The previous commit introduced canonical names, and this uses them to index.
The next step will be to utilize those names to look up packages on
definition rather than creating a new package node, so that references to
yet-to-be-defined (or yet-to-be-imported) packages can be resolved on the
graph.
DEV-13162
This is already a concept in the XSLT-based compiler, where each package has
a `package/@name` generated from its path. The same will happen with tamec.
Before we can load packages into the graph, we need canonical identifiers so
that they can be indexed. The next commit will handle indexing using this
information.
DEV-13162
This commit includes plenty of documentation, so you should look there.
It's desirable to describe the sorting that TAME performs as a topological
sort, since that's the end result we want. This uses the ontology to
determine what to do to the graph when a cycle is encountered. So
technically we're sorting a graph with cycles, but you can equivalently view
this as first transforming the graph to cut all cycles and then sorting it.
For the sake of trivia, the term "cut" is used for two reasons: (1) it's an
intuitive visualization, and (2) the term "cut" has precedence in logic
programming (e.g. Prolog), where it (`!`) is used to prevent
backtracking. We're also preventing backtracking, via a back edge, which
would produce a cycle.
DEV-13162
This introduces cycle detection, but it does not yet filter ontologically
permitted cycles, which will be needed prior to utilizing this in `tameld`.
There's a considerable amount of documentation here. While the
implementation is fairly simple, there are important algorithmic decisions,
both in the DFS construction and the derivation of the cycle path from data
that already exists.
This also supports recovery (by ignoring cycles), which can then be utilized
to find more cycles and other errors in the system.
DEV-13162
This is an initial implementation that does not yet produce errors on
cycles. Documentation is not yet complete.
The implementation is fairly basic, and similar to Petgraph's DFS.
A terminology note: the DFS will be ontology-aware (or at least aware of
edge metadata) to avoid traversing edges that would introduce cycles in
situations where they are permitted, which effectively performs a
topological sort on an implicitly _filtered_ graph.
This will end up replacing ld::xmle::lower::sort.
DEV-13162
tameld isn't yet adding edges to Idents from their associated Pkg (see
previous commit), but this formalizes how the ontology will interpret such a
relationship. The idea is that Idents are always owned by Pkgs, but they
may be optionally explicitly rooted, which will be used by a particular type
of DFS walk that is about to be written, which can ignore Root->Pkg and
focus instead on cross edges to Idents.
Though it's not lost on me that now that I'll be introducing a DFS for the
linker, the terms "cross" and "tree" edge now become ambiguous; I used to
call them "ontological X edge", but I had fallen out of that habit; perhaps
I need to reintroduce that rigor.
DEV-13162
This may now index _any_ type of object, in preparation for indexing package
import paths. In practice, this only makes sense (at least currently) for
`Pkg` and `Ident`.
This generalization also applies to `Asg::lookup_or_missing`.
DEV-13162
Historically, the ASG was better described as a "dependency graph",
containing only identifiers (which are simply called "symbols" in the
XSLT-based compiler). Consequently, it was appropriate for the graph to
have operations specific to identifiers. (Indeed, that's the only type of
object the graph supported.)
Much has changed since then. This cleans things up, and makes parenting
identifiers to root an _explicit_ operation. This will make it easier to
move forward with handling of scope, and importing identifiers into
packages, and removing `Source`, and so on.
DEV-13162
I've been torturing myself trying to figure out how I want to generalize
indexing, lookups, and value numbering in a way that is appropriate for this
project (that is, not over-engineered relative to my needs).
Before I can do much of anything, though, I need to stop having indexing
only as a `Root` thing (previously it wasn't even tied to `Root`). This
makes that change for tamec, but temporarily removes scoping concerns until
I can add more specific types of indexing.
Not only does this allow cleaning up some `Ident`-specific stuff from `Asg`,
but the cleanup also helps to show that portions of the system aren't still
using Root-based globals.
The linker (`tameld`) still uses the old `global` methods for now; those
will eventually go away, but this needs to change to unify both tamec and
tameld once we get to imports as part of the compiler.
DEV-13162
This is needed to then support `@desc` for shorthand desugaring; it's
required by the XSLT-based compiler (and will eventually be required by
TAMER too).
DEV-13708
This supports arbitrary documentation as sibling text (mixed content, in XML
terms). The motivation behind this change is to permit existing system
tests to succeed when `Todo | TodoAttr` are both rejected, rather than
having to ignore this.
TAME has always had a philosophy of literate documentation, however it was
never fully realized. This just maintains the status quo; the text is
unstructured, and maybe will be parsed in the future.
Unfortunately, this does _not_ include the output in the `xmli` file or the
system tests. The reason has nothing to do with TAMER---`xmllint` does not
format the output when there is mixed content, it seems, and I need to move
on for now; I'll consider my options in the future. But, it's available on
the graph and ready to go.
DEV-13708
This introduces a new `Doc` object that can be owned by `Expr` (only atm)
and contain what it describes as a concise independent clause. This
construction is not enforced, and is only really obvious today via the
Summary Pages.
There's a lot of latent and unrealized potential in TAME's documentation
philosophy that was never realized, so this will certainly evolve over
time. But for now, the primary purpose was to get `@desc` working on things
like classifications so that `xmli` output can compile for certain
packages.
DEV-13708
These are used by virtually every `ObjectKind`; I've been meaning to do this
for a while, but now that I'm about to introduce a new one (`Doc`), let's
just get it out of the way.
DEV-13708
This doesn't do the actual hard work yet of resolving and loading a package,
but it does place it on the graph and re-derive it into the xmli output.
DEV-13708
This introduces `<match on="foo" />` and `<match on="foo" value="bar" />`,
which are both equality predicates. Other types of predicates are not yet
supported.
This change is a bit messy and leaves a bit to be desired. `NirToAir` is
quite messy and needs some cleanup. There's also the issue of introducing
XML-specific errors in NIR so that users know what things like "subject"
mean, but not being able to do so yet because NIR is agnostic to the source
document type; another layer of abstraction is needed.
But, my priority is first to get derivation of a particularly
expensive (generated) package in our internal systems working first.
DEV-13708
This recognizes template application within expressions. Since expressions
can occur within templates, this can occur arbitrarily deeply.
And with that, we have the core of the template system represented on the
graph. Of course, there are some glaring scoping issues to be resolved, but
those aren't unique to template application.
DEV-13708
I had hoped this would be considerably easier to implement, but there are
some confounding factors.
First of all: this accomplishes the initial task of getting nested template
applications and definitions re-output in the `xmli` file. But to do so
successfully, some assumptions had to be made.
The primary issue is that of scope. The old (XSLT-based) TAME relied on the
output JS to handle lexical scope for it at runtime in most situations. In
the case of the template system, when scoping/shadowing were needed, complex
and buggy XPaths were used to make a best effort. The equivalent here would
be a graph traversal, which is not ideal.
I had begun going down the rabbit hole of formalizing lexical scope for
TAMER with environments, but I want to get this committed and working first;
I've been holding onto this and breaking off changes for some time now.
DEV-13708
All ObjectIndex-like objects hash using only the underlying identifier,
which ultimately boils down to a `NodeIndex` (petgraph), which is just a
u32. And so in that sense, the only purpose we have for hashing it is to
(a) reduce the space required to store mappings, and (b) compose with other
`Hash`es.
DEV-13708
This creates another trait and struct `ObjectIndexToTree` that assert a
stronger invariant than `ObjectIndexRelTo`---that not only does it uphold
the invariants of `ObjectIndexRelTo`, but also that it represents a _tree_
edge, which indicates _ownership_ rather than just a reference.
This will be used to statically infer what can serve as a scope boundary for
upcoming changes. Specifically, anything that can own an `Ident` introduces
a new level of scope.
DEV-13708
This allows this method to be used on anything that is able to relate to an
identifier, which is needed for the changes being made for the template
system.
This linear lookup is actually going away (as hinted at by preceding
commits); this is extracted as part of a larger change and I wanted to get
it committed to make it easier to follow upcoming changes.
DEV-13708
This is more of the same of the previous commit, but in a more digestable
chunk. We now have child states that are able to be constructed using a
simple `From`, which is important to making `AirAggregate` a `SuperState`.
This also makes `AirStack` act like a prototype chain for `ObjectIndex`es,
creating environments where context shadows. The linear search should only
have to check the last two frames (e.g. an Expr has a parent Pkg or Tpl
context which will have a `rooting_oi` value), and this is only done during
a rooting operation.
DEV-13708
This begins to introduce `AirStack` and starts to migrate context away from
the individual `ParseState`s onto the stack.
I should have started to commit earlier; this is getting a bit large and
makes it hard to follow what I'm doing so, hopefully stopping a little bit
short will allow the following commit to show that.
This is a work-in-progress change. All tests pass, but the refactoring is
incomplete. The `AirStack` abstraction is _also_ incomplete and will have
better, more domain-specific operations that make it harder to mess up
pairing pushes with pops.
The purpose of doing this is to allow `AirAggregate` to serve exclusively as
a sum state, which can then become a SuperState, much like `ele_parse!`'s
approach.
The _end_ goal of all of this is arbitrary template nesting.
DEV-13708
The graph's ontology is defined in the direction of the edge: from OA
to OB. This is enforced by the type system to ensure that no code path is
able to generate an invalid graph.
But that also makes it very difficult to work with a generic source to a
specific target.
This introduces a `ObjectIndexRelTo` trait that says whether `Self` is able
to be related to some `ObjectKind` `OB`, implements it for `ObjectIndex
where ObjectRelTo<OB>`, and introduces a new semi-opaque type
`ObjectIndexTo` that allows for the source `ObjectIndex` to be generic.
This then redefines some existing graph primitives in terms of
`ObjectIndexRelTo`, in particular creating edges, so that `ObjectIndex` can
be used as today, and the new `ObjectIndexTo` can be used in the same way
with the same API, without violating the graph ontology.
This will be used by `AirAggregate` to create dynamic targets for rooting
and splicing/expansion.
DEV-13708
Previously, `AirTplAggregate` worked only in a `Pkg` context, being able to
root `Tpl` `Ident`s in `Pkg` and expand only into `Pkg`. This still does
the same, but generalizes to allow for different roots and expansion
targets.
This will be utilized to parse nested templates.
DEV-13708
This applies to template application only; there's still some work to do for
template parameters in definitions (well, for deriving them in `xmli` at
least). And, as you can see, there's still a lot of TODO items here.
I ended up backtracking on tree edges to Meta, and even on cross edges to
Meta, because it complicated xmli derivation with no benefit right now;
maybe a cross edge will be re-added in the future, but I need to move on and
see where this takes me.
But, it works.
DEV-13708
I'm not happy with this implementation. The linear search is undesirable,
but not too bad (and maybe wouldn't even be worth caching, if this were the
whole story), but we _also_ need to prevent duplicate identifiers. We are
not going to want to perform a linear search of a linked list (effectively)
every time we add an identifier to check for uniqueness, so I think the
caching is going to have to be generalized very shortly anyway.
As it stands now, a duplicate identifier would cause an error at expansion
time. That's not what we want, but it's not terrible, because you can have
that same problem in normal circumstances without local conflicts.
But this'll be used for metavariables as well, where we absolutely _do_ want
to fail at template definition time.
DEV-13708
Identifier lookups, as done using the graph methods today, look up from a
cache representing the global environment.
Templates must not contribute to this environment until expansion. Further,
metavariables will not be present in this environment. To avoid confusion
and help obviate accidental contributions to this environment, the methods
have been renamed. This will also allow for the creation of more general
methods down the line.
DEV-13708
Previous to this commit, ontological cross edges were declared
statically. But this doesn't fare well with the decided implementation for
template application.
The documentation details it, but we have Tpl->Ident which could mean "I
define this Ident once expanded", or it could mean "this is a reference to a
template I will be applying". The former is a tree edge, the latter is a
cross edge, and that determination can only be made by inspecting edge data
at runtime.
It could have been resolved by introducing new Object types, but that is a
lot of work for little benefit, especially given that only (right now) the
visitor uses this information.
DEV-13708
This this a big change that's difficult to break up, and I don't have the
energy after it.
This introduces nullary template application, short- and long-form. Note
that a body of the short form is a `@values@` argument, so that's not
supported yet.
This continues to formalize the idea of what "template application" and
"template expansion" mean in TAMER. It makes a separate `TplApply`
unnecessary, because now application is simply a reference to a
template. Expansion and application are one and the same: when a template
expands, it'll re-bind metavariables to the parent context. So in a
template context, this amounts to application.
But applying a closed template will have nothing to bind, and so is
equivalent to expansion. And since `Meta` objects are not valid outside of
a `Tpl` context, applying a non-closed template outside of another template
will be invalid.
So we get all of this with a single primitive (getting the "value" of a
template).
The expansion is conceptually like `,@` in Lisp, where we're splicing trees.
It's a mess in some spots, but I want to get this committed before I do a
little bit of cleanup.
Also known as metavariables or template parameters.
This is a bit of a tortured excursion, trying to figure out how I want to
best represent this. I have a number of pages of hand-written notes that
I'd like to distill over time, but the rendered graph ontology (via
`asg-ontviz`) demonstrates the broad idea.
`AirTpl::TplApply` highlights some remaining questions. What I had _wanted_
to do is to separate the concepts of application and expansion, and support
partial application and such. But it's going to be too much work for now,
when it isn't needed---partial application can be worked around by simply
creating new templates and duplicating params, as we do today, although that
sucks and is a maintenance issue. But I'd rather address that head-on in
the future.
So it's looking like Option B is going to be the approach for now, with
templates being closed (as in, no free metavariables) and expanded at the
same time. This simplifies the parser and error conditions significantly
and makes it easier to utilize anonymous templates, since it'll still be the
active context.
My intent is to get at least the graph construction sorted out---not the
actual expansion and binding yet---enough that I can use templates to
represent parts of NIR that do not have proper graph representations or
desugaring yet, so that I can spit them back out again in the `xmli` file
and incrementally handle them. That was an option I had considered some
months ago, but didn't want to entertain it at the time because I wasn't
sure what doing so would look like; while it was an attractive approach
since it pushes existing primitives into the template system (something I've
wanted to do for years), I didn't want to potentially tank performance or
compromise the design for it after I had spent so much effort on all of this
so far.
But my efforts have yielded a system that significantly exceeds my initial
performance expectations, with a decent abstractions, and so this seems
viable.
DEV-13708
See the Air docblock for more information. I'm introducing new tokens for
the template system, which uses the terms "free" and "closed". I prefer
open/close for delimiters, as I've expressed elsewhere, but unfortunately it
conflicts too much (and too confusingly) with other standard terminology as
we get more into the formal side of the language.
DEV-13708
Small break from templates for something easier. I have COVID-19, so I'll
use that as my excuse for wanting to be more lazy.
The real reason is to see some more concrete progress and ensure that
patterns hold for simple expressions before further refactoring.
But, before I proceed with such refactoring, I really ought to approach
something that requires a NIR desugaring step, like case statements.
DEV-13708
The intent was to have a very simple implementation of `hold_dangling` and
have everything work. But, I had a nasty surprise when the system tests
caught bug caused by some interesting depth interactions as it relates to
`xmli` and auto-closing.
I added an extra test/example in `asg::graph::visit::test` to illustrate the
situation; it was difficult to derive from the traces, but trivially obvious
once I wrote it out as an example.
With that, templates can now aggregate tokens for dangling expressions.
DEV-13708
This sets us up to be able to determine how `Dangling` expressions will be
rooted into templates.
This new strategy isn't yet handling `Dangling`; I wanted to get this
committed first so that the `Dangling` refactoring is more clear.
DEV-13708
Expressions were previously tied to packages. This prepares for using a
`Tpl` as a container for expressions.
This does not yet handle the situation of auto-rooting dangling expressions
within the container.
DEV-13708
This delegates expression parsing to `AirExprAggregate`, in an effort to
both begin to simplify the understanding and maintenance of `AirAggregate`;
and allow for parser composition for template parsing.
This utilizes the prior changes for token sum types to precisely define the
subset of AIR tokens supported by the expression parser. This differs from
prior approaches which delegated until a dead state, relying on runtime
information to determine if a parser has finished. This allows us to
determine that statically.
I do want to be able to eliminate the dead state from the parser so we can
get rid of the `unreachable!`, but I need to move on; that's something I had
tried to do in the past too, which ended up adding a bit of complexity, and
I'll have to consider my options in the future, including whether the dead
state transition can be entirely eliminated in favor of the combination of
these sum types and recovery; the parsing framework decisions were made
while recovery was still an open question, at least in practice.
DEV-13708
This sets the stage for template parsing, and finally decides how we're
going to represent templates on the ASG. This is going to start simple,
since my original plans for improving how templates are
handled (conceptually) is going to have to wait.
This is the last difficult object type to figure out, with respect to graph
representation and derivation, so I wanted to get it out of the way.
DEV-13708
I wasn't initially sure whether I'd want separate tokens for different types
of identifying operations, but now that I see that it is clear from the
current state of the parser, there's no need.
This matches the name of the token in NIR.
DEV-13708
The previous commit demonstrated the amount of boilerplate necessary for
introducing new `ObjectKind`s; this abstracts away a lot of that
boilerplate, and allows for declarative relationship definition for the
ASG's ontology.
DEV-13708
There's quite a bit of boilerplate here that'll eventually need factoring
out. But it's also clear that it is somewhat onerous to add new object
types.
Note that a good chunk of this burden is _intentional_, via exhaustiveness
checks---adding a new type of object is an exceptional occurrence (well, in
principle, but we haven't added them all yet, so it'll be more common
initially), and we'd rather be safe to ensure that everything is properly
considering how that new type of object interacts with it.
Let's not confuse coupling with safety---the latter causes a burden because
of the former, not because of itself; it provides a service to us.
But, nonetheless, we'll want to reduce this burden somewhat since there are
a number more to add.
DEV-13708
Just as `rate` is a `sum`, `classify` is an `all` by default. The `@any`
attribute will change that interpretation, though I only intend to recognize
that in parsing later on, not emit that in XMLI.
DEV-13708
The element only, no attributes yet.
I'll keep forming boilerplate until abstraction points become obvious with
more variety; this is still pretty close to what was already supported.
DEV-13708
We already had `TreeContext`, and I'm passing the same arguments around, so
this uses it to lift arguments out of these functions, like partial
application.
DEV-13708
This tidies this method up into a decent state that I'm fairly content
with. This goes to emphasize my dislike of returns, which muddies control
flow and makes the code more difficult to read at a glance, which increase
the likelihood of logic bugs.
`match` statements in tail position, on the other hand, are very clear, and
less cognitively burdensome since you can see each individual code path at a
glance.
DEV-13708
This begins to develop a pattern for doing these transformations. I had
tried a number of things using iterators, but I wasn't satisfied with either
how they were turning out; had to fight too much with the type system; or
had to resort to heap allocations. Sticking with an explicit
`push`/`push_all` for now works just fine.
Almost done cleaning up `AsgTreeToXirf::parse_token`, and then I can move on
to introducing more objects.
DEV-13708
Mike Gerwitz