I'm struggling to go much further yet without sorting out some other things
first with regards to mutable `Context` and, in particular, the ASG.
I'm going to pause on refactoring the lowering pipeline---it's been improved
significantly with the recent work---and I will continue in the next few
weeks.
DEV-13158
Lowering errors in tamec end up utilizing recovery and reporting, so there
is a distinction between recoverable and unrecoverable errors.
tameld aborts on the first error, since recovery is not currently
supported (we'll want to add it, since tameld should output e.g. lists of
unresolved externs).
Note that tamec does not yet handle `FinalizeError` like tameld because it
uses `Lower::lower`, which does not yet finalize (though it does in practice
when it reaches the end of the stream and auto-finalizes, but that is
widened into a `ParseError`).
DEV-13158
This helps to clarify the situations under which these errors can occur, and
the generality also helps to show why the inner types are as they
are (e.g. use of `String`).
But more importantly, this allows for an error type in `finalize` that is
detached from the `ParseState`, which will be able to be utilized in the
lowering pipeline as a more general error distinguishable from other
lowering errors. At the moment I'm maintaining BC, but a following commit
will demonstrate the use case to introduce recoverable vs. non-recoverable
errors.
DEV-13158
This newtype allows a caller to prove (using types) that a parser of a given
type (`ParseState`) has been finalized.
This will be used by the lowering pipeline to ensure that all parsers in the
pipeline end up getting finalized (as you can see from a TODO added in the
code, one of them is missing). The lack of such a type was an oversight
during the (rather stressed) development of the parsing system, and I
shouldn't need to resort to unit tests to verify that parsers have been
finalized.
DEV-13158
This reverts commit 85ec626fcd804eb2fac3fd6f0339182554f72cfd.
This revert had to be modified to work alongside other changes. Interior
mutability is fortunately no longer needed after the previous commit which
allows reporting to occur in a single place in the lowering pipeline (at the
terminal parser).
DEV-13158
The term "terminal parser" isn't formalized yet in the system, but is meant
to refer to the innermost parser that is responsible for pulling tokens
through the lowering pipeline.
This approach is more of what one would expect when dealing with
`Result`-like monads---we are effectively chaining the inner operation while
propagating errors to short-circuit lowering and let the caller decide
whether recovery ought to be permitted with diagnostic messages. This will
become more clear as it is further refactored.
This also means that the previous changes for introducing interior
mutability for a shared mutable `Reporter` can be reverted, which is great,
since that approach was antithetical to how the streaming pipeline
operates (and introduces awkward mutable state into an
otherwise-mostly-immutable system).
DEV-13158
This extracts error tracking into the Reporter itself, which is already
shared between lowering operations. This can then be used to display the
number of errors.
A new formatter (in tamer::fmt) will be added to handle the singular/plural
conversion in place of "error(s)" in the future; I have more important
things to work on right now.
DEV-13158
Previously these errors would immediately abort.
This results in some duplicate code, but it's beginning to derive a common
implementation. Check out the commits that follow; this is really an
intermediate refactoring state.
DEV-13158
Another baby step. The small commits are intended to allow comprehension of
what changes when looking at the diffs.
This also removes a comment stating that errors do not fail compilation,
since they most certainly do.
DEV-13158
This begins refactoring the lowering pipeline to begin to obviate
abstraction boundaries. The lowering pipeline is the backbone of the
system, and so it needs to become clear and self-documenting, which will
take a little bit of work.
DEV-13158
This always annoys me when I add a dependency and I don't know where I ought
to put it.
Anyway, I was originally going to add the `regex` crate, but with further
planning, I may not end up having use for it. Nonetheless, at least this is
consistent.
Just preparing to actually define NIR itself. The _grammar_ has been
represented (derived from our internal systems, using them as a test case),
but the IR itself has not yet received a definition.
DEV-7145
This is a quick-and-dirty change. The lowering pipeline needs a proper
abstraction, but I'm about to be on vacation at the end of the week and
would like to get NIR->AIR lowering started before I consider that
abstraction further, so this will do for now.
NIR parsing has been tested in production without failing for over a week.
DEV-7145
This was originally the "noramlized" IR, but that's not possible to do
without template expansion, which is going to happen at a later point. So,
this is just "NIR", pronounced "near", which is an IR that is "near" to the
source code. You can define it was "Near IR" if you want, but it's just a
homonym with a not-quite-defined acronym to me.
DEV-7145
A type alias was added for BC before errors were hoisted out in a previous
commit, but they are unnecessary because of the associated type on
`ParseState`.
This also corrects the long-existing issue of using generated identifiers in
tests.
DEV-7145
This moves `paste::paste!` up a line and reduces a level of indentation,
since it's so squished. Aside from docblock reformatting, there are no
other changes.
DEV-7145
This slims out the macro even further. It does result in an
awkwardly-placed `PhantomData` because I don't want to add another variant
that isn't actually used (since they represent states).
DEV-7145
This is in preparation for hoisting out the common states, as was done with
the Sum NT in a previous commit.
I also think that organizing states in this way is more clear. The previous
embedding of the variants named after the NTs themselves was because the
parser was storing the child state within it, before the introduction of the
superstate trampoline.
DEV-7145
Everything except for one state was already accounted for. We can now have
confidence that the parser will never panic due to state transitions (beyond
legitimate error conditions).
There are some `unreachable!`s to contend with still.
DEV-7145
This is the same as the previous commits, but for non-sum NTs.
This also extracts errors into a separate module, which I had hoped to do in
a separate commit, but it's not worth separating them. My _original_ reason
for doing so was debugging (I'll get into that below), but I had wanted to
trim down `ele.rs` anyway, since that mess is large and a lot to grok.
My debugging was trying to figure out why Rust was failing to derive
`PartialEq` on `NtError` because of `AttrParseError`. As it turns out,
`AttrParseError::InvalidValue` was failing, thus the introduction of the
`PartialEq` trait bound on `AttrParseState::ValueError`. Figuring this out
required implementing `PartialEq` myself without `derive` (well, using LSP,
which did all the work for me).
I'm not sure why this was not failing previously, which is a bit of a
concern, though perhaps in the context of the macro-expanded code, Rust was
able to properly resolve the types.
DEV-7145
The `ele_parse!` macro is a monstrosity, and expands into many different
identifiers. The hope is that chipping away at things like this will not
only make the template easier to understand by framing portions of the
problem in terms of more traditional Rust code, but will also hopefully
reduce compile times by reducing the amount of code that is expanded by the
macro.
DEV-7145
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
This includes when on the last state / expecting a close.
Previously, there were a couple major issues:
1. After parsing an NT, we can't allow preemption because we must emit a
dead state so that we can remove the NT from the stack, otherwise
they'll never close (until the parent does) and that results in
unbounded stack growth for a lot of siblings. Therefore, we cannot
preempt on `Text`, which causes the NT to receive it, emit a dead
state, transition away from the NT, and not accept another NT of the
same type after `Text`.
2. When encountering an unknown element, the error message stated that a
closing tag was expected rather than one of the elements accepted by the
final NT.
For #1, this was solved by allowing the parent to transition back to the NT
if it would have been matched by the previous NT. A future change may
therefore allow us to remove repetition handling entirely and allow the
parent to deal with it (maybe).
For #2, the trouble is with the parser generator macro---we don't have a
good way of knowing the last NT, and the last NT may not even exist if none
was provided. This solution is a compromise, after having tried and failed
at many others; I desperately need to move on, and this results in the
correct behavior and doesn't sacrifice performance. But it can be done
better in the future.
It's also worth noting for #2 that the behavior isn't _entirely_ desirable,
but in practice it is mostly correct. Specifically, if we encounter an
unknown token, we're going to blow through all NTs until the last one, which
will be forced to handle it. After that, we cannot return to a previous NT,
and so we've forefitted the ability to parse anything that came before it.
NIR's grammar is such that sequences are rare and, if present, there's
really only ever two NTs, and so this awkward behavior will rarely cause
practical issues. With that said, it ought to be improved in the future,
but let's wait to see if other parts of the lowering pipeline provide more
appropriate places to handle some of these things (even though it really
ought to be handled at the grammar level).
But I'm well out of time to spend on this. I have to move on.
DEV-7145
`ele_parse!` was recently converted to accept zero-or-more for every NT to
simplify the parser-generator, since NIR isn't going to be able to
accurately determine whether child requirements are met anyway (because of
the template system).
This ensures that `Close` can be accepted when we're expecting an
element. It also adds a test for a scenario that's causing me some trouble
in stashed code so that I can ensure that it doesn't break.
DEV-7145
This sets the maximum depth to 64, which is still arbitrary, but
unfortunately the sum types introduce multiple levels of nesting, in
particular for template applications, so nested applications can result in a
fairly large stack.
I have various ideas to improve upon that---limited a bit in that repetition
as it is current implemented inhibits tail calls---but they're not worth
doing just yet relative to other priorities. The impact of this change is
not significant.
DEV-7145
This removes support for configurable repetition.
What? Why?
As it turns out, the complexity that repetition adds is quite significant
and is not worth the effort. The truth is that NIR is going to have to
allow zero-or-more matches on virtually everything _anyway_ because template
application is allowed virtually anywhere---it is not possible to fully
statically analyze TAME's sources because templates can expand into just
about anything. Given that, AIR (or something down the line) is going to
have to supply the necessary invariants instead.
It does suck, though, that this removes a lot of code that I fairly recently
wrote, and spent a decent amount of time on. But it's important to know
when to cut your losses.
Perhaps I could have planned better, but deriving this whole system as been
quite the experiment.
DEV-7145
If attributes fail to parse (e.g. missing required attribute) and parsing
reaches a dead state, this will recover by ignoring the entire element. It
previously panicked with a TODO.
DEV-7145
These were initially used to prevent conflicts with generated variants, but
we are no longer generating such variants since they're being jumped to via
the trampoline.
DEV-7145
I'm starting to clean up some TODOs, and this was a glaring one causing
panics when encountered. The recovery for this is simple, because we have
no choice: just stop parsing; leave it to the next lowering operation(s) to
complain that we didn't provide what was necessary. They'll have to,
anyway, since templates mean that NIR cannot ever have enough information to
guarantee that a document is well-formed, relative to what would expand from
the template.
DEV-7145
This allows for a construction like this:
```
ele_parse! {
[...]
StmtX := QN_X {
[...]
};
StmtY := QN_Y {
[...]
};
ExprA := QN_A {
[...]
};
ExprB := QN_B {
[...]
};
Expr := (A | B);
Stmt := (StmtX | StmtY);
// This previously was not allowed:
StmtOrExpr := (Stmt | Expr);
}
```
There were initially two barriers to doing so:
1. Efficiently matching; and
2. Outputting diagnostic information about the union of all expected
elements.
The first was previously resolved with the introduction of `NT::matches`,
which is macro-expanded in a way that Rust will be able to optimize a
bit. Worst case, it's effectively a linear search, but our Sum NTs are not
that deep in practice, so I don't expect that to be a concern.
The concern that I was trying to avoid was heap-allocated `NodeMatcher`s to
avoid recursive data structures, since that would have put heap access in a
very hot code path, which is not an option.
That left problem #2, which ended up being the harder problem. The solution
was detailed in the previous commit, so you should look there, but it
amounts to being able to format individual entries as if they were a part
of a list by making them a function of not just the matcher itself, but also
the number of items in (recursively) the sum type and the position of the
matcher relative to that list. The list length is easily
computed (recursively) at compile-time using `const`
functions (`NT::matches_n`).
And with that, NIR can be abstracted in sane ways using Sum NTs without a
bunch of duplication that would have been a maintenance burden and an
inevitable source of bugs (from having to duplicate NT references).
DEV-7145
This exposes the internal rendering of `ListDisplayWrapper::fmt` such that
we can output a list without actually creating a list. This is used in an
upcoming change for =ele_parse!= so that Sum NTs can render the union of all
the QNames that their constituent NTs match on, recursively, as a single
list, without having to create an ephemeral collection only for display.
If Rust supports const functions for arrays/Vecs in the future, we could
generate this at compile-time, if we were okay with the (small) cost, but
this solution seems just fine. But output may be even _more_ performant
since they'd all be adjacent in memory.
This is used in these secenarios:
1. Diagnostic messages;
2. Error messages (overlaps with #1); and
3. `Display::fmt` of the `ParseState`s themselves.
The reason that we want this to be reasonably performant is because #3
results in a _lot_ of output---easily GiB of output depending on what is
being traced. Adding heap allocations to this would make it even slower,
since a description is generated for each individual trace.
Anyway, this is a fairly simple solution, albeit a little bit less clear,
and only came after I had tried a number of other different approaches
related to recursively constructing QName lists at compile time; they
weren't worth the effort when this was so easy to do.
DEV-7145
This allows using a `[attr]` special form to stream attributes as they are
encountered rather than aggregating a static attribute list. This is
necessary in particular for short-hand template application and short-hand
function application, since the attribute names are derived from template
and function parameter lists, which are runtime values.
The syntax for this is a bit odd since there's a semi-useless and confusing
`@ {} => obj` still, but this is only going to be used by a couple of NTs
and it's not worth the time to clean this up, given the rather significant
macro complexity already.
DEV-7145
This uses the same mechanism that was introduced for handling `Text` nodes
in mixed content, allowing for arbitrary element `Open` matches for
preemption by the superstate.
This will be used to allow for template expansion virtually
anywhere. Unlike the existing TAME, it'll even allow for it at the root,
though whether that's ultimately permitted is really depending on how I
approach template expansion; it may fail during a later lowering operation.
This is interesting because this approach is only possible because of the
CPS-style trampoline implementation. Previously, with the composition-based
approach, each and every parser would have to perform this check, like we
had to previously with `Text` nodes.
As usual, this is still adding to the mess a bit, and it'll need some future
cleanup.
DEV-7145
This introduces the concept of superstate node preemption generally, which I
hope to use for template application as well, since templates can appear in
essentially any (syntatically valid, for XML) position.
This implements mixed content handling by defining the mapping on the
superstate itself, which really simplifies the problem but foregoes
fine-grained text handling. I had hoped to avoid that, but oh well.
This pushes the responsibility of whether text is semantically valid at that
position to NIR->AIR lowering (which we're not transition to yet), which is
really the better place for it anyway, since this is just the grammar. The
lowering to AIR will need to validate anyway given that template expansion
happens after NIR.
Moving on!
DEV-7145
https://github.com/rust-lang/rust/pull/100332
The above MR replaces `log10` and friends with `ilog10`; this is the first
time an unstable feature bit us in a substantially backwards-incompatible
way that's a pain to deal with.
Fortunately, I'm just not going to deal with it: this is used with the
diagnostic system, which isn't yet used by our projects (outside of me
testing), and so those builds shouldn't fail before people upgrade.
This is now pending stabalization with the new name, so hopefully we're good
now:
https://github.com/rust-lang/rust/issues/70887#issuecomment-1210602692
Mike Gerwitz
Brandon Ellis