A new AirAggregate parser is utilized for each package import. This
prevents us from moving the index from `Asg` onto `AirAggregateCtx` because
the index would be dropped between each import.
This allows re-using that context and solves for problems that result from
attempting to do so, as explained in the new
`resume_previous_parsing_context` test case.
But, it's now clear that there's a missing abstraction, and that reasoning
about this problem at the topmost level of the compiler/linker in terms of
internal parsing details like "context" is not appropriate. What we're
doing is suspending parsing and resuming it later on for another package,
aggregating into the same destination (ASG + index). An abstraction ought
to be formed in terms of that.
DEV-13162
This was the remaining of my stashed changes that I had mentioned in a
previous commit, but is accomplished differently than I had prototyped. My
initial approach was a bit too klugey: to accept as an argument in various
scope contexts the active parser, as if it were the top stack frame. This
was prototyped before the `AirPkgAggregate` parser was even created.
So we've since created a Pkg parser and now an opaque parser for opaque
idents. There may be other opaque objects in the future.
Because of this change, the parent `AirPkgAggregate` gets stored on the
stack and just naturally becomes part of the lexical scope determination,
and so everything Just Works!
This commit was _supposed_ to be moving the index from `Asg` onto
`AirAggregateCtx`, but I wasn't able to do that because that context is
re-created for each package import currently.
DEV-13162
As evidenced by this change, the tuple syntax was no longer serving us
well. But the real reason for this change is to prepare for the addition of
a fourth field: the index, taken from `Asg`.
DEV-13162
This change means that `asg::air` is now the only module that directly
invokes index-related methods on `Asg`. This clears the way, finally, to
removing the index from `Asg` entirely.
Not only does this result in a less awkward architecture, it also ensures
that lookups are forced to go through the system that understands and
controls lexical scoping, which will be able to give the correct answer.
Of course, the caveat is that the "correct" answer depends on what's
currently on the stack, depending on what type of lookup is being performed,
but those details are still encapsulated within the `asg::air` module and
its tests.
DEV-13162
This is the culmination of a great deal of work over the past few
weeks. Indeed, this change has been prototyped a number of different ways
and has lived in a stash of mine, in one form or another, for a few weeks.
This is not done just yet---I have to finish moving the index out of Asg,
and then clean up a little bit more---but this is a significant
simplification of the system. It was very difficult to reason about prior
approaches, and this finally moves toward doing something that I wasn't sure
if I'd be able to do successfully: formalize scope using AirAggregate's
stack and encapsulate indexing as something that is _supplemental_ to the
graph, rather than an integral component of it.
This _does not yet_ index the AirIdent operation on the package itself
because the active state is not part of the stack; that is one of the
remaining changes I still have stashed. It will be needed shortly for
package imports.
This rationale will have to appear in docs, which I intend to write soon,
but: this means that `Asg` contains _resolved_ data and itself has no
concept of scope. The state of the ASG immediately after parsing _can_ be
used to derive what the scope _must_ be (and indeed that's what
`asg::air::test::scope::derive_scopes_from_asg` does), but once we start
performing optimizations, that will no longer be true in all cases.
This means that lexical scope is a property of parsing, which, well, seems
kind of obvious from its name. But the awkwardness was that, if we consider
scope to be purely a parse-time thing---used only to construct the
relationships on the graph and then be discarded---then how do we query for
information on the graph? We'd have to walk the graph in search of an
identifier, which is slow.
But when do we need to do such a thing? For tests, it doesn't matter if
it's a little bit slow, and the graphs aren't all that large. And for
operations like template expansion and optimizations, if they need access to
a particular index, then we'll be sure to generate or provide the
appropriate one. If we need a central database of identifiers for tooling
in the future, we'll create one then. No general-purpose identifier lookup
_is_ actually needed.
And with that, `Asg::lookup_or_missing` is removed. It has been around
since the beginning of the ASG, when the linker was just a prototype, so
it's the end of TAMER's early era as I was trying to discover exactly what I
wanted the ASG to represent.
DEV-13162
This is in the same spirit as previous commits modifying (or removing)
tests and benchmarks related to accessing the ASG and its indexes directly.
With this change, only `asg::air` uses the indexing and lookup methods on
`Asg`. This will allow me to extract the index from `Asg` entirely and have
`Air` solely responsible for lookup; the graph will be responsible only for,
well, being a graph. Indexing is an optimization strategy.
More information in the commit to follow. But notice how this moving
environment-related concerns away from `Asg` and into AIR, and how the
remaining environment concerns are index-related.
But there is one remaining barrier: to fully move the indexing away from
`Asg`, we have to use an alternative (and complete)
abstraction---AirAggregateCtx with its ability to resolve and introduce
scope based on the stack. The `AirIdent` token subset doesn't yet do that,
and all the work up to this point was in prepartion for doing that. Since
introducing indexing at Root a few commits ago, it's now possible to
proceed.
DEV-13162
The previous commit introduced a duplicate `asg_from_toks`; this just makes
it available publicly for any tests that might utilize AIR to lower the
barrier to writing such tests and provide some guidance in doing so.
DEV-13162
This, finally, introduces identifier pooling in the global environment,
represented by `Root`. All package-level identifiers will be scoped as
such, which at the moment means anything that's not within a template.
As mentioned in recent commits, this does require additional cleanup to
finalize, and some more test will make additional rationale more clear.
It's also worth noting the intent of storing the `ObjectIndex<Root>`---not
only does it mean that the active root can be derived solely from the
current parsing state, but it also means that in the future we can
contribute to any, potentially multiple, roots. I had previously used Neo4J
to effectively diff two dependency graphs between versions in the current
XSLT-based TAMER; I'd like to be able to do that with TAMER in the future,
which is an important concept when considering automated data migration, as
well as querying for the effects of changes.
More to come. I'm hoping this is finally nearing a conclusion and I can
finally tie everything together with package imports. `AirIdent` will be
introduced into the mix soon now too, now that this commit is able to root
them.
DEV-13162
Okay, this is finally distilling into something fairly simple and
reasonable, but I'm not quite there yet.
In particular, the responsibility is simply between `Asg` (as the owner of
the index) and `AirAggregateCtx` (as the owner of the stack frames from
which environments and scope are derived). This was inevitable and I was
waiting for it, but now I have a good idea of how to clean it up and
proceed.
This also doesn't index in root yet (`active_rooting_oi` is still `None` for
`Root`), and I think I may remove `Pool` and just make it `Visible` at that
point, since it won't be going any further anyway. I don't think the
distinction is meaningful and will just complicate implementations.
The tests also need some more cleanup---the assertions ideally would live in
independent tests, and the assertion failure is in a function call rather
than the test (function) itself, so requires a Rust backtrace to locate the
line number of (unless you look at the failure data).
So I suppose this is more of a mental synchronization point than
anything. Nothing's broken, though.
DEV-13162
There's a lot of documentation on this in the commit itself, but this stems
from
a) frustration with trying to understand how the system needs to operate
with all of the objects involved; and
b) recognizing that if I'm having difficulty, then others reading the
system later on (including myself) and possibly looking to improve upon
it are going to have a whole lot of trouble.
Identifier scope is something I've been mulling over for years, and more
formally for the past couple of months. This finally begins to formalize
that, out of frustration with package imports. But it will be a weight
lifted off of me as well, with issues of scope always looming.
This demonstrates a declarative means of testing for scope by scanning the
entire graph in tests to determine where an identifier has been
scoped. Since no such scoping has been implemented yet, the tests
demonstrate how they will look, but otherwise just test for current
behavior. There is more existing behavior to check, and further there will
be _references_ to check, as they'll also leave a trail of scope indexing
behind as part of the resolution process.
See the documentation introduced by this commit for more information on
that part of this commit.
Introducing the graph scanning, with the ASG's static assurances, required
more lowering of dynamic types into the static types required by the
API. This was itself a confusing challenge that, while not all that bad in
retrospect, was something that I initially had some trouble with. The
documentation includes clarifying remarks that hopefully make it all
understandable.
DEV-13162
This begins demonstrating that the root will be utilized for identifier
lookup and indexing, as it was originally for TAME and is currently for the
linker.
This was _not_ the original plan---the plan was to have identifiers indexed
only at the package level, at least until we need a global lookup for
something else---but that plan was upended by how externs are currently
handled. So, for now, we need a global scope.
(Externs are resolved by the linker in such a way that _any_ package that
happens to be imported transitively may resolve the import. This is a
global environment, which I had hoped to get rid of, and which will need to
eventually go away (possibly along with externs) to support loading multiple
programs into the graph simultaneously for cross-program analysis.)
This commit renames the base state for `AirAggregate` to emphasize the fact,
especially when observing it in the `AirStack`, and changes
`AirAggregateCtx::lookup_lexical_or_missing` to resolve from the _bottom_ of
the stack upward, rather than reverse, to prove that the system still
operates correctly with this change in place.
The reason for this direction change is to simplify lookup in the most
general case of non-local identifiers, which are almost all of them in
practice---they'll be immediately resolved at the root once they're
indexed. This can be done because I determined that I will _not_ support
shadowing; rationale for that will come later, but TAME is intended to be a
language suitable for non-programmer audiences as well. Note that
identifiers will be resolved lexically within templates in TAMER, unlike
TAME, which means that the expansion context will _not_ be considered when
checking for shadowing, so templates will still be able to compose without a
problem so long as they do not shadow in their definition context. (I'll
have to consider how that affects template-generating templates later on,
but that's an ambiguous construction in TAME today anyway.)
This _does not_ yet index anything at the root where it wasn't already being
indexed explicitly.
DEV-13162
This requires the name as part of the package definition, which in turn
removes a state (and all the combinations resulting from it) from
AirAggregate, which results in significant complexity reduction for a very
complex part of the system.
Pushing this complexity outward results in a reduction of overall
complexity, and obviates the question of where NIR will receive a generated
name.
DEV-13162
This is something I've wanted to do for some time, but the system is
becoming hard enough to reason about (with some attempted future changes)
that I require the consistency afforded by this change.
It's not entirely done---as noted by the TODO for `UnnamedPkg`---but it's
close, and then `AirAggregate` will just be a delegating superstate, like
`ele_parse!`.
Importantly, this also puts a package parser on the stack, which will work
better with the stack-based scoping system being developed. It will also
make it easier to fall back to a base case that I had really wanted to
avoid, and will have more information on in the future: root indexing for a
shared global environment for package-level identifiers. (Imports are still
package-scoped, but only in appearance, by contributing to the global
environment of the compilation unit during import. Well, it doesn't do that
yet. The XSLT compiler works in that way.)
DEV-13162
I had apparently forgotten about this, because I didn't benefit from the
exhaustiveness check; this needs to be eliminated so that this doesn't
happen again, and to provide a proper non-panicking error.
DEV-13162
This reverts commit da7fe96254e425bc7b75f8cf454465b71e27e372.
I'm a fool---this would be pursuant to a future plan that removes AirIdent
opaque tokens. But for now, I need it on IdentDecl and others, which
currently has a `Source` (that I want to go away, as just mentioned), which
contains the same information.
So maybe more to come on this...
DEV-13162
This allows for a canonical package name to be optionally provided to
explicitly resolve a reference against, avoiding a lexical lookup.
This change doesn't actually utilize this new value yet; it just
retains BC. The new argument will be used for the linker, since it already
knows the package that defined an identifier while reading the object file's
symbol table. It will also be used by tamec for the same purposes while
processing package imports.
DEV-13162
-- squashed with --
tamer: asg::air::ir::RefIdent: CanonicalName=SPair
The use of CanonicalName created an asymmetry between RefIdent and
BindIdent. The hope was to move CanonicalName instantiation outside of AIR
and into NIR, but doing so would be confusing and awkward without doing
something with BindIdent.
I don't have the time to deal with that for now, so let's observe how the
system continues to evolve and see whether hoisting it out makes sense in the
end. For now, this works just fine and I need to move on with the actual
goal of finishing package imports so that I can expand templates.
DEV-13162
This change requires every package to have a canonical name, and performs
namespec canonicalization on imports.
Since all package names are canonicalized, this opens the door to being able
to index package names at import, allowing the object to be shared on the
graph and properly reference a package after it has been resolved.
Note that the system tests' canonicalization is relative to the hard-coded
`/TODO` presently; that will change in the near future once `tamec`
generates names from the provided path.
DEV-13162
NOTE: This temporarily breaks `tameld`. It is fixed in a future commit when
names are bound. This was an oversight when breaking apart changes into
separate commits, because the linker does not yet have system tests like
tamec does.
This is preparing for a full transition to requiring a canonical package
name. The previous `Unnamed` variant has been removed and `AirAggregate`
will provide a default `WS_EMPTY` name, as `Pkg` had done before.
The intent of this change is to allow for consulting the index before a
new `Pkg` object is created on the graph, but we're not quite ready for that
yet.
Well, that's not entirely true---the linker can be ready for that. But the
compiler needs to canonicalize import paths relative to the active package
canonical name, which it can't even do yet because tamec isn't generating a
name.
So maybe the linker will be first; it's useful to have that in a separate
commit anyway to emphasize the change.
DEV-13162
This is already a concept in the XSLT-based compiler, where each package has
a `package/@name` generated from its path. The same will happen with tamec.
Before we can load packages into the graph, we need canonical identifiers so
that they can be indexed. The next commit will handle indexing using this
information.
DEV-13162
This modifies the xmlo reader, xmlo->AIR lowering, and AIR->ASG to introduce
a package for identifiers. It does not yet, however, add edges from the
package to the identifier.
Once edges are added, the DFS will change in undesirable ways, which will
require a new implementation. This is desirable to decouple from Petgraph
anyway, and then will be able to restore the prior single-pass sort+cycle
check.
That will also encapsulate visiting behavior within the `asg::graph` module
and, in turn, allow encapsulating `Asg.graph` finally.
DEV-13162
This may now index _any_ type of object, in preparation for indexing package
import paths. In practice, this only makes sense (at least currently) for
`Pkg` and `Ident`.
This generalization also applies to `Asg::lookup_or_missing`.
DEV-13162
Historically, the ASG was better described as a "dependency graph",
containing only identifiers (which are simply called "symbols" in the
XSLT-based compiler). Consequently, it was appropriate for the graph to
have operations specific to identifiers. (Indeed, that's the only type of
object the graph supported.)
Much has changed since then. This cleans things up, and makes parenting
identifiers to root an _explicit_ operation. This will make it easier to
move forward with handling of scope, and importing identifiers into
packages, and removing `Source`, and so on.
DEV-13162
I've been torturing myself trying to figure out how I want to generalize
indexing, lookups, and value numbering in a way that is appropriate for this
project (that is, not over-engineered relative to my needs).
Before I can do much of anything, though, I need to stop having indexing
only as a `Root` thing (previously it wasn't even tied to `Root`). This
makes that change for tamec, but temporarily removes scoping concerns until
I can add more specific types of indexing.
Not only does this allow cleaning up some `Ident`-specific stuff from `Asg`,
but the cleanup also helps to show that portions of the system aren't still
using Root-based globals.
The linker (`tameld`) still uses the old `global` methods for now; those
will eventually go away, but this needs to change to unify both tamec and
tameld once we get to imports as part of the compiler.
DEV-13162
This supports arbitrary documentation as sibling text (mixed content, in XML
terms). The motivation behind this change is to permit existing system
tests to succeed when `Todo | TodoAttr` are both rejected, rather than
having to ignore this.
TAME has always had a philosophy of literate documentation, however it was
never fully realized. This just maintains the status quo; the text is
unstructured, and maybe will be parsed in the future.
Unfortunately, this does _not_ include the output in the `xmli` file or the
system tests. The reason has nothing to do with TAMER---`xmllint` does not
format the output when there is mixed content, it seems, and I need to move
on for now; I'll consider my options in the future. But, it's available on
the graph and ready to go.
DEV-13708
This introduces a new `Doc` object that can be owned by `Expr` (only atm)
and contain what it describes as a concise independent clause. This
construction is not enforced, and is only really obvious today via the
Summary Pages.
There's a lot of latent and unrealized potential in TAME's documentation
philosophy that was never realized, so this will certainly evolve over
time. But for now, the primary purpose was to get `@desc` working on things
like classifications so that `xmli` output can compile for certain
packages.
DEV-13708
This doesn't do the actual hard work yet of resolving and loading a package,
but it does place it on the graph and re-derive it into the xmli output.
DEV-13708
This recognizes template application within expressions. Since expressions
can occur within templates, this can occur arbitrarily deeply.
And with that, we have the core of the template system represented on the
graph. Of course, there are some glaring scoping issues to be resolved, but
those aren't unique to template application.
DEV-13708
I had hoped this would be considerably easier to implement, but there are
some confounding factors.
First of all: this accomplishes the initial task of getting nested template
applications and definitions re-output in the `xmli` file. But to do so
successfully, some assumptions had to be made.
The primary issue is that of scope. The old (XSLT-based) TAME relied on the
output JS to handle lexical scope for it at runtime in most situations. In
the case of the template system, when scoping/shadowing were needed, complex
and buggy XPaths were used to make a best effort. The equivalent here would
be a graph traversal, which is not ideal.
I had begun going down the rabbit hole of formalizing lexical scope for
TAMER with environments, but I want to get this committed and working first;
I've been holding onto this and breaking off changes for some time now.
DEV-13708
This eliminates the TODOs that existed when looking for an OI for rooting an
identifier.
The change to `rooting_ci` is ridiculous, but I want to get other things
done before I jump down the rabbit hole of generalizing that (indexing local
identifiers). Though I have an approach in mind.
DEV-13708
Just some continued cleanup.
Unfortunately, we have sacrificed knowing a package OI must exist
statically, even though one will always be available.
DEV-13708
This has AirAggregate preempt Expr parsing in the same way as templates,
rather than having `AirTplAggregate` concern itself with expression
tokens. This continues to simplify `AirTplAggregate`, which was getting
quite complex not too long ago.
A pattern is now emerging for the call/ret convention for preemption. That
was intentional, but it's nice to see it manifest so obviously before I
abstract it away.
DEV-13708
This was extracted from xir::parse::ele in previous commits. The
conventions help to ensure that pushing and returns are being performed
correctly. The abstraction will continue to evolve.
This ends up using `Ready` as the dead state. I need to determine if this
is ideal, and if so, maybe just use `Default`, otherwise yield an error.
DEV-13708
`AirAggregate` now handles all delegation to `AirExprAggregate`. This is
possible because `AirAggregate` is now the superstate for each of these
parsers, so `AirTplAggregate` is able to transition to a state that is not
its own.
This does not go so far as reaching the ultimate objective---having nested
template support---even though it'd be fairly simple to do now; there's
going to be a number of interesting consequences to these changes, and a bit
of cleanup is still needed, and I want tests observing this functionality to
accompany those changes. That is: let's keep this a refactoring, to the
extent that it's possible.
Things are getting much easier to understand now, and much cleaner.
DEV-13708
I love deleting code I just wrote...
This doesn't solve the underlying problems with identifiers, but it does at
least lift it into the `AirAggregateCtx`, allowing `AirExprAggregate` to be
even further simplified. Now the `From` implementation is not specialized
and we can readily convert to a SuperState.
There's still a lot of TODOs here, though. And some of them will
unfortunately require runtime checks where there was previously a
compile-time check. But that's okay in a lot of the cases, because the
empty behavior will replace existing error checks.
DEV-13708
This does the same thing to `AirExprAggregate` that was previously done for
`AirAggregate`, taking all parent context from the stack.
This results in a fairly significant simplification of the code, which is
nice, and it makes the `RootStrategy` obviously obsolete in the dangling
case, which will result in more refactoring to simplify it even more.
I regret not taking this route to begin with, but not only was I hoping I
wouldn't need to, but I was still deriving the graph structure and wasn't
sure how this would eventually turn out. These commits serve as a proof of
necessity. Or, at least, concrete rationale.
It's worth noting that this also introduces `From` implementations for
`AirAggregate` and the child parsers, and then uses _that_ to push context
from the `AirTplAggregate` parser. This means that we're just about ready
for it to serve as a superstate. But there is still a specialization of
`AirExprAggregate` in that `From` impl, which must be removed.
DEV-13708
This is more of the same of the previous commit, but in a more digestable
chunk. We now have child states that are able to be constructed using a
simple `From`, which is important to making `AirAggregate` a `SuperState`.
This also makes `AirStack` act like a prototype chain for `ObjectIndex`es,
creating environments where context shadows. The linear search should only
have to check the last two frames (e.g. an Expr has a parent Pkg or Tpl
context which will have a `rooting_oi` value), and this is only done during
a rooting operation.
DEV-13708
This begins to introduce `AirStack` and starts to migrate context away from
the individual `ParseState`s onto the stack.
I should have started to commit earlier; this is getting a bit large and
makes it hard to follow what I'm doing so, hopefully stopping a little bit
short will allow the following commit to show that.
This is a work-in-progress change. All tests pass, but the refactoring is
incomplete. The `AirStack` abstraction is _also_ incomplete and will have
better, more domain-specific operations that make it harder to mess up
pairing pushes with pops.
The purpose of doing this is to allow `AirAggregate` to serve exclusively as
a sum state, which can then become a SuperState, much like `ele_parse!`'s
approach.
The _end_ goal of all of this is arbitrary template nesting.
DEV-13708
To simplify things in support of upcoming changes, we'll just instantiate a
new one as needed. This doesn't have an appreciable performance impact, so
the optimization is premature. It was done just because it was more of the
same that TAMER was already doing, but now it's making things more
difficult.
DEV-13708
Future changes to `AirAggregate` are going to require additional context (a
stack, specifically), but the `Context` is currently utilized
by `Asg`. This introduces a layer of abstraction that will allow us to add
the stack.
Alongside these changes, `ParseState` has been augmented with a `PubContext`
type that is utilized on public APIs, both maintaining BC with existing code
and keeping these implementation details encapsulated.
This does make a bit of a mess of the internal implementation, though, with
`asg_mut()` sprinkled about, so maybe the next commit can clean that up a
bit. EDIT: After adding `AsMut` to a bunch of asg::graph::object::*
methods, I decided against it, because it messes with the inferred
ownership, requiring explicit borrows via `as_mut()` where they were not
required before. I think the existing code is easier to reason about than
what would otherwise result from having `mut asg: impl AsMut<Asg>`
everwhere.
DEV-13708
Previously, `AirTplAggregate` worked only in a `Pkg` context, being able to
root `Tpl` `Ident`s in `Pkg` and expand only into `Pkg`. This still does
the same, but generalizes to allow for different roots and expansion
targets.
This will be utilized to parse nested templates.
DEV-13708
Identifier lookups, as done using the graph methods today, look up from a
cache representing the global environment.
Templates must not contribute to this environment until expansion. Further,
metavariables will not be present in this environment. To avoid confusion
and help obviate accidental contributions to this environment, the methods
have been renamed. This will also allow for the creation of more general
methods down the line.
DEV-13708
Also known as metavariables or template parameters.
This is a bit of a tortured excursion, trying to figure out how I want to
best represent this. I have a number of pages of hand-written notes that
I'd like to distill over time, but the rendered graph ontology (via
`asg-ontviz`) demonstrates the broad idea.
`AirTpl::TplApply` highlights some remaining questions. What I had _wanted_
to do is to separate the concepts of application and expansion, and support
partial application and such. But it's going to be too much work for now,
when it isn't needed---partial application can be worked around by simply
creating new templates and duplicating params, as we do today, although that
sucks and is a maintenance issue. But I'd rather address that head-on in
the future.
So it's looking like Option B is going to be the approach for now, with
templates being closed (as in, no free metavariables) and expanded at the
same time. This simplifies the parser and error conditions significantly
and makes it easier to utilize anonymous templates, since it'll still be the
active context.
My intent is to get at least the graph construction sorted out---not the
actual expansion and binding yet---enough that I can use templates to
represent parts of NIR that do not have proper graph representations or
desugaring yet, so that I can spit them back out again in the `xmli` file
and incrementally handle them. That was an option I had considered some
months ago, but didn't want to entertain it at the time because I wasn't
sure what doing so would look like; while it was an attractive approach
since it pushes existing primitives into the template system (something I've
wanted to do for years), I didn't want to potentially tank performance or
compromise the design for it after I had spent so much effort on all of this
so far.
But my efforts have yielded a system that significantly exceeds my initial
performance expectations, with a decent abstractions, and so this seems
viable.
DEV-13708
See the Air docblock for more information. I'm introducing new tokens for
the template system, which uses the terms "free" and "closed". I prefer
open/close for delimiters, as I've expressed elsewhere, but unfortunately it
conflicts too much (and too confusingly) with other standard terminology as
we get more into the formal side of the language.
DEV-13708
This removes special cases, but it does complicate the parent `AirAggregate`
parser. A pattern of delegation is forming, though abstracting it may be an
interesting challenge, given Rust's limitation on macro invocations as match
arms. But, I think I can manage by generating the entire match using a
macro with a match-compatible syntax, augmenting where
needed...maybe. This'll be messy.
...but if I can write the nightmare that is `ele_parse!`, I'm sure I can
manage this. I just prefer to avoid complex macros unless I really need
them.
DEV-13708
And finally we have tokens aggregated onto the ASG in the context of a
template. I expected to arrive here much more quickly, but there was a lot
of necessary refactoring. There's a lot more that could be done, but I need
to continue; I had wanted this done a week ago.
It is worth noting, though, that this finally achieves something I had been
wondering about since the inception of this project---how I'd represent
templates on the graph. I think this worked out rather nicely. It wasn't
even until a few months ago that I decided to use AIR instead of NIR for
that purpose (NIR wouldn't have worked).
And note how I didn't have to touch the program derivation at all---the
system test just works with the AIR change, because of the consistent
construction of the graph. Beautiful.
DEV-13708
This hoists the errors back into `AirAggregate`; I need dead states for the
`AirTplAggregate` parser so that it will know when to (and not to) interpret
tokens in the context of the template itself.
In a previous commit message, I had pondered whether it may be possible to
eliminate the dead state transition, and yet here I've used it with both of
the sub-parsers now. So it seems like the better option in the future may
be to narrow the type further---to say precisely _what_ types of tokens may
yield a dead state transition; otherwise you lose the match information from
the parser that yielded it.
A stubbornly persistent problem in Rust, this magical and hidden match
knowledge.
DEV-13708
Mike Gerwitz