I'm not happy with this implementation. The linear search is undesirable,
but not too bad (and maybe wouldn't even be worth caching, if this were the
whole story), but we _also_ need to prevent duplicate identifiers. We are
not going to want to perform a linear search of a linked list (effectively)
every time we add an identifier to check for uniqueness, so I think the
caching is going to have to be generalized very shortly anyway.
As it stands now, a duplicate identifier would cause an error at expansion
time. That's not what we want, but it's not terrible, because you can have
that same problem in normal circumstances without local conflicts.
But this'll be used for metavariables as well, where we absolutely _do_ want
to fail at template definition time.
DEV-13708
Identifier lookups, as done using the graph methods today, look up from a
cache representing the global environment.
Templates must not contribute to this environment until expansion. Further,
metavariables will not be present in this environment. To avoid confusion
and help obviate accidental contributions to this environment, the methods
have been renamed. This will also allow for the creation of more general
methods down the line.
DEV-13708
This makes the tests quite a bit easier to understand visually. I've been
doing this with all new tests but had to go back to some old ones, and still
have more to go back to. Baby steps.
DEV-13708
I had intended for this to be a full vertical slice initially, but AIR's
parser is going to need enough work that it'll muddy this patch a bit too
much.
This keeps the desugaring simple, which is what I was hoping for.
The next step is to load it into the graph and emit regenerated longhand
sources.
I also don't like how the namespace prefix is just being ignored for
shorthand param desugaring. This is also the case in the XSLT-based
compiler, but this violates TAMER's principle that it should parse every bit
of information; nothing should be ignored. If something does not contribute
useful information, then it is not a useful construct and ought to be
rejected.
DEV-13708
This moves translation from NirToAir into TplShortDesugar, and changes the
output from AIR to NIR.
This is going to be much easier to reason about as a desugaring
operation (and indeed that's always how TAME has implemented it, in XSLT);
this keeps the complexity isolated.
Ideally, NirToAir wouldn't even accept tokens that it can't handle, but
that's going to take quite a bit more work and I don't have the time right
now. Instead, we'll fail at runtime with some hopefully-useful
information. It shouldn't actually happen in practice.
DEV-13708
This makes it more visually apparent, when looking directly at a node,
whether an edge could represent a tree edge.
Dynamic edges could be tree edges, so I left those solid; that's the more
important visual indicator that I'm interested in, and it's disambiguated by
the dashed line.
DEV-13708
Previous to this commit, ontological cross edges were declared
statically. But this doesn't fare well with the decided implementation for
template application.
The documentation details it, but we have Tpl->Ident which could mean "I
define this Ident once expanded", or it could mean "this is a reference to a
template I will be applying". The former is a tree edge, the latter is a
cross edge, and that determination can only be made by inspecting edge data
at runtime.
It could have been resolved by introducing new Object types, but that is a
lot of work for little benefit, especially given that only (right now) the
visitor uses this information.
DEV-13708
This this a big change that's difficult to break up, and I don't have the
energy after it.
This introduces nullary template application, short- and long-form. Note
that a body of the short form is a `@values@` argument, so that's not
supported yet.
This continues to formalize the idea of what "template application" and
"template expansion" mean in TAMER. It makes a separate `TplApply`
unnecessary, because now application is simply a reference to a
template. Expansion and application are one and the same: when a template
expands, it'll re-bind metavariables to the parent context. So in a
template context, this amounts to application.
But applying a closed template will have nothing to bind, and so is
equivalent to expansion. And since `Meta` objects are not valid outside of
a `Tpl` context, applying a non-closed template outside of another template
will be invalid.
So we get all of this with a single primitive (getting the "value" of a
template).
The expansion is conceptually like `,@` in Lisp, where we're splicing trees.
It's a mess in some spots, but I want to get this committed before I do a
little bit of cleanup.
This was missing `@FEATURES@`, which was causing more compilation than
necessary, but also causing clippy to evaluate different code.
This also adds RUSTFLAGS, for the same reason of not wanting to recompile.
DEV-13708
This chooses Option B, as stated would likely be the case in the previous
commit. The reasons are practical---I intend to support partial application
if doing so is worth it, either in implementation of the compiler or the
source language.
Closed templates can be referenced using `IdentRef` to trigger
expansion---their value is what they expand into, and they are spliced into
that point in the tree, like `,@` in Lisp. We are able to overload this
behavior because we have the necessary type information.
However, I don't want to have to generate an Ident for every single template
expansion; there are many tens of thousands of them in our production
system. Since AIR doesn't presently have a way to deal with this situation,
I'll for now add a special token that will close and expand a template in
place; it can be replaced with two separate tokens (`TplEnd` + `Ref`, for
example) in the future if such a need arises.
Are we there yet...?
DEV-13708
Also known as metavariables or template parameters.
This is a bit of a tortured excursion, trying to figure out how I want to
best represent this. I have a number of pages of hand-written notes that
I'd like to distill over time, but the rendered graph ontology (via
`asg-ontviz`) demonstrates the broad idea.
`AirTpl::TplApply` highlights some remaining questions. What I had _wanted_
to do is to separate the concepts of application and expansion, and support
partial application and such. But it's going to be too much work for now,
when it isn't needed---partial application can be worked around by simply
creating new templates and duplicating params, as we do today, although that
sucks and is a maintenance issue. But I'd rather address that head-on in
the future.
So it's looking like Option B is going to be the approach for now, with
templates being closed (as in, no free metavariables) and expanded at the
same time. This simplifies the parser and error conditions significantly
and makes it easier to utilize anonymous templates, since it'll still be the
active context.
My intent is to get at least the graph construction sorted out---not the
actual expansion and binding yet---enough that I can use templates to
represent parts of NIR that do not have proper graph representations or
desugaring yet, so that I can spit them back out again in the `xmli` file
and incrementally handle them. That was an option I had considered some
months ago, but didn't want to entertain it at the time because I wasn't
sure what doing so would look like; while it was an attractive approach
since it pushes existing primitives into the template system (something I've
wanted to do for years), I didn't want to potentially tank performance or
compromise the design for it after I had spent so much effort on all of this
so far.
But my efforts have yielded a system that significantly exceeds my initial
performance expectations, with a decent abstractions, and so this seems
viable.
DEV-13708
See the Air docblock for more information. I'm introducing new tokens for
the template system, which uses the terms "free" and "closed". I prefer
open/close for delimiters, as I've expressed elsewhere, but unfortunately it
conflicts too much (and too confusingly) with other standard terminology as
we get more into the formal side of the language.
DEV-13708
This removes special cases, but it does complicate the parent `AirAggregate`
parser. A pattern of delegation is forming, though abstracting it may be an
interesting challenge, given Rust's limitation on macro invocations as match
arms. But, I think I can manage by generating the entire match using a
macro with a match-compatible syntax, augmenting where
needed...maybe. This'll be messy.
...but if I can write the nightmare that is `ele_parse!`, I'm sure I can
manage this. I just prefer to avoid complex macros unless I really need
them.
DEV-13708
Now that these are actually intended to be used as part of the build, this
is a more appropriate location. I originally wrote it as a manual tool.
DEV-13708
This parses the declarative `object_rel!` definitions from the Rust sources
and produces a DOT representation of the ontology of the graph, which can
then be rendered using Graphviz.
This does not yet introduce it into the build; it ought to be run as part of
`make check` (without rendering with Graphviz) to ensure that we catch
breaking changes, and `make html` ought to integrate it into the
documentation, perhaps as part of `asg::graph` or `asg::graph::object`.
DEV-13708
Small break from templates for something easier. I have COVID-19, so I'll
use that as my excuse for wanting to be more lazy.
The real reason is to see some more concrete progress and ensure that
patterns hold for simple expressions before further refactoring.
But, before I proceed with such refactoring, I really ought to approach
something that requires a NIR desugaring step, like case statements.
DEV-13708
Going higher than that doesn't make sense because we're in shell and
invoking commands all around this, so even milliseconds isn't going to be
entirely accurate here. However, what I am more interested in is observing
time relative to other runs; this isn't intended for profiling, but for
eyeballing unexpected behavior.
DEV-13708
There's a lot to look at, especially in the event of failure. Further, I
wanted to add additional statistics that could be eyeballed.
Right now, tamec is too fast (at least on my machine) for the precision of
/usr/bin/time: we need milliseconds, but we only get hundredths of a
second. So it'll all show as 0:00.00s. Which is okay, for now; it just
shouldn't exceed that. ;)
DEV-13708
The intent was to have a very simple implementation of `hold_dangling` and
have everything work. But, I had a nasty surprise when the system tests
caught bug caused by some interesting depth interactions as it relates to
`xmli` and auto-closing.
I added an extra test/example in `asg::graph::visit::test` to illustrate the
situation; it was difficult to derive from the traces, but trivially obvious
once I wrote it out as an example.
With that, templates can now aggregate tokens for dangling expressions.
DEV-13708
This won't try the fixpoint test if the prior one fails, which will always
cause that one to fail. And it further won't attempt the diff on
compilation failure.
DEV-13708
And finally we have tokens aggregated onto the ASG in the context of a
template. I expected to arrive here much more quickly, but there was a lot
of necessary refactoring. There's a lot more that could be done, but I need
to continue; I had wanted this done a week ago.
It is worth noting, though, that this finally achieves something I had been
wondering about since the inception of this project---how I'd represent
templates on the graph. I think this worked out rather nicely. It wasn't
even until a few months ago that I decided to use AIR instead of NIR for
that purpose (NIR wouldn't have worked).
And note how I didn't have to touch the program derivation at all---the
system test just works with the AIR change, because of the consistent
construction of the graph. Beautiful.
DEV-13708
This hoists the errors back into `AirAggregate`; I need dead states for the
`AirTplAggregate` parser so that it will know when to (and not to) interpret
tokens in the context of the template itself.
In a previous commit message, I had pondered whether it may be possible to
eliminate the dead state transition, and yet here I've used it with both of
the sub-parsers now. So it seems like the better option in the future may
be to narrow the type further---to say precisely _what_ types of tokens may
yield a dead state transition; otherwise you lose the match information from
the parser that yielded it.
A stubbornly persistent problem in Rust, this magical and hidden match
knowledge.
DEV-13708
This sets us up to be able to determine how `Dangling` expressions will be
rooted into templates.
This new strategy isn't yet handling `Dangling`; I wanted to get this
committed first so that the `Dangling` refactoring is more clear.
DEV-13708
Expressions were previously tied to packages. This prepares for using a
`Tpl` as a container for expressions.
This does not yet handle the situation of auto-rooting dangling expressions
within the container.
DEV-13708
This result in less useful debug output, but it'll be needed for using
a (possibly-anonymous) template as evidence.
This evidence is simply for debugging, and to require some sort of value
during development to help obviate when maybe something is being done
incorrectly (if no obvious value exists).
DEV-13708
This is more of the same refactoring that has been happening. This
extraction also helps emphasize the relationship between imported objects,
and isolates the growing number of test cases. This parser will only grow.
DEV-13708
Just as was done with the expression parser, which this will utilize. This
initializes it, but doesn't yet make use of it (`AirExprAggregate`).
Refactoring was definitely needed; decomposing this is quite a bit of work,
in no small part because of the complexity. This helps significantly.
DEV-13708
This works around limitations of Rust's borrow checker as of the time of
writing. See the provided documentation for more information.
The branch context is not yet exposed to the `delegate` family of methods;
it will be added only as needed in the future.
DEV-13708
This delegates expression parsing to `AirExprAggregate`, in an effort to
both begin to simplify the understanding and maintenance of `AirAggregate`;
and allow for parser composition for template parsing.
This utilizes the prior changes for token sum types to precisely define the
subset of AIR tokens supported by the expression parser. This differs from
prior approaches which delegated until a dead state, relying on runtime
information to determine if a parser has finished. This allows us to
determine that statically.
I do want to be able to eliminate the dead state from the parser so we can
get rid of the `unreachable!`, but I need to move on; that's something I had
tried to do in the past too, which ended up adding a bit of complexity, and
I'll have to consider my options in the future, including whether the dead
state transition can be entirely eliminated in favor of the combination of
these sum types and recovery; the parsing framework decisions were made
while recovery was still an open question, at least in practice.
DEV-13708
This was a rather frustrating thing to encounter. I was working on
refactoring `AirAggregate`, and found that my tests were hanging despite no
apparent cause in the parser itself.
As it turns out, rather than failing with a `FinalizeError` as I
expected (since I was mid-refactor), `collect()` was allocating space for an
endless stream of errors. This was easily verified by adding a `take(x)`
and observing the assertion failure (in this case, in `close_pkg_mid_expr`).
This happens to be the first time in a long time that I actually had to
debug---the combination of robust types as proofs and tests to fill in the
gaps means that runtime issues are caught at build time in all but
exceptional cases (like this one).
It's also worth noting that, because of my policy of iterating only at the
higher levels of the program, it was clear that this must somehow be
Parser-related, since that's the only part of the system that has the
potential for unbounded recursion due to its cyclic state machines.
DEV-13708
This introduces a new macro `sum_ir!` to help with a long-standing problem
of not being able to easily narrow types in Rust without a whole lot of
boilerplate. This patch includes a bit of documentation, so see that for
more information.
This was not a welcome change---I jumped down this rabbit hole trying to
decompose `AirAggregate` so that I can share portions of parsing with the
current parser and a template parser. I can now proceed with that.
This is not the only implementation that I had tried. I previously inverted
the approach, as I've been doing manually for some time: manually create
types to hold the sets of variants, and then create a sum type to hold those
types. That works, but it resulted in a mess for systems that have to use
the IR, since now you have two enums to contend with. I didn't find that to
be appropriate, because we shouldn't complicate the external API for
implementation details.
The enum for IRs is supposed to be like a bytecode---a list of operations
that can be performed with the IR. They can be grouped if it makes sense
for a public API, but in my case, I only wanted subsets for the sake of
delegating responsibilities to smaller subsystems, while retaining the
context that `match` provides via its exhaustiveness checking but does not
expose as something concrete (which is deeply frustrating!).
Anyway, here we are; this'll be refined over time, hopefully, and
portions of it can be generalized for removing boilerplate from other IRs.
Another thing to note is that this syntax is really a compromise---I had to
move on, and I was spending too much time trying to get creative with
`macro_rules!`. It isn't the best, and it doesn't seem very Rust-like in
some places and is therefore not necessarily all that intuitive. This can
be refined further in the future. But the end result, all things
considered, isn't too bad.
DEV-13708
This sets the stage for template parsing, and finally decides how we're
going to represent templates on the ASG. This is going to start simple,
since my original plans for improving how templates are
handled (conceptually) is going to have to wait.
This is the last difficult object type to figure out, with respect to graph
representation and derivation, so I wanted to get it out of the way.
DEV-13708
I wasn't initially sure whether I'd want separate tokens for different types
of identifying operations, but now that I see that it is clear from the
current state of the parser, there's no need.
This matches the name of the token in NIR.
DEV-13708
The previous commit demonstrated the amount of boilerplate necessary for
introducing new `ObjectKind`s; this abstracts away a lot of that
boilerplate, and allows for declarative relationship definition for the
ASG's ontology.
DEV-13708
There's quite a bit of boilerplate here that'll eventually need factoring
out. But it's also clear that it is somewhat onerous to add new object
types.
Note that a good chunk of this burden is _intentional_, via exhaustiveness
checks---adding a new type of object is an exceptional occurrence (well, in
principle, but we haven't added them all yet, so it'll be more common
initially), and we'd rather be safe to ensure that everything is properly
considering how that new type of object interacts with it.
Let's not confuse coupling with safety---the latter causes a burden because
of the former, not because of itself; it provides a service to us.
But, nonetheless, we'll want to reduce this burden somewhat since there are
a number more to add.
DEV-13708
Mike Gerwitz