probably want to maintain some sort of BC.
DEV-13156
This removes quite a bit of work, and work that was difficult to reason
about. While I'm disappointed that that hard work is lost (aside from
digging it up in the commit history), I am happy that it was able to be
removed, because the extra complexity and cognitive burden was significant.
This removes more `memcpy`s than the sum state could have hoped to, since
aggregation is no longer necessary. Given that, there is a slight
performacne improvement. The re-introduction of required and duplicate
checks later on should be more efficient than this was, and so this should
be a net win overall in the end.
DEV-13346
This cleans up the old implementation now that it's no longer used (as of
the previous commit) by `ele_parse!`. It also removes the two error
variants that no longer apply: required attributes and duplicate
attributes.
DEV-13346
This handles the bulk of the integration of the new `attr_parse_stream!` as
a replacement for `attr_parse!`, which moves from aggregate attribute
objects to a stream of attribute-derived tokens. Rationale for this change
is in the preceding commit messages.
The first striking change here is how it affects the test cases: nearly all
`Incomplete`s are removed. Note that the parser has an existing
optimization whereby `Incomplete` with lookahead causes immediate recursion
within `Parser`, since those situations are used only for control flow and
to keep recursion out of `ParseState`s.
Next: this removes types from `nir::parse`'s grammar for attributes. The
types will instead be derived from NIR tokens later in the lowering
pipeline. This simplifies NIR considerably, since adding types into the mix
at this point was taking an already really complex lowering phase and making
it ever more difficult to reason about and get everything working together
the way that I needed.
Because of `attr_parse_stream!`, there are no more required attribute
checks. Those will be handled later in the lowering pipeline, if they're
actually needed in context, with possibly one exception: namespace
declarations. Those are really part of the document and they ought to be
handled _earlier_ in the pipeline; I'll do that at some point. It's not
required for compilation; it's just required to maintain compliance with the
XML spec.
We also lose checks for duplicate attributes. This is also something that
ought to be handled at the document level, and so earlier in the pipeline,
since XML cares, not us---if we get a duplicate attribute that results in an
extra NIR token, then the next parser will error out, since it has to check
for those things anyway.
A bunch of cleanup and simplification is still needed; I want to get the
initial integration committed first. It's a shame I'm getting rid of so
much work, but this is the right approach, and results in a much simpler
system.
DEV-13346
Mike Gerwitz