This introduces an order-only prerequisite `bootstrap-if-necessary` for the
generation of `suppliers.mk`. Projects utilizing TAME as a dependency may
include a `bootstrap.mk` that overrides this target to trigger any
bootstrapping scripts that may be necessary due to toolchain updates.
DEV-7145
This was a relic of the old bootstrap system, where bootstrapping was in the
context of a parent project that utilized TAME (and so TAME needed to be
built). But that doesn't make sense in the context of TAME itself, and what
_part_ of TAME should be built should be controlled by the project utilizing
it.
This is especially important now that TAMER builds are getting much longer
with the introduction of NIR and its parser-generator.
DEV-7145
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
This includes when on the last state / expecting a close.
Previously, there were a couple major issues:
1. After parsing an NT, we can't allow preemption because we must emit a
dead state so that we can remove the NT from the stack, otherwise
they'll never close (until the parent does) and that results in
unbounded stack growth for a lot of siblings. Therefore, we cannot
preempt on `Text`, which causes the NT to receive it, emit a dead
state, transition away from the NT, and not accept another NT of the
same type after `Text`.
2. When encountering an unknown element, the error message stated that a
closing tag was expected rather than one of the elements accepted by the
final NT.
For #1, this was solved by allowing the parent to transition back to the NT
if it would have been matched by the previous NT. A future change may
therefore allow us to remove repetition handling entirely and allow the
parent to deal with it (maybe).
For #2, the trouble is with the parser generator macro---we don't have a
good way of knowing the last NT, and the last NT may not even exist if none
was provided. This solution is a compromise, after having tried and failed
at many others; I desperately need to move on, and this results in the
correct behavior and doesn't sacrifice performance. But it can be done
better in the future.
It's also worth noting for #2 that the behavior isn't _entirely_ desirable,
but in practice it is mostly correct. Specifically, if we encounter an
unknown token, we're going to blow through all NTs until the last one, which
will be forced to handle it. After that, we cannot return to a previous NT,
and so we've forefitted the ability to parse anything that came before it.
NIR's grammar is such that sequences are rare and, if present, there's
really only ever two NTs, and so this awkward behavior will rarely cause
practical issues. With that said, it ought to be improved in the future,
but let's wait to see if other parts of the lowering pipeline provide more
appropriate places to handle some of these things (even though it really
ought to be handled at the grammar level).
But I'm well out of time to spend on this. I have to move on.
DEV-7145
This removes the deprecated `@const@` argument in favor of shorthand
`@value@` constants, which were introduced long ago precisely to avoid
having to define separate `@const@` parameters for all of these templates.
DEV-7145
"keep" is an old feature that forced the linker to retain symbols that were
unused. This was removed long ago in favor of having all linker roots
defined by the return map.
This also removes an old `@always`, which seems like a typo for
`when="always"` or something...not entirely sure.
DEV-7145
Accumulators were an ancient TAME feature removed long ago during The Great
Refactoring (...okay, that part didn't fit the definition of a "refactor",
but that's technically what that's referring to).
TAMER will not accept it.
DEV-7145
This has not been in use for years and it's time to go away---it is the only
thing in TAME that causes nondeterminism, at least that I'm immediately
aware of. Perhaps I'll find something else while reimplementing TAME in
TAMER.
_This does not remove the compiler code to produce this._ If something
still needs `__DATE_YEAR__` (because it's really old), it can define this
value itself, and still utilize it until TAMER (which will not include it).
DEV-7145
`ele_parse!` was recently converted to accept zero-or-more for every NT to
simplify the parser-generator, since NIR isn't going to be able to
accurately determine whether child requirements are met anyway (because of
the template system).
This ensures that `Close` can be accepted when we're expecting an
element. It also adds a test for a scenario that's causing me some trouble
in stashed code so that I can ensure that it doesn't break.
DEV-7145
This sets the maximum depth to 64, which is still arbitrary, but
unfortunately the sum types introduce multiple levels of nesting, in
particular for template applications, so nested applications can result in a
fairly large stack.
I have various ideas to improve upon that---limited a bit in that repetition
as it is current implemented inhibits tail calls---but they're not worth
doing just yet relative to other priorities. The impact of this change is
not significant.
DEV-7145
This removes support for configurable repetition.
What? Why?
As it turns out, the complexity that repetition adds is quite significant
and is not worth the effort. The truth is that NIR is going to have to
allow zero-or-more matches on virtually everything _anyway_ because template
application is allowed virtually anywhere---it is not possible to fully
statically analyze TAME's sources because templates can expand into just
about anything. Given that, AIR (or something down the line) is going to
have to supply the necessary invariants instead.
It does suck, though, that this removes a lot of code that I fairly recently
wrote, and spent a decent amount of time on. But it's important to know
when to cut your losses.
Perhaps I could have planned better, but deriving this whole system as been
quite the experiment.
DEV-7145
If attributes fail to parse (e.g. missing required attribute) and parsing
reaches a dead state, this will recover by ignoring the entire element. It
previously panicked with a TODO.
DEV-7145
These were initially used to prevent conflicts with generated variants, but
we are no longer generating such variants since they're being jumped to via
the trampoline.
DEV-7145
I'm starting to clean up some TODOs, and this was a glaring one causing
panics when encountered. The recovery for this is simple, because we have
no choice: just stop parsing; leave it to the next lowering operation(s) to
complain that we didn't provide what was necessary. They'll have to,
anyway, since templates mean that NIR cannot ever have enough information to
guarantee that a document is well-formed, relative to what would expand from
the template.
DEV-7145
This allows for a construction like this:
```
ele_parse! {
[...]
StmtX := QN_X {
[...]
};
StmtY := QN_Y {
[...]
};
ExprA := QN_A {
[...]
};
ExprB := QN_B {
[...]
};
Expr := (A | B);
Stmt := (StmtX | StmtY);
// This previously was not allowed:
StmtOrExpr := (Stmt | Expr);
}
```
There were initially two barriers to doing so:
1. Efficiently matching; and
2. Outputting diagnostic information about the union of all expected
elements.
The first was previously resolved with the introduction of `NT::matches`,
which is macro-expanded in a way that Rust will be able to optimize a
bit. Worst case, it's effectively a linear search, but our Sum NTs are not
that deep in practice, so I don't expect that to be a concern.
The concern that I was trying to avoid was heap-allocated `NodeMatcher`s to
avoid recursive data structures, since that would have put heap access in a
very hot code path, which is not an option.
That left problem #2, which ended up being the harder problem. The solution
was detailed in the previous commit, so you should look there, but it
amounts to being able to format individual entries as if they were a part
of a list by making them a function of not just the matcher itself, but also
the number of items in (recursively) the sum type and the position of the
matcher relative to that list. The list length is easily
computed (recursively) at compile-time using `const`
functions (`NT::matches_n`).
And with that, NIR can be abstracted in sane ways using Sum NTs without a
bunch of duplication that would have been a maintenance burden and an
inevitable source of bugs (from having to duplicate NT references).
DEV-7145
This exposes the internal rendering of `ListDisplayWrapper::fmt` such that
we can output a list without actually creating a list. This is used in an
upcoming change for =ele_parse!= so that Sum NTs can render the union of all
the QNames that their constituent NTs match on, recursively, as a single
list, without having to create an ephemeral collection only for display.
If Rust supports const functions for arrays/Vecs in the future, we could
generate this at compile-time, if we were okay with the (small) cost, but
this solution seems just fine. But output may be even _more_ performant
since they'd all be adjacent in memory.
This is used in these secenarios:
1. Diagnostic messages;
2. Error messages (overlaps with #1); and
3. `Display::fmt` of the `ParseState`s themselves.
The reason that we want this to be reasonably performant is because #3
results in a _lot_ of output---easily GiB of output depending on what is
being traced. Adding heap allocations to this would make it even slower,
since a description is generated for each individual trace.
Anyway, this is a fairly simple solution, albeit a little bit less clear,
and only came after I had tried a number of other different approaches
related to recursively constructing QName lists at compile time; they
weren't worth the effort when this was so easy to do.
DEV-7145
This allows using a `[attr]` special form to stream attributes as they are
encountered rather than aggregating a static attribute list. This is
necessary in particular for short-hand template application and short-hand
function application, since the attribute names are derived from template
and function parameter lists, which are runtime values.
The syntax for this is a bit odd since there's a semi-useless and confusing
`@ {} => obj` still, but this is only going to be used by a couple of NTs
and it's not worth the time to clean this up, given the rather significant
macro complexity already.
DEV-7145
This uses the same mechanism that was introduced for handling `Text` nodes
in mixed content, allowing for arbitrary element `Open` matches for
preemption by the superstate.
This will be used to allow for template expansion virtually
anywhere. Unlike the existing TAME, it'll even allow for it at the root,
though whether that's ultimately permitted is really depending on how I
approach template expansion; it may fail during a later lowering operation.
This is interesting because this approach is only possible because of the
CPS-style trampoline implementation. Previously, with the composition-based
approach, each and every parser would have to perform this check, like we
had to previously with `Text` nodes.
As usual, this is still adding to the mess a bit, and it'll need some future
cleanup.
DEV-7145
This introduces the concept of superstate node preemption generally, which I
hope to use for template application as well, since templates can appear in
essentially any (syntatically valid, for XML) position.
This implements mixed content handling by defining the mapping on the
superstate itself, which really simplifies the problem but foregoes
fine-grained text handling. I had hoped to avoid that, but oh well.
This pushes the responsibility of whether text is semantically valid at that
position to NIR->AIR lowering (which we're not transition to yet), which is
really the better place for it anyway, since this is just the grammar. The
lowering to AIR will need to validate anyway given that template expansion
happens after NIR.
Moving on!
DEV-7145
This has been optional for many years and is not actually used by the
current compiler. TAMER can infer it, in situations where it actually
matters in the future.
So, rather than adding support for this in the new parser, let's clean up.
DEV-7145
See previous commit for an explanation. This marker is intended to be
useful while looking through commits.
This is because we utilize an unstable `int_log` feature, which is expected
to occasionally cause BC issues.
https://github.com/rust-lang/rust/pull/100332
The above MR replaces `log10` and friends with `ilog10`; this is the first
time an unstable feature bit us in a substantially backwards-incompatible
way that's a pain to deal with.
Fortunately, I'm just not going to deal with it: this is used with the
diagnostic system, which isn't yet used by our projects (outside of me
testing), and so those builds shouldn't fail before people upgrade.
This is now pending stabalization with the new name, so hopefully we're good
now:
https://github.com/rust-lang/rust/issues/70887#issuecomment-1210602692
This was accepting an early EOF when the active child `ParseState` was in an
accepting state, because it was not ensuring that anything on the stack was
also accepting.
Ideally, there should be nothing on the stack, and hopefully in the future
that's what happens. But with how things are today, it's important that, if
anything is on the stack, it is accepting.
Since `is_accepting` on the superstate is only called during finalization,
and because the check terminates early, and because the stack practically
speaking will only have a couple things on it max (unless we're in tail
position in a deeply nested tree, without TCO [yet]), this shouldn't be an
expensive check.
Implementing this did require that we expose `Context` to `is_accepting`,
which I had hoped to avoid having to do, but here we are.
DEV-7145
I wonder when this option was introduced, unless I never saw it because it
is called "quiet". But this is what I always wanted (and how I write the
output for my own tools, like progtest in this repo); the output has long
gotten far too large.
DEV-7145
Along with this change we also had to change how we handle dead states in
the superstate. So there were two problems here:
1. Sum states were not yielding a dead state after recovery, which meant
that parsing was unable to continue (we still have a `todo!`); and
2. The superstate considered it an error when there was nothing left on
the stack, because I assumed that ought not happen.
Regarding #2---it _shouldn't_ happen, _unless_ we have extra input after we
have completed parsing. Which happens to be the case for this test case,
but more importantly, we shouldn't be panicing with errors about TAMER bugs
if somebody puts extra input after a closing root tag in a source file.
DEV-7145
This does two things:
1. Places the expected list on a separate help line as a footnote where
it'll be a bit more tolerable when it inevitably overflows the terminal
width in certain contexts (we may wrap in the future); and
2. Removes angled brackets from the element names so that they (a) better
correspond with the span which highlights only the element name and (b)
do not imply that the elements take no attributes.
DEV-7145
When we match a QName against a namespace, we ought to store the matching
QName to use (a) in error messages and (b) to make available as a
binding. The former is necessary for sensible errors (rather than saying
that it's e.g. expecting a closing `t:*`) and the latter is necessary for
e.g. getting the template name out of `t:foo`.
DEV-7145
This allows matching on a namespace prefix by providing a `Prefix` instead
of a `QName`. This works, but is missing a couple notable things (and
possibly more):
1. Tracking the QName that is _actually_ matched so that it can be used in
messages stating what the expected closing tag is; and
2. Making that QName available via a binding.
This will be used to match on `t:*` in NIR. If you're wondering how
attribute parsing is supposed to work with that (of course you're wondering
that, random person reading this)---that'll have to work differently for
those matches, since template shorthand application contains argument names
as attributes.
DEV-7145
This introduces `NodeMatcher`, with the intent of introducing wildcard QName
matches for e.g. `t:*` nodes. It's not yet clear if I'll expand this to
support text nodes yet, or if I'll convert text nodes into elements to
re-use the existing system (which I had initially planned on doing, but
didn't because of the work and expense (token expansion) involved in the
conversion).
DEV-7145
I need to move on, and there are (a) a couple different ways to proceed that
I want to mull over and (b) upcoming changes that may influence my decision
one way or another.
DEV-7145
This will utilize the superstate's error object in place of nested errors,
which was the result of the previous composition-based delegation.
As you can see, all we had to do was remove the special handling of these
errors; the existing delegation setup continues to handle the types properly
with no change. The composition continues to work for `*Attr_`.
The alternative was to box inner errors, since they're far from the hot code
path, but that's clearly unnecessary.
To be clear: this is necessary to allow for recursive grammars in
`ele_parse` without creating recursive data structures in Rust.
DEV-7145
Comments ought not have any more semantic meaning than whitespace. Other
languages may have conventions that allow for various types of things in
comments, like annotations, but those are symptoms of language
limitations---we control the source language here.
DEV-7145
This properly integrates the trampoline into `ele_parse!`. The
implementation leaves some TODOs, most notably broken mixed text handling
since we can no longer intercept those tokens before passing to the
child. That is temporarily marked as incomplete; see a future commit.
The introduced test `ParseState`s were to help me reason about the system
intuitively as I struggled to track down some type errors in the monstrosity
that is `ele_parse!`. It will fail to compile if those invariants are
violated. (In the end, the problems were pretty simple to resolve, and the
struggle was the type system doing its job in telling me that I needed to
step back and try to reason about the problem again until it was intuitive.)
This keeps around the NT states for now, which are quickly used to
transition to the next NT state, like a couple of bounces on a trampoline:
NT -> Dead -> Parent -> Next NT
This could be optimized in the future, if it's worth doing.
This also makes no attempt to implement tail calls; that would have to come
after fixing mixed content and really isn't worth the added complexity
now. I (desperately) need to move on, and still have a bunch of cleanup to
do.
I had hoped for a smaller commit, but that was too difficult to do with all
the types involved.
DEV-7145
This change introduces diagnostic messages for panics. The intent is to be
able to use panics in situations where it is either not possible to or not
worth the time to recover from errors and ensure a consistent/sensible
system state. In those situations, we still ought to be able to provide the
user with useful information to attempt to get unstuck, since the error is
surely in response to some particular input, and maybe that input can be
tweaked to work around the problem.
Ideally, invalid states are avoided using the type system and statically
verified at compile-time. But this is not always possible, or in some cases
may be way more effort or cause way more code complexity than is worth,
given the unliklihood of the error occurring.
With that said, it's been interesting, over the past >10y that TAME has
existed, seeing how unlikely errors do sometimes pop up many years after
they were written. It's also interesting to have my intuition of what is
"unlikely" challenged, but hopefully it holds generally.
DEV-7145
I had previously used `Context` to hold the parser configuration for
repetition, since that was the easier option. But I now want to utilize the
`Context` for a stack for the superstate trampoline, and I don't want to
have to deal with the awkwardness of the repetition in doing so, since it
requires that the configuration be created during delegation, rather than
just being passed through to all child parsers.
This adds to a mess that needs cleaning up, but I'll do that after
everything is working.
DEV-7145
Mike Gerwitz