Okay, this is finally distilling into something fairly simple and
reasonable, but I'm not quite there yet.
In particular, the responsibility is simply between `Asg` (as the owner of
the index) and `AirAggregateCtx` (as the owner of the stack frames from
which environments and scope are derived). This was inevitable and I was
waiting for it, but now I have a good idea of how to clean it up and
proceed.
This also doesn't index in root yet (`active_rooting_oi` is still `None` for
`Root`), and I think I may remove `Pool` and just make it `Visible` at that
point, since it won't be going any further anyway. I don't think the
distinction is meaningful and will just complicate implementations.
The tests also need some more cleanup---the assertions ideally would live in
independent tests, and the assertion failure is in a function call rather
than the test (function) itself, so requires a Rust backtrace to locate the
line number of (unless you look at the failure data).
So I suppose this is more of a mental synchronization point than
anything. Nothing's broken, though.
DEV-13162
There's a lot of documentation on this in the commit itself, but this stems
from
a) frustration with trying to understand how the system needs to operate
with all of the objects involved; and
b) recognizing that if I'm having difficulty, then others reading the
system later on (including myself) and possibly looking to improve upon
it are going to have a whole lot of trouble.
Identifier scope is something I've been mulling over for years, and more
formally for the past couple of months. This finally begins to formalize
that, out of frustration with package imports. But it will be a weight
lifted off of me as well, with issues of scope always looming.
This demonstrates a declarative means of testing for scope by scanning the
entire graph in tests to determine where an identifier has been
scoped. Since no such scoping has been implemented yet, the tests
demonstrate how they will look, but otherwise just test for current
behavior. There is more existing behavior to check, and further there will
be _references_ to check, as they'll also leave a trail of scope indexing
behind as part of the resolution process.
See the documentation introduced by this commit for more information on
that part of this commit.
Introducing the graph scanning, with the ASG's static assurances, required
more lowering of dynamic types into the static types required by the
API. This was itself a confusing challenge that, while not all that bad in
retrospect, was something that I initially had some trouble with. The
documentation includes clarifying remarks that hopefully make it all
understandable.
DEV-13162
This begins demonstrating that the root will be utilized for identifier
lookup and indexing, as it was originally for TAME and is currently for the
linker.
This was _not_ the original plan---the plan was to have identifiers indexed
only at the package level, at least until we need a global lookup for
something else---but that plan was upended by how externs are currently
handled. So, for now, we need a global scope.
(Externs are resolved by the linker in such a way that _any_ package that
happens to be imported transitively may resolve the import. This is a
global environment, which I had hoped to get rid of, and which will need to
eventually go away (possibly along with externs) to support loading multiple
programs into the graph simultaneously for cross-program analysis.)
This commit renames the base state for `AirAggregate` to emphasize the fact,
especially when observing it in the `AirStack`, and changes
`AirAggregateCtx::lookup_lexical_or_missing` to resolve from the _bottom_ of
the stack upward, rather than reverse, to prove that the system still
operates correctly with this change in place.
The reason for this direction change is to simplify lookup in the most
general case of non-local identifiers, which are almost all of them in
practice---they'll be immediately resolved at the root once they're
indexed. This can be done because I determined that I will _not_ support
shadowing; rationale for that will come later, but TAME is intended to be a
language suitable for non-programmer audiences as well. Note that
identifiers will be resolved lexically within templates in TAMER, unlike
TAME, which means that the expansion context will _not_ be considered when
checking for shadowing, so templates will still be able to compose without a
problem so long as they do not shadow in their definition context. (I'll
have to consider how that affects template-generating templates later on,
but that's an ambiguous construction in TAME today anyway.)
This _does not_ yet index anything at the root where it wasn't already being
indexed explicitly.
DEV-13162
This requires the name as part of the package definition, which in turn
removes a state (and all the combinations resulting from it) from
AirAggregate, which results in significant complexity reduction for a very
complex part of the system.
Pushing this complexity outward results in a reduction of overall
complexity, and obviates the question of where NIR will receive a generated
name.
DEV-13162
The comment speaks for itself.
My concern is that this will be especially off-putting to people looking at
TAMER and wondering how one could possibly work with this system.
DEV-13162
This is something I've wanted to do for some time, but the system is
becoming hard enough to reason about (with some attempted future changes)
that I require the consistency afforded by this change.
It's not entirely done---as noted by the TODO for `UnnamedPkg`---but it's
close, and then `AirAggregate` will just be a delegating superstate, like
`ele_parse!`.
Importantly, this also puts a package parser on the stack, which will work
better with the stack-based scoping system being developed. It will also
make it easier to fall back to a base case that I had really wanted to
avoid, and will have more information on in the future: root indexing for a
shared global environment for package-level identifiers. (Imports are still
package-scoped, but only in appearance, by contributing to the global
environment of the compilation unit during import. Well, it doesn't do that
yet. The XSLT compiler works in that way.)
DEV-13162
This is one of many changes that have been lingering that I need to start to
break apart in an attempt to commit the confusing and disappointing
conclusion to this package loading madness.
More information to come.
DEV-13162
I had apparently forgotten about this, because I didn't benefit from the
exhaustiveness check; this needs to be eliminated so that this doesn't
happen again, and to provide a proper non-panicking error.
DEV-13162
This reverts commit da7fe96254e425bc7b75f8cf454465b71e27e372.
I'm a fool---this would be pursuant to a future plan that removes AirIdent
opaque tokens. But for now, I need it on IdentDecl and others, which
currently has a `Source` (that I want to go away, as just mentioned), which
contains the same information.
So maybe more to come on this...
DEV-13162
This allows for a canonical package name to be optionally provided to
explicitly resolve a reference against, avoiding a lexical lookup.
This change doesn't actually utilize this new value yet; it just
retains BC. The new argument will be used for the linker, since it already
knows the package that defined an identifier while reading the object file's
symbol table. It will also be used by tamec for the same purposes while
processing package imports.
DEV-13162
-- squashed with --
tamer: asg::air::ir::RefIdent: CanonicalName=SPair
The use of CanonicalName created an asymmetry between RefIdent and
BindIdent. The hope was to move CanonicalName instantiation outside of AIR
and into NIR, but doing so would be confusing and awkward without doing
something with BindIdent.
I don't have the time to deal with that for now, so let's observe how the
system continues to evolve and see whether hoisting it out makes sense in the
end. For now, this works just fine and I need to move on with the actual
goal of finishing package imports so that I can expand templates.
DEV-13162
NOTE: This fixes the aforementioned commit that caused the linker to
temporarily fail (670c5d3a5d at time of
writing). This does introduce an extra forward slash into
`l:dep/preproc:sym/@src`, but that does not appear to cause any
problems. That will eventually go away, so I'm not going to bother with it
any further.
As the `xmlo` file is lowered into AIR, the name will be prefixed with a
leading slash (if necessary, which it is atm) and will emit an
`Air::BindIdent`.
This means that packages will be properly indexed by their canonical name on
load, which will be important when we share this with tamec.
DEV-13162
This change requires every package to have a canonical name, and performs
namespec canonicalization on imports.
Since all package names are canonicalized, this opens the door to being able
to index package names at import, allowing the object to be shared on the
graph and properly reference a package after it has been resolved.
Note that the system tests' canonicalization is relative to the hard-coded
`/TODO` presently; that will change in the near future once `tamec`
generates names from the provided path.
DEV-13162
This introduces, but does not yet integrate, `CanonicalName`, which not only
represents canonicalized package names, but handles namespec resolution.
The term "namespec" is motivated by Git's use of *spec (e.g. refspec)
referring to various ways of specifying a particular object. Names look
like paths, and are derived from them, but they _are not paths_. Their
resolution is a purely lexical operation, and they include a number of
restrictions to simplify their clarity and handling. I expect them to
evolve more in the future, and I've had ideas to do so for quite some time.
In particular, resolving packages in this way and then loading the from the
filesystem relative to the project root will ensure that
traversing (conceptually) to a parent directory will not operate
unintuitively with symlinks. The path will always resolve unambigiously.
(With that said, if the symlink is to a shared directory with different
directory structures, that doesn't solve the compilation problem---we'll
have to move object files into a project-specific build directory to handle
that.)
Span Slicing
------------
Okay, it's worth commenting on the horridity of the path name slicing that
goes on here. Care has been taken to ensure that spans will be able to be
properly sliced in all relevant contexts, and there are plenty of words
devoted to that in the documentation committed here.
But there is a more fundamental problem here that I regret not having solved
earlier, because I don't have the time for it right now: while we do have
SPair, it makes no guarantees that the span associated with the corresponding
SymbolId is actually the span that matches the original source lexeme. In
fact, it's often not.
This is a problem when we want to slice up a symbol in an SPair and produce
a sensible span. If it _is_ a source lexeme with its original span, that's
no problem. But if it's _not_, then the two are not in sync, and slicing up
the span won't produce something that actually makes sense to the user. Or,
worse (or maybe it's not worse?), it may cause a panic if the slicing is out
of bounds.
The solution in the future might be to store explicitly the state of an
SPair, or call it Lexeme, or something, so that we know the conditions under
which slicing is safe. If I ever have time for that in this project.
But the result of the lack of a proper abstraction really shows here: this
is some of the most confusing code in TAMER, and it's really not doing
anything all that complicated. It is disproportionately confusing.
DEV-13162
NOTE: This temporarily breaks `tameld`. It is fixed in a future commit when
names are bound. This was an oversight when breaking apart changes into
separate commits, because the linker does not yet have system tests like
tamec does.
This is preparing for a full transition to requiring a canonical package
name. The previous `Unnamed` variant has been removed and `AirAggregate`
will provide a default `WS_EMPTY` name, as `Pkg` had done before.
The intent of this change is to allow for consulting the index before a
new `Pkg` object is created on the graph, but we're not quite ready for that
yet.
Well, that's not entirely true---the linker can be ready for that. But the
compiler needs to canonicalize import paths relative to the active package
canonical name, which it can't even do yet because tamec isn't generating a
name.
So maybe the linker will be first; it's useful to have that in a separate
commit anyway to emphasize the change.
DEV-13162
...this has apparently been consuming errors for some time. This would
cause the parser to enter an invalid state in some cases and terminate.
This would _not_ permit an invalid link, as the graph would not be correct,
but it was masking the actual error.
This part of linker is in dire need of tests. This also ought to be
replaced with tamec's approach of reporting all errors.
DEV-13162
The previous commit introduced canonical names, and this uses them to index.
The next step will be to utilize those names to look up packages on
definition rather than creating a new package node, so that references to
yet-to-be-defined (or yet-to-be-imported) packages can be resolved on the
graph.
DEV-13162
This is already a concept in the XSLT-based compiler, where each package has
a `package/@name` generated from its path. The same will happen with tamec.
Before we can load packages into the graph, we need canonical identifiers so
that they can be indexed. The next commit will handle indexing using this
information.
DEV-13162
The documentation explains the intent here---existing LaTeX documentation.
The intent was to simply copy the documentation into a LaTeX document based
on the lvspec package that I had created long ago. Of course, that's not
appropriate---we're a DSL and should provide first-class support for
documentation that will compile properly into the target format, whether it
be LaTeX, HTML, JS, or anything else.
DEV-13162
These have been a pain in the ass since TAMER began.
It seemed like a good idea at the time to have static code generated in this
way, but the lack of explicit dependencies just makes this a mess and works
against the operating theory of the system.
Furthermore, the _same_ static fragments were generated for each and every
map package.
There is still a post-link step (standalones) handled in XSLT; the
previously-static code has been moved there. This will eventually be
integrated into tameld itself, once TAMER has facilities for JS generation.
(This was discovered while trying to parent identifiers to packages.)
DEV-13162
With the previous commit using a visitor implemented within the `asg`
module, we can now finally encapsulate the graph. This is a wonderfully
liberating, long-awaited change, since I have been fighting with the lack of
encapsulation for some time; it has made certain changes challenging and has
made the system more difficult to reason about. It also made it impossible
to assert that invariants were _actually_ properly enforced, if things could
just peer into and modify the graph directly, out from underneath the API
that provides those assurances.
This also removes our dependency on Petgraph outside of the `asg`
module. There are no plans to migrate away from it currently; we'll see how
the graph continues to evolve over time and what redundancies are introduced
with our data structures. It may render petgraph unnecessary.
Interestingly, because my DFS implementation is so similar to Petgraph's,
the emitted ordering is _identical_ between this commit and the previous.
DEV-13162
This integrates the new topological sort, replacing the previous
implementation in the linker.
This will now allow encapsulating the graph, finally, and ensures that
future changes can be fully maintained within the `asg` module.
More cleanup will come over time.
DEV-13162
This commit includes plenty of documentation, so you should look there.
It's desirable to describe the sorting that TAME performs as a topological
sort, since that's the end result we want. This uses the ontology to
determine what to do to the graph when a cycle is encountered. So
technically we're sorting a graph with cycles, but you can equivalently view
this as first transforming the graph to cut all cycles and then sorting it.
For the sake of trivia, the term "cut" is used for two reasons: (1) it's an
intuitive visualization, and (2) the term "cut" has precedence in logic
programming (e.g. Prolog), where it (`!`) is used to prevent
backtracking. We're also preventing backtracking, via a back edge, which
would produce a cycle.
DEV-13162
This introduces cycle detection, but it does not yet filter ontologically
permitted cycles, which will be needed prior to utilizing this in `tameld`.
There's a considerable amount of documentation here. While the
implementation is fairly simple, there are important algorithmic decisions,
both in the DFS construction and the derivation of the cycle path from data
that already exists.
This also supports recovery (by ignoring cycles), which can then be utilized
to find more cycles and other errors in the system.
DEV-13162
This is an initial implementation that does not yet produce errors on
cycles. Documentation is not yet complete.
The implementation is fairly basic, and similar to Petgraph's DFS.
A terminology note: the DFS will be ontology-aware (or at least aware of
edge metadata) to avoid traversing edges that would introduce cycles in
situations where they are permitted, which effectively performs a
topological sort on an implicitly _filtered_ graph.
This will end up replacing ld::xmle::lower::sort.
DEV-13162
tameld isn't yet adding edges to Idents from their associated Pkg (see
previous commit), but this formalizes how the ontology will interpret such a
relationship. The idea is that Idents are always owned by Pkgs, but they
may be optionally explicitly rooted, which will be used by a particular type
of DFS walk that is about to be written, which can ignore Root->Pkg and
focus instead on cross edges to Idents.
Though it's not lost on me that now that I'll be introducing a DFS for the
linker, the terms "cross" and "tree" edge now become ambiguous; I used to
call them "ontological X edge", but I had fallen out of that habit; perhaps
I need to reintroduce that rigor.
DEV-13162
This modifies the xmlo reader, xmlo->AIR lowering, and AIR->ASG to introduce
a package for identifiers. It does not yet, however, add edges from the
package to the identifier.
Once edges are added, the DFS will change in undesirable ways, which will
require a new implementation. This is desirable to decouple from Petgraph
anyway, and then will be able to restore the prior single-pass sort+cycle
check.
That will also encapsulate visiting behavior within the `asg::graph` module
and, in turn, allow encapsulating `Asg.graph` finally.
DEV-13162
This doesn't go far enough, but it elaborates a bit---the existing was far
too much of a catch-all. It's important to take advantage of exhaustiveness
checks to ensure each transition is properly accounted for.
This parser is going to get more work over time, including right now, so I'm
not going to go too deep into this yet, but it's be useful (as a reader) to
compare it to e.g. asg::air's parsers' explicit enumeration of states and
favoring of explicit errors over dead state transitions.
DEV-13162
This may now index _any_ type of object, in preparation for indexing package
import paths. In practice, this only makes sense (at least currently) for
`Pkg` and `Ident`.
This generalization also applies to `Asg::lookup_or_missing`.
DEV-13162
Historically, the ASG was better described as a "dependency graph",
containing only identifiers (which are simply called "symbols" in the
XSLT-based compiler). Consequently, it was appropriate for the graph to
have operations specific to identifiers. (Indeed, that's the only type of
object the graph supported.)
Much has changed since then. This cleans things up, and makes parenting
identifiers to root an _explicit_ operation. This will make it easier to
move forward with handling of scope, and importing identifiers into
packages, and removing `Source`, and so on.
DEV-13162
I've been torturing myself trying to figure out how I want to generalize
indexing, lookups, and value numbering in a way that is appropriate for this
project (that is, not over-engineered relative to my needs).
Before I can do much of anything, though, I need to stop having indexing
only as a `Root` thing (previously it wasn't even tied to `Root`). This
makes that change for tamec, but temporarily removes scoping concerns until
I can add more specific types of indexing.
Not only does this allow cleaning up some `Ident`-specific stuff from `Asg`,
but the cleanup also helps to show that portions of the system aren't still
using Root-based globals.
The linker (`tameld`) still uses the old `global` methods for now; those
will eventually go away, but this needs to change to unify both tamec and
tameld once we get to imports as part of the compiler.
DEV-13162
This is needed to then support `@desc` for shorthand desugaring; it's
required by the XSLT-based compiler (and will eventually be required by
TAMER too).
DEV-13708
XIRF->Nir produces `Todo` and `TodoAttr` tokens for many different
things. The previous approach was to ignore those things so that I could
begin adding portions of packages to the graph and observe how that goes.
But now that I'm starting to be able to compile certain packages that
utilize only small subsets of TAME features, I need to have confidence that
I'm fully parsing them. This means rejecting tokens that I haven't yet
gotten to.
DEV-13708
This supports arbitrary documentation as sibling text (mixed content, in XML
terms). The motivation behind this change is to permit existing system
tests to succeed when `Todo | TodoAttr` are both rejected, rather than
having to ignore this.
TAME has always had a philosophy of literate documentation, however it was
never fully realized. This just maintains the status quo; the text is
unstructured, and maybe will be parsed in the future.
Unfortunately, this does _not_ include the output in the `xmli` file or the
system tests. The reason has nothing to do with TAMER---`xmllint` does not
format the output when there is mixed content, it seems, and I need to move
on for now; I'll consider my options in the future. But, it's available on
the graph and ready to go.
DEV-13708
This _only_ re-introduces for PackageStmt since that's all I have tests for
at present. More will be re-added later.
They were previously removed when the attribute parsing was upended in
`ele_parse!`.
This does lose the attribute name, compared to before; that'll ideally be
re-added, and I'll explore options for doing so later, since I also want
them in other contexts. But it needs to be done generically (not
XML-related).
This had to be done before blowing up on TODOs, or system tests would fail.
DEV-13708
This is in preparation for throwing errors (with diagnostic information) on
yet-to-be-supported tokens, so that I can confidently compile individual
packages without worrying that something is just being ignored.
This makes obvious that `ele_parse!` had a different design in mind
previously, and it's now resulting in a lot of boilerplate; I'll address
that in the future once I'm certain requirements have been settled on, since
I've spent far too much time on it to waste more.
DEV-13708
This introduces a new `Doc` object that can be owned by `Expr` (only atm)
and contain what it describes as a concise independent clause. This
construction is not enforced, and is only really obvious today via the
Summary Pages.
There's a lot of latent and unrealized potential in TAME's documentation
philosophy that was never realized, so this will certainly evolve over
time. But for now, the primary purpose was to get `@desc` working on things
like classifications so that `xmli` output can compile for certain
packages.
DEV-13708
These are used by virtually every `ObjectKind`; I've been meaning to do this
for a while, but now that I'm about to introduce a new one (`Doc`), let's
just get it out of the way.
DEV-13708
This doesn't do the actual hard work yet of resolving and loading a package,
but it does place it on the graph and re-derive it into the xmli output.
DEV-13708
This introduces `<match on="foo" />` and `<match on="foo" value="bar" />`,
which are both equality predicates. Other types of predicates are not yet
supported.
This change is a bit messy and leaves a bit to be desired. `NirToAir` is
quite messy and needs some cleanup. There's also the issue of introducing
XML-specific errors in NIR so that users know what things like "subject"
mean, but not being able to do so yet because NIR is agnostic to the source
document type; another layer of abstraction is needed.
But, my priority is first to get derivation of a particularly
expensive (generated) package in our internal systems working first.
DEV-13708
The alternative I was floating was a tagged `Ref` (that is, with an enum
within it), but I settled on this for now, in part for a more concise
notation with the mapping in nir::parse.
We'll see how this evolves. For now, it's not important with the only thing
that uses ref in nir::parse, which is template application.
This was introduced for `match`, which is to come shortly.
DEV-13708
This recognizes template application within expressions. Since expressions
can occur within templates, this can occur arbitrarily deeply.
And with that, we have the core of the template system represented on the
graph. Of course, there are some glaring scoping issues to be resolved, but
those aren't unique to template application.
DEV-13708
I had hoped this would be considerably easier to implement, but there are
some confounding factors.
First of all: this accomplishes the initial task of getting nested template
applications and definitions re-output in the `xmli` file. But to do so
successfully, some assumptions had to be made.
The primary issue is that of scope. The old (XSLT-based) TAME relied on the
output JS to handle lexical scope for it at runtime in most situations. In
the case of the template system, when scoping/shadowing were needed, complex
and buggy XPaths were used to make a best effort. The equivalent here would
be a graph traversal, which is not ideal.
I had begun going down the rabbit hole of formalizing lexical scope for
TAMER with environments, but I want to get this committed and working first;
I've been holding onto this and breaking off changes for some time now.
DEV-13708
All ObjectIndex-like objects hash using only the underlying identifier,
which ultimately boils down to a `NodeIndex` (petgraph), which is just a
u32. And so in that sense, the only purpose we have for hashing it is to
(a) reduce the space required to store mappings, and (b) compose with other
`Hash`es.
DEV-13708
This creates another trait and struct `ObjectIndexToTree` that assert a
stronger invariant than `ObjectIndexRelTo`---that not only does it uphold
the invariants of `ObjectIndexRelTo`, but also that it represents a _tree_
edge, which indicates _ownership_ rather than just a reference.
This will be used to statically infer what can serve as a scope boundary for
upcoming changes. Specifically, anything that can own an `Ident` introduces
a new level of scope.
DEV-13708
This allows this method to be used on anything that is able to relate to an
identifier, which is needed for the changes being made for the template
system.
This linear lookup is actually going away (as hinted at by preceding
commits); this is extracted as part of a larger change and I wanted to get
it committed to make it easier to follow upcoming changes.
DEV-13708
The prior commit begins to explain the end goal of being able to index
identifiers outside of the global environment.
This change continues to index things as before, but introduces a new key
based on the pair of the symbol id together with a node that is _part of_
its target environment. The only environment utilized at the moment (in this
commit) is that of the root node (which is the global scope), in both
indexing and lookup. Future commits will extend this, and contain more
information about and rationale for the implementation.
The new general index methods are restricted to `pub(super)` until an
abstraction can be put in place that is responsible for environment
indexing; that's a responsibility that is currently handled by
`AirAggregateCtx` for tamec, and the linker has no scoping
requirements since all of that has already been dealt with.
DEV-13708
This reverts commit 1b7eac337cd5909c01ede3a5b3fba577898d5961.
This is a revert of the previous revert, just so that I (and you) have
references to prior rationale.
This was previously reverted because it wasn't worth doing, but now we have
a situation where we need to begin implementing lexical scoping rules for
nested containers (packages and templates). In particular, as you'll see in
the commits that follow, we need to be able to look up an identifier that
may have been created as Missing at one level of scope (certain types of
blocks), but then define it at another level.
Or, even more simply at this point, since I'm not yet doing anything
sophisticated with scope: we're only indexing in the global environment, and
we need to be able to index elsewhere too.
The next commit will go into more information, but suffice it to say for now
that indexing is going to get more complicated than a SymbolId.
Sticking with FxHash for now; we don't need a stable hash now.
DEV-13708
There are no such invalid expansion contexts yet, but this gets rid of the
final remaining TODO from introducing the stack. With the existing feature
set, at least.
DEV-13708
This eliminates the TODOs that existed when looking for an OI for rooting an
identifier.
The change to `rooting_ci` is ridiculous, but I want to get other things
done before I jump down the rabbit hole of generalizing that (indexing local
identifiers). Though I have an approach in mind.
DEV-13708
Just some continued cleanup.
Unfortunately, we have sacrificed knowing a package OI must exist
statically, even though one will always be available.
DEV-13708
This has AirAggregate preempt Expr parsing in the same way as templates,
rather than having `AirTplAggregate` concern itself with expression
tokens. This continues to simplify `AirTplAggregate`, which was getting
quite complex not too long ago.
A pattern is now emerging for the call/ret convention for preemption. That
was intentional, but it's nice to see it manifest so obviously before I
abstract it away.
DEV-13708
This was extracted from xir::parse::ele in previous commits. The
conventions help to ensure that pushing and returns are being performed
correctly. The abstraction will continue to evolve.
This ends up using `Ready` as the dead state. I need to determine if this
is ideal, and if so, maybe just use `Default`, otherwise yield an error.
DEV-13708
The use of ArrayVec doesn't buy us anything anymore. There is no difference
in performance through my own benchmarking (at least on our systems), and
the game has changed since this was written: the size of the states is much
smaller since we're no longer aggregating attributes. Further, the use of
ArrayVec during development was also to keep memory allocation away from
various parts of the code, which simplified analysis of the binary that was
produced. Maybe it also reduced memory contention, but clearly that has no
observable impact.
The use of `Vec` removes the arbitrary bound, though I still kept one around
just in case something goes wrong, so TAMER will terminate. Even though the
token stream is bounded in size, lookahead does create recursion, and the
system cannot (as written) prove that it doesn't.
This is preparing for extracting `StateStack` into `parse` for use with
`AirAggregate`.
DEV-13708
`AirAggregate` now handles all delegation to `AirExprAggregate`. This is
possible because `AirAggregate` is now the superstate for each of these
parsers, so `AirTplAggregate` is able to transition to a state that is not
its own.
This does not go so far as reaching the ultimate objective---having nested
template support---even though it'd be fairly simple to do now; there's
going to be a number of interesting consequences to these changes, and a bit
of cleanup is still needed, and I want tests observing this functionality to
accompany those changes. That is: let's keep this a refactoring, to the
extent that it's possible.
Things are getting much easier to understand now, and much cleaner.
DEV-13708
What hell have I gotten myself into.
In the end, this wasn't too bad, but the initial batch of errors was really
demotivating; the diff does this no justice. `Lookahead::into_super` was
created to help tame those errors.
...now I can move forward. Imagine my disappointment when I ran into this
when expecting from previous work that superstates would now work properly
for the AirAggregate parsers.
(The reason this was needed is because AirAggregate splits tokens into
subtypes for child parsers.)
DEV-13708
Oh, boy, I had forgotten about this, until I started working on some
SuperState stuff and discovered this again due to a compiler error. Don't
want to fix something that isn't used.
But this does not bring back great memories. It's unfortunate that it
didn't work out; I'm pretty sure this was part of ~1mo of wasted effort
going down a path that I ultimately had to abort. Not good times. I'm
still behind from it.
DEV-13708
I love deleting code I just wrote...
This doesn't solve the underlying problems with identifiers, but it does at
least lift it into the `AirAggregateCtx`, allowing `AirExprAggregate` to be
even further simplified. Now the `From` implementation is not specialized
and we can readily convert to a SuperState.
There's still a lot of TODOs here, though. And some of them will
unfortunately require runtime checks where there was previously a
compile-time check. But that's okay in a lot of the cases, because the
empty behavior will replace existing error checks.
DEV-13708
Whether or not dangling expressions are permitted is now based solely off of
the stack context, which is also much more intuitive.
`RootStrategy` now only does one thing, and the existing comments describe
why it exists despite that one thing seeming very similar.
`RootStrategy` further alludes to how `ExprStack` could also be
eliminated, should it be worth doing so. It is a tad redundant now with the
new stack.
DEV-13708
This does the same thing to `AirExprAggregate` that was previously done for
`AirAggregate`, taking all parent context from the stack.
This results in a fairly significant simplification of the code, which is
nice, and it makes the `RootStrategy` obviously obsolete in the dangling
case, which will result in more refactoring to simplify it even more.
I regret not taking this route to begin with, but not only was I hoping I
wouldn't need to, but I was still deriving the graph structure and wasn't
sure how this would eventually turn out. These commits serve as a proof of
necessity. Or, at least, concrete rationale.
It's worth noting that this also introduces `From` implementations for
`AirAggregate` and the child parsers, and then uses _that_ to push context
from the `AirTplAggregate` parser. This means that we're just about ready
for it to serve as a superstate. But there is still a specialization of
`AirExprAggregate` in that `From` impl, which must be removed.
DEV-13708
This is more of the same of the previous commit, but in a more digestable
chunk. We now have child states that are able to be constructed using a
simple `From`, which is important to making `AirAggregate` a `SuperState`.
This also makes `AirStack` act like a prototype chain for `ObjectIndex`es,
creating environments where context shadows. The linear search should only
have to check the last two frames (e.g. an Expr has a parent Pkg or Tpl
context which will have a `rooting_oi` value), and this is only done during
a rooting operation.
DEV-13708
This begins to introduce `AirStack` and starts to migrate context away from
the individual `ParseState`s onto the stack.
I should have started to commit earlier; this is getting a bit large and
makes it hard to follow what I'm doing so, hopefully stopping a little bit
short will allow the following commit to show that.
This is a work-in-progress change. All tests pass, but the refactoring is
incomplete. The `AirStack` abstraction is _also_ incomplete and will have
better, more domain-specific operations that make it harder to mess up
pairing pushes with pops.
The purpose of doing this is to allow `AirAggregate` to serve exclusively as
a sum state, which can then become a SuperState, much like `ele_parse!`'s
approach.
The _end_ goal of all of this is arbitrary template nesting.
DEV-13708
The graph's ontology is defined in the direction of the edge: from OA
to OB. This is enforced by the type system to ensure that no code path is
able to generate an invalid graph.
But that also makes it very difficult to work with a generic source to a
specific target.
This introduces a `ObjectIndexRelTo` trait that says whether `Self` is able
to be related to some `ObjectKind` `OB`, implements it for `ObjectIndex
where ObjectRelTo<OB>`, and introduces a new semi-opaque type
`ObjectIndexTo` that allows for the source `ObjectIndex` to be generic.
This then redefines some existing graph primitives in terms of
`ObjectIndexRelTo`, in particular creating edges, so that `ObjectIndex` can
be used as today, and the new `ObjectIndexTo` can be used in the same way
with the same API, without violating the graph ontology.
This will be used by `AirAggregate` to create dynamic targets for rooting
and splicing/expansion.
DEV-13708
To simplify things in support of upcoming changes, we'll just instantiate a
new one as needed. This doesn't have an appreciable performance impact, so
the optimization is premature. It was done just because it was more of the
same that TAMER was already doing, but now it's making things more
difficult.
DEV-13708
Future changes to `AirAggregate` are going to require additional context (a
stack, specifically), but the `Context` is currently utilized
by `Asg`. This introduces a layer of abstraction that will allow us to add
the stack.
Alongside these changes, `ParseState` has been augmented with a `PubContext`
type that is utilized on public APIs, both maintaining BC with existing code
and keeping these implementation details encapsulated.
This does make a bit of a mess of the internal implementation, though, with
`asg_mut()` sprinkled about, so maybe the next commit can clean that up a
bit. EDIT: After adding `AsMut` to a bunch of asg::graph::object::*
methods, I decided against it, because it messes with the inferred
ownership, requiring explicit borrows via `as_mut()` where they were not
required before. I think the existing code is easier to reason about than
what would otherwise result from having `mut asg: impl AsMut<Asg>`
everwhere.
DEV-13708
Previously, `AirTplAggregate` worked only in a `Pkg` context, being able to
root `Tpl` `Ident`s in `Pkg` and expand only into `Pkg`. This still does
the same, but generalizes to allow for different roots and expansion
targets.
This will be utilized to parse nested templates.
DEV-13708
I'm happy with how this ended up turning out---I was able to accomplish this
without having to introduce any additional state to the parser (I _removed_
a state, actually) by tweaking NIR a bit in a previous commit.
We can't update the system test yet, though, because nested templates are
not yet supported by asg::air::tpl; that'll come next. If you try, you'll
be greeted with this error presently (which is worth showing since you'll
never see it unless you're hacking TAMER):
,=====[ ./tests/xmli/template/ logs ]======
|
| thread 'main' panicked at 'not yet implemented: internal error:
| note: nested tpl open
| --> ./tests/xmli/template/src.xml:129:5
| |
| 129 | <t:inner-short />
| | -------------- note: for this template
|
|
| !!! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ !!!
| !!! THIS IS AN UNFINISHED FEATURE IN TAMER !!!
| !!! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ !!!
| !!! This message means that TAMER has encountered an !!!
| !!! unrecoverable error that forced it to terminate !!!
| !!! processing. !!!
| !!! !!!
| !!! TAMER has attempted to provide you with contextual !!!
| !!! information above that might allow you to work around !!!
| !!! this problem until it can be fixed. !!!
| !!! !!!
| !!! Please report this error, including the above !!!
| !!! diagnostic output beginning with 'internal error:'. !!!
| !!! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ !!!
| ', src/asg/air/tpl.rs:207:55
| note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
| Command exited with non-zero status 101
| 0/165fault 0/8io 3528rss 14/2ctx
| /home/[...]/tame/tamer/target/debug/tamec -o ./tests/xmli/template/out.xmli --emit xmlo ./tests/xmli/template/src.xml
|
`====[ end ./tests/xmli/template/ logs ]====
DEV-13708
This is a long-overdue change to make this easier to read, but I'm _still_
holding off on refactoring, since there's still a lot of room for different
patterns to form with all of NIR that is left.
DEV-13708
This adds explicit variants for shorthand template application. This is
less cryptic, and we'll be able to check for the close directly during
desugaring.
DEV-13708
This represents a significant departure from how the XSLT-based TAME handles
the `@values@` param, but it will end up having the same effect. It builds
upon prior work, utilizing the fact that referencing a template in TAMER
will expand it.
The problem is this: allowing trees in `Meta` would add yet another
container; we have `Pkg` and `Tpl` already. This was the same problem with
template application---I didn't want to add support for binding arguments
separately, and so re-used templates themselves, reaching the generalization
I just mentioned above.
`Meta` is intended to be a lexical metasyntatic variable. That keeps its
implementation quite simple. But if we start allowing trees, that gets
rather complicated really quickly, and starts to require much more complex
AIR parser state.
But we can accomplish the same behavior by desugaring into an existing
container---a template---and placing the body within it. Then, in the
future, we'll parse `param-copy` into a simple `Air::RefIdent`, which will
expand the closed template and produce the same result as it does today in
the XSLT-based system.
This leaves open issues of closure (variable binding) in complex scenarios,
such as in templates that introduce metavariables to be utilized by the
body. That's never a practice I liked, but we'll see how things evolve.
Further, this does not yet handle nested template applications.
But this saved me a ton of work. Desugaring is much simpler.
The question is going to be how the XSLT-based compiler responds to this for
large packages with thousands of template applications. I'll have to see
if it's worth the hit at that time, or if we should inline it when
generating the `xmli` file, producing the same `@values@` as
before. But as it stands at this moment, the output is _not_ compatible
with the current compiler, as it expects `@values@` to be a tree, so a
modification would have to be made there.
DEV-13708
This applies to template application only; there's still some work to do for
template parameters in definitions (well, for deriving them in `xmli` at
least). And, as you can see, there's still a lot of TODO items here.
I ended up backtracking on tree edges to Meta, and even on cross edges to
Meta, because it complicated xmli derivation with no benefit right now;
maybe a cross edge will be re-added in the future, but I need to move on and
see where this takes me.
But, it works.
DEV-13708
I'm not happy with this implementation. The linear search is undesirable,
but not too bad (and maybe wouldn't even be worth caching, if this were the
whole story), but we _also_ need to prevent duplicate identifiers. We are
not going to want to perform a linear search of a linked list (effectively)
every time we add an identifier to check for uniqueness, so I think the
caching is going to have to be generalized very shortly anyway.
As it stands now, a duplicate identifier would cause an error at expansion
time. That's not what we want, but it's not terrible, because you can have
that same problem in normal circumstances without local conflicts.
But this'll be used for metavariables as well, where we absolutely _do_ want
to fail at template definition time.
DEV-13708
Identifier lookups, as done using the graph methods today, look up from a
cache representing the global environment.
Templates must not contribute to this environment until expansion. Further,
metavariables will not be present in this environment. To avoid confusion
and help obviate accidental contributions to this environment, the methods
have been renamed. This will also allow for the creation of more general
methods down the line.
DEV-13708
This makes the tests quite a bit easier to understand visually. I've been
doing this with all new tests but had to go back to some old ones, and still
have more to go back to. Baby steps.
DEV-13708
I had intended for this to be a full vertical slice initially, but AIR's
parser is going to need enough work that it'll muddy this patch a bit too
much.
This keeps the desugaring simple, which is what I was hoping for.
The next step is to load it into the graph and emit regenerated longhand
sources.
I also don't like how the namespace prefix is just being ignored for
shorthand param desugaring. This is also the case in the XSLT-based
compiler, but this violates TAMER's principle that it should parse every bit
of information; nothing should be ignored. If something does not contribute
useful information, then it is not a useful construct and ought to be
rejected.
DEV-13708
This moves translation from NirToAir into TplShortDesugar, and changes the
output from AIR to NIR.
This is going to be much easier to reason about as a desugaring
operation (and indeed that's always how TAME has implemented it, in XSLT);
this keeps the complexity isolated.
Ideally, NirToAir wouldn't even accept tokens that it can't handle, but
that's going to take quite a bit more work and I don't have the time right
now. Instead, we'll fail at runtime with some hopefully-useful
information. It shouldn't actually happen in practice.
DEV-13708
This makes it more visually apparent, when looking directly at a node,
whether an edge could represent a tree edge.
Dynamic edges could be tree edges, so I left those solid; that's the more
important visual indicator that I'm interested in, and it's disambiguated by
the dashed line.
DEV-13708
Previous to this commit, ontological cross edges were declared
statically. But this doesn't fare well with the decided implementation for
template application.
The documentation details it, but we have Tpl->Ident which could mean "I
define this Ident once expanded", or it could mean "this is a reference to a
template I will be applying". The former is a tree edge, the latter is a
cross edge, and that determination can only be made by inspecting edge data
at runtime.
It could have been resolved by introducing new Object types, but that is a
lot of work for little benefit, especially given that only (right now) the
visitor uses this information.
DEV-13708
This this a big change that's difficult to break up, and I don't have the
energy after it.
This introduces nullary template application, short- and long-form. Note
that a body of the short form is a `@values@` argument, so that's not
supported yet.
This continues to formalize the idea of what "template application" and
"template expansion" mean in TAMER. It makes a separate `TplApply`
unnecessary, because now application is simply a reference to a
template. Expansion and application are one and the same: when a template
expands, it'll re-bind metavariables to the parent context. So in a
template context, this amounts to application.
But applying a closed template will have nothing to bind, and so is
equivalent to expansion. And since `Meta` objects are not valid outside of
a `Tpl` context, applying a non-closed template outside of another template
will be invalid.
So we get all of this with a single primitive (getting the "value" of a
template).
The expansion is conceptually like `,@` in Lisp, where we're splicing trees.
It's a mess in some spots, but I want to get this committed before I do a
little bit of cleanup.
This was missing `@FEATURES@`, which was causing more compilation than
necessary, but also causing clippy to evaluate different code.
This also adds RUSTFLAGS, for the same reason of not wanting to recompile.
DEV-13708
This chooses Option B, as stated would likely be the case in the previous
commit. The reasons are practical---I intend to support partial application
if doing so is worth it, either in implementation of the compiler or the
source language.
Closed templates can be referenced using `IdentRef` to trigger
expansion---their value is what they expand into, and they are spliced into
that point in the tree, like `,@` in Lisp. We are able to overload this
behavior because we have the necessary type information.
However, I don't want to have to generate an Ident for every single template
expansion; there are many tens of thousands of them in our production
system. Since AIR doesn't presently have a way to deal with this situation,
I'll for now add a special token that will close and expand a template in
place; it can be replaced with two separate tokens (`TplEnd` + `Ref`, for
example) in the future if such a need arises.
Are we there yet...?
DEV-13708
Also known as metavariables or template parameters.
This is a bit of a tortured excursion, trying to figure out how I want to
best represent this. I have a number of pages of hand-written notes that
I'd like to distill over time, but the rendered graph ontology (via
`asg-ontviz`) demonstrates the broad idea.
`AirTpl::TplApply` highlights some remaining questions. What I had _wanted_
to do is to separate the concepts of application and expansion, and support
partial application and such. But it's going to be too much work for now,
when it isn't needed---partial application can be worked around by simply
creating new templates and duplicating params, as we do today, although that
sucks and is a maintenance issue. But I'd rather address that head-on in
the future.
So it's looking like Option B is going to be the approach for now, with
templates being closed (as in, no free metavariables) and expanded at the
same time. This simplifies the parser and error conditions significantly
and makes it easier to utilize anonymous templates, since it'll still be the
active context.
My intent is to get at least the graph construction sorted out---not the
actual expansion and binding yet---enough that I can use templates to
represent parts of NIR that do not have proper graph representations or
desugaring yet, so that I can spit them back out again in the `xmli` file
and incrementally handle them. That was an option I had considered some
months ago, but didn't want to entertain it at the time because I wasn't
sure what doing so would look like; while it was an attractive approach
since it pushes existing primitives into the template system (something I've
wanted to do for years), I didn't want to potentially tank performance or
compromise the design for it after I had spent so much effort on all of this
so far.
But my efforts have yielded a system that significantly exceeds my initial
performance expectations, with a decent abstractions, and so this seems
viable.
DEV-13708
See the Air docblock for more information. I'm introducing new tokens for
the template system, which uses the terms "free" and "closed". I prefer
open/close for delimiters, as I've expressed elsewhere, but unfortunately it
conflicts too much (and too confusingly) with other standard terminology as
we get more into the formal side of the language.
DEV-13708
This removes special cases, but it does complicate the parent `AirAggregate`
parser. A pattern of delegation is forming, though abstracting it may be an
interesting challenge, given Rust's limitation on macro invocations as match
arms. But, I think I can manage by generating the entire match using a
macro with a match-compatible syntax, augmenting where
needed...maybe. This'll be messy.
...but if I can write the nightmare that is `ele_parse!`, I'm sure I can
manage this. I just prefer to avoid complex macros unless I really need
them.
DEV-13708
Now that these are actually intended to be used as part of the build, this
is a more appropriate location. I originally wrote it as a manual tool.
DEV-13708
This parses the declarative `object_rel!` definitions from the Rust sources
and produces a DOT representation of the ontology of the graph, which can
then be rendered using Graphviz.
This does not yet introduce it into the build; it ought to be run as part of
`make check` (without rendering with Graphviz) to ensure that we catch
breaking changes, and `make html` ought to integrate it into the
documentation, perhaps as part of `asg::graph` or `asg::graph::object`.
DEV-13708
Small break from templates for something easier. I have COVID-19, so I'll
use that as my excuse for wanting to be more lazy.
The real reason is to see some more concrete progress and ensure that
patterns hold for simple expressions before further refactoring.
But, before I proceed with such refactoring, I really ought to approach
something that requires a NIR desugaring step, like case statements.
DEV-13708
Going higher than that doesn't make sense because we're in shell and
invoking commands all around this, so even milliseconds isn't going to be
entirely accurate here. However, what I am more interested in is observing
time relative to other runs; this isn't intended for profiling, but for
eyeballing unexpected behavior.
DEV-13708
There's a lot to look at, especially in the event of failure. Further, I
wanted to add additional statistics that could be eyeballed.
Right now, tamec is too fast (at least on my machine) for the precision of
/usr/bin/time: we need milliseconds, but we only get hundredths of a
second. So it'll all show as 0:00.00s. Which is okay, for now; it just
shouldn't exceed that. ;)
DEV-13708
The intent was to have a very simple implementation of `hold_dangling` and
have everything work. But, I had a nasty surprise when the system tests
caught bug caused by some interesting depth interactions as it relates to
`xmli` and auto-closing.
I added an extra test/example in `asg::graph::visit::test` to illustrate the
situation; it was difficult to derive from the traces, but trivially obvious
once I wrote it out as an example.
With that, templates can now aggregate tokens for dangling expressions.
DEV-13708
This won't try the fixpoint test if the prior one fails, which will always
cause that one to fail. And it further won't attempt the diff on
compilation failure.
DEV-13708
And finally we have tokens aggregated onto the ASG in the context of a
template. I expected to arrive here much more quickly, but there was a lot
of necessary refactoring. There's a lot more that could be done, but I need
to continue; I had wanted this done a week ago.
It is worth noting, though, that this finally achieves something I had been
wondering about since the inception of this project---how I'd represent
templates on the graph. I think this worked out rather nicely. It wasn't
even until a few months ago that I decided to use AIR instead of NIR for
that purpose (NIR wouldn't have worked).
And note how I didn't have to touch the program derivation at all---the
system test just works with the AIR change, because of the consistent
construction of the graph. Beautiful.
DEV-13708
This hoists the errors back into `AirAggregate`; I need dead states for the
`AirTplAggregate` parser so that it will know when to (and not to) interpret
tokens in the context of the template itself.
In a previous commit message, I had pondered whether it may be possible to
eliminate the dead state transition, and yet here I've used it with both of
the sub-parsers now. So it seems like the better option in the future may
be to narrow the type further---to say precisely _what_ types of tokens may
yield a dead state transition; otherwise you lose the match information from
the parser that yielded it.
A stubbornly persistent problem in Rust, this magical and hidden match
knowledge.
DEV-13708
This sets us up to be able to determine how `Dangling` expressions will be
rooted into templates.
This new strategy isn't yet handling `Dangling`; I wanted to get this
committed first so that the `Dangling` refactoring is more clear.
DEV-13708
Expressions were previously tied to packages. This prepares for using a
`Tpl` as a container for expressions.
This does not yet handle the situation of auto-rooting dangling expressions
within the container.
DEV-13708
This result in less useful debug output, but it'll be needed for using
a (possibly-anonymous) template as evidence.
This evidence is simply for debugging, and to require some sort of value
during development to help obviate when maybe something is being done
incorrectly (if no obvious value exists).
DEV-13708
This is more of the same refactoring that has been happening. This
extraction also helps emphasize the relationship between imported objects,
and isolates the growing number of test cases. This parser will only grow.
DEV-13708
Just as was done with the expression parser, which this will utilize. This
initializes it, but doesn't yet make use of it (`AirExprAggregate`).
Refactoring was definitely needed; decomposing this is quite a bit of work,
in no small part because of the complexity. This helps significantly.
DEV-13708
This works around limitations of Rust's borrow checker as of the time of
writing. See the provided documentation for more information.
The branch context is not yet exposed to the `delegate` family of methods;
it will be added only as needed in the future.
DEV-13708
This delegates expression parsing to `AirExprAggregate`, in an effort to
both begin to simplify the understanding and maintenance of `AirAggregate`;
and allow for parser composition for template parsing.
This utilizes the prior changes for token sum types to precisely define the
subset of AIR tokens supported by the expression parser. This differs from
prior approaches which delegated until a dead state, relying on runtime
information to determine if a parser has finished. This allows us to
determine that statically.
I do want to be able to eliminate the dead state from the parser so we can
get rid of the `unreachable!`, but I need to move on; that's something I had
tried to do in the past too, which ended up adding a bit of complexity, and
I'll have to consider my options in the future, including whether the dead
state transition can be entirely eliminated in favor of the combination of
these sum types and recovery; the parsing framework decisions were made
while recovery was still an open question, at least in practice.
DEV-13708
This was a rather frustrating thing to encounter. I was working on
refactoring `AirAggregate`, and found that my tests were hanging despite no
apparent cause in the parser itself.
As it turns out, rather than failing with a `FinalizeError` as I
expected (since I was mid-refactor), `collect()` was allocating space for an
endless stream of errors. This was easily verified by adding a `take(x)`
and observing the assertion failure (in this case, in `close_pkg_mid_expr`).
This happens to be the first time in a long time that I actually had to
debug---the combination of robust types as proofs and tests to fill in the
gaps means that runtime issues are caught at build time in all but
exceptional cases (like this one).
It's also worth noting that, because of my policy of iterating only at the
higher levels of the program, it was clear that this must somehow be
Parser-related, since that's the only part of the system that has the
potential for unbounded recursion due to its cyclic state machines.
DEV-13708
This introduces a new macro `sum_ir!` to help with a long-standing problem
of not being able to easily narrow types in Rust without a whole lot of
boilerplate. This patch includes a bit of documentation, so see that for
more information.
This was not a welcome change---I jumped down this rabbit hole trying to
decompose `AirAggregate` so that I can share portions of parsing with the
current parser and a template parser. I can now proceed with that.
This is not the only implementation that I had tried. I previously inverted
the approach, as I've been doing manually for some time: manually create
types to hold the sets of variants, and then create a sum type to hold those
types. That works, but it resulted in a mess for systems that have to use
the IR, since now you have two enums to contend with. I didn't find that to
be appropriate, because we shouldn't complicate the external API for
implementation details.
The enum for IRs is supposed to be like a bytecode---a list of operations
that can be performed with the IR. They can be grouped if it makes sense
for a public API, but in my case, I only wanted subsets for the sake of
delegating responsibilities to smaller subsystems, while retaining the
context that `match` provides via its exhaustiveness checking but does not
expose as something concrete (which is deeply frustrating!).
Anyway, here we are; this'll be refined over time, hopefully, and
portions of it can be generalized for removing boilerplate from other IRs.
Another thing to note is that this syntax is really a compromise---I had to
move on, and I was spending too much time trying to get creative with
`macro_rules!`. It isn't the best, and it doesn't seem very Rust-like in
some places and is therefore not necessarily all that intuitive. This can
be refined further in the future. But the end result, all things
considered, isn't too bad.
DEV-13708
This sets the stage for template parsing, and finally decides how we're
going to represent templates on the ASG. This is going to start simple,
since my original plans for improving how templates are
handled (conceptually) is going to have to wait.
This is the last difficult object type to figure out, with respect to graph
representation and derivation, so I wanted to get it out of the way.
DEV-13708
I wasn't initially sure whether I'd want separate tokens for different types
of identifying operations, but now that I see that it is clear from the
current state of the parser, there's no need.
This matches the name of the token in NIR.
DEV-13708
The previous commit demonstrated the amount of boilerplate necessary for
introducing new `ObjectKind`s; this abstracts away a lot of that
boilerplate, and allows for declarative relationship definition for the
ASG's ontology.
DEV-13708
There's quite a bit of boilerplate here that'll eventually need factoring
out. But it's also clear that it is somewhat onerous to add new object
types.
Note that a good chunk of this burden is _intentional_, via exhaustiveness
checks---adding a new type of object is an exceptional occurrence (well, in
principle, but we haven't added them all yet, so it'll be more common
initially), and we'd rather be safe to ensure that everything is properly
considering how that new type of object interacts with it.
Let's not confuse coupling with safety---the latter causes a burden because
of the former, not because of itself; it provides a service to us.
But, nonetheless, we'll want to reduce this burden somewhat since there are
a number more to add.
DEV-13708
Just as `rate` is a `sum`, `classify` is an `all` by default. The `@any`
attribute will change that interpretation, though I only intend to recognize
that in parsing later on, not emit that in XMLI.
DEV-13708
Let's start to be explicit about what's missing as we continue to add new
tokens; the exhaustiveness checks throughout the system will guide the
changes that need to be made.
DEV-13708
The element only, no attributes yet.
I'll keep forming boilerplate until abstraction points become obvious with
more variety; this is still pretty close to what was already supported.
DEV-13708
We already had `TreeContext`, and I'm passing the same arguments around, so
this uses it to lift arguments out of these functions, like partial
application.
DEV-13708
This tidies this method up into a decent state that I'm fairly content
with. This goes to emphasize my dislike of returns, which muddies control
flow and makes the code more difficult to read at a glance, which increase
the likelihood of logic bugs.
`match` statements in tail position, on the other hand, are very clear, and
less cognitively burdensome since you can see each individual code path at a
glance.
DEV-13708
This begins to develop a pattern for doing these transformations. I had
tried a number of things using iterators, but I wasn't satisfied with either
how they were turning out; had to fight too much with the type system; or
had to resort to heap allocations. Sticking with an explicit
`push`/`push_all` for now works just fine.
Almost done cleaning up `AsgTreeToXirf::parse_token`, and then I can move on
to introducing more objects.
DEV-13708
This is generic over the source, just as the target, defaulting just the
same to `ObjectIndex`.
This allows us to use only the edge information provided rather than having
to perform another lookup on the graph and then assert that we found the
correct edge. In this case, we're dealing with an `Ident->Expr` edge, of
which there is only one, but in other cases, there may be many such edges,
and it wouldn't be possible to know _which_ was referred to without also
keeping context of the previous edge in the walk.
So, in addition to avoiding more indirection and being more immune to logic
bugs, this also allows us to avoid states in `AsgTreeToXirf` for the purpose
of tracking previous edges in the current path. And it means that the tree
walk can seed further traversals in conjunction with it, if that is so
needed for deriving sources.
More cleanup will be needed, but this does well to set us up for moving
forward; I was too uncomfortable with having to do the separate
lookup. This is also a more intuitive API.
But it does have the awkward effect that now I don't need the pair---I just
need the `Object`---but I'm not going to remove it because I suspect I may
need it in the future. We'll see.
The TODO references the fact that I'm using a convenient `resolve_oi_pairs`
instead of resolving only the target first and then the source only in the
code path that needs it. I'll want to verify that Rust will properly
optimize to avoid the source resolution in branches that do not need it.
DEV-13708
This makes the inner `Object` type generic (but defaulting to the same inner
types as before) so that it can be used as a sum type for various types
where `ObjectKind`-based narrowing is required.
In this case, it's used to narrow `ObjectIndex` alongside the inner
`ObjectKind` so that the two are definitely in sync. This not only results
in cleaner code and a more intuitive API that's approachable to people
less familiar with the system, but it also helps to eliminate logic bugs
that might result form manually narrowing (as was done before this change).
DEV-13708
This was a fairly simple addition, since rate blocks already lower into sum
expressions; these are just non-identified.
This does emphasize that the nir::parse `ele_parse!` abstraction I spent so
much time on ended up not being a perfect fit, as it now has some
boilerplate after it was stripped of much of its capabilities some time ago.
Don't worry, `nir::air` and `asg::graph::xmli` will get cleaned up.
DEV-13708
This extends the POC a bit by beginning to reconstruct rate blocks (note
that NIR isn't producing sub-expressions yet).
Importantly, this also adds the first system tests, now that we have an
end-to-end system. This not only gives me confidence that the system is
producing the expected output, but serves as a compromise: writing unit or
integration tests for this program derivation would be a great deal of work,
and wouldn't even catch the bugs I'm worried most about; the lowering
operation can be written in such a way as to give me high confidence in its
correctness without those more granular tests, or in conjunction with unit
or integration tests for a smaller portion.
DEV-13708
Mike Gerwitz