This enforces the new constraint that templates expanding into an `Expr`
context must only inline a single `Expr`.
Perhaps in the future we'll support explicit splicing, like `,@` in
Lisp. But this new restriction is intended for two purposes:
- To make templates more predictable (if you have a list of expressions
inlined then they will act differently depending on the type of
expression that they are inlined into, which means that more defensive
programming would otherwise be required); and
- To make expansion easier, since we're going to have to set aside an
expansion workspace ahead of time to ensure ordering (Petgraph can't
replace edges in-place). If we support multi-expansion, we'd have to
handle associativity in all expression contexts.
This'll become more clear in future commits.
It's nice to see all this hard work coming together now, though; it's easy
now to perform static analysis on the system, and any part of the graph
construction can throw errors with rich diagnostic information and still
recover properly. And, importantly, the system enforces its own state, and
the compiler helps us with that (the previous commits).
DEV-13163
The fixpoint tests for `meta-interp` are finally working. I could have
broken this up more, but I'm exhausted with this process, so, you get what
you get.
NIR will now recognize basic `<text>` and `<param-value>` nodes (note the
caveat for `<text>` in the comment, for now), and I finally include abstract
binding in the lowering pipeline. `xmli` output is also now able to cope
with metavariables with a single lexical association, and continues to
become more of a mess.
DEV-13163
This is a really obvious problem in retrospect, which makes me feel rather
silly.
The output was useful, but I don't have time to deal with this any further
right now. The comments in the commit explain the problem---that the output
ends up being interpolated as part of the fixpoint test, in an incorrect
context, and so the code that we generate is invalid. Also goes to show why
the fixpoint tests are important.
(Yes, they're still disabled for meta-interp, I'm trying to get them
enabled.)
DEV-13163
This introduces the ability to specify an edge ordering for the ontological
tree traversal. `tree_reconstruction` will now use a
`SourceCompatibleTreeEdgeOrder`, which will traverse the graph in an order
that will result in a properly ordered source reconstruction. This is
needed for template headers, because interpolation causes
metavariables (exposed as template params) to be mixed into the body.
There's a lot of information here, including some TODOs on possible
improvements. I used the unstable `is_sorted` to output how many template
were already sorted, based on one of our very large packages internally that
uses templates extensively, and found that none of the desugared shorthand
template expansions were already ordered. If I tweak that a bit, then
nearly all templates will already be ordered, reducing the work that needs
to be done, leaving only template definitions with interpolation to be
concerned about, which is infrequent relative to everything else.
DEV-13163
Well, this is both good news and bad news.
The good news is that this finally produces the expected output and
reconstructs sources from interpolated values on the ASG. Yay!
...the bad news is that it's wrong. Notice how the fixpoint test is
disabled.
So, my plan was originally to commit it like this first and see if I was
comfortable relaxing the convention that `<param>` nodes had to appear in
the header. That's nice to do, that's cleaner to do, but would the
XSLT-based compiler really care? I had to investigate.
Well, turns out that TAMER does care. Because, well over a decade ago, I
re-used `<param>`, which could represent not only a template param, but also
a global param, or a function param.
So, XML->NIR considers all `<param>` nodes at the head of a template to be
template parameters. But after the first non-header element, we transition
to another state that allows it to be pretty much anything.
And so, I can't relax that restriction.
And because of that, I can't just stream the tree to the xmli generator,
I'll have to queue up nodes and order them.
Oh well, I tried.
DEV-13163
This introduces template/param and regenerates it in the xmli output. Note
that this does not check that applications reference known params; that's a
later phase.
DEV-13163
This introduces `xmlo-experimental` for `--emit`, allowing the new parser to
be toggled selectively for individual packages. This has a few notable
benefits:
1. We'll be able to conditionally compile packages as they are
supported (TAMER will target specific packages in our system to try to
achieve certain results more quickly);
2. This cleans up the code a bit by removing awkward gated logic, allowing
natural abstractions to form; and
3. Removing the compile-time feature flag ensures that the new features
are always built and tested; there are fewer configuration combinations
to test.
DEV-13162
This change requires every package to have a canonical name, and performs
namespec canonicalization on imports.
Since all package names are canonicalized, this opens the door to being able
to index package names at import, allowing the object to be shared on the
graph and properly reference a package after it has been resolved.
Note that the system tests' canonicalization is relative to the hard-coded
`/TODO` presently; that will change in the near future once `tamec`
generates names from the provided path.
DEV-13162
This is needed to then support `@desc` for shorthand desugaring; it's
required by the XSLT-based compiler (and will eventually be required by
TAMER too).
DEV-13708
This introduces a new `Doc` object that can be owned by `Expr` (only atm)
and contain what it describes as a concise independent clause. This
construction is not enforced, and is only really obvious today via the
Summary Pages.
There's a lot of latent and unrealized potential in TAME's documentation
philosophy that was never realized, so this will certainly evolve over
time. But for now, the primary purpose was to get `@desc` working on things
like classifications so that `xmli` output can compile for certain
packages.
DEV-13708
This doesn't do the actual hard work yet of resolving and loading a package,
but it does place it on the graph and re-derive it into the xmli output.
DEV-13708
This introduces `<match on="foo" />` and `<match on="foo" value="bar" />`,
which are both equality predicates. Other types of predicates are not yet
supported.
This change is a bit messy and leaves a bit to be desired. `NirToAir` is
quite messy and needs some cleanup. There's also the issue of introducing
XML-specific errors in NIR so that users know what things like "subject"
mean, but not being able to do so yet because NIR is agnostic to the source
document type; another layer of abstraction is needed.
But, my priority is first to get derivation of a particularly
expensive (generated) package in our internal systems working first.
DEV-13708
This recognizes template application within expressions. Since expressions
can occur within templates, this can occur arbitrarily deeply.
And with that, we have the core of the template system represented on the
graph. Of course, there are some glaring scoping issues to be resolved, but
those aren't unique to template application.
DEV-13708
I had hoped this would be considerably easier to implement, but there are
some confounding factors.
First of all: this accomplishes the initial task of getting nested template
applications and definitions re-output in the `xmli` file. But to do so
successfully, some assumptions had to be made.
The primary issue is that of scope. The old (XSLT-based) TAME relied on the
output JS to handle lexical scope for it at runtime in most situations. In
the case of the template system, when scoping/shadowing were needed, complex
and buggy XPaths were used to make a best effort. The equivalent here would
be a graph traversal, which is not ideal.
I had begun going down the rabbit hole of formalizing lexical scope for
TAMER with environments, but I want to get this committed and working first;
I've been holding onto this and breaking off changes for some time now.
DEV-13708
This represents a significant departure from how the XSLT-based TAME handles
the `@values@` param, but it will end up having the same effect. It builds
upon prior work, utilizing the fact that referencing a template in TAMER
will expand it.
The problem is this: allowing trees in `Meta` would add yet another
container; we have `Pkg` and `Tpl` already. This was the same problem with
template application---I didn't want to add support for binding arguments
separately, and so re-used templates themselves, reaching the generalization
I just mentioned above.
`Meta` is intended to be a lexical metasyntatic variable. That keeps its
implementation quite simple. But if we start allowing trees, that gets
rather complicated really quickly, and starts to require much more complex
AIR parser state.
But we can accomplish the same behavior by desugaring into an existing
container---a template---and placing the body within it. Then, in the
future, we'll parse `param-copy` into a simple `Air::RefIdent`, which will
expand the closed template and produce the same result as it does today in
the XSLT-based system.
This leaves open issues of closure (variable binding) in complex scenarios,
such as in templates that introduce metavariables to be utilized by the
body. That's never a practice I liked, but we'll see how things evolve.
Further, this does not yet handle nested template applications.
But this saved me a ton of work. Desugaring is much simpler.
The question is going to be how the XSLT-based compiler responds to this for
large packages with thousands of template applications. I'll have to see
if it's worth the hit at that time, or if we should inline it when
generating the `xmli` file, producing the same `@values@` as
before. But as it stands at this moment, the output is _not_ compatible
with the current compiler, as it expects `@values@` to be a tree, so a
modification would have to be made there.
DEV-13708
This applies to template application only; there's still some work to do for
template parameters in definitions (well, for deriving them in `xmli` at
least). And, as you can see, there's still a lot of TODO items here.
I ended up backtracking on tree edges to Meta, and even on cross edges to
Meta, because it complicated xmli derivation with no benefit right now;
maybe a cross edge will be re-added in the future, but I need to move on and
see where this takes me.
But, it works.
DEV-13708
This this a big change that's difficult to break up, and I don't have the
energy after it.
This introduces nullary template application, short- and long-form. Note
that a body of the short form is a `@values@` argument, so that's not
supported yet.
This continues to formalize the idea of what "template application" and
"template expansion" mean in TAMER. It makes a separate `TplApply`
unnecessary, because now application is simply a reference to a
template. Expansion and application are one and the same: when a template
expands, it'll re-bind metavariables to the parent context. So in a
template context, this amounts to application.
But applying a closed template will have nothing to bind, and so is
equivalent to expansion. And since `Meta` objects are not valid outside of
a `Tpl` context, applying a non-closed template outside of another template
will be invalid.
So we get all of this with a single primitive (getting the "value" of a
template).
The expansion is conceptually like `,@` in Lisp, where we're splicing trees.
It's a mess in some spots, but I want to get this committed before I do a
little bit of cleanup.
Small break from templates for something easier. I have COVID-19, so I'll
use that as my excuse for wanting to be more lazy.
The real reason is to see some more concrete progress and ensure that
patterns hold for simple expressions before further refactoring.
But, before I proceed with such refactoring, I really ought to approach
something that requires a NIR desugaring step, like case statements.
DEV-13708
Going higher than that doesn't make sense because we're in shell and
invoking commands all around this, so even milliseconds isn't going to be
entirely accurate here. However, what I am more interested in is observing
time relative to other runs; this isn't intended for profiling, but for
eyeballing unexpected behavior.
DEV-13708
There's a lot to look at, especially in the event of failure. Further, I
wanted to add additional statistics that could be eyeballed.
Right now, tamec is too fast (at least on my machine) for the precision of
/usr/bin/time: we need milliseconds, but we only get hundredths of a
second. So it'll all show as 0:00.00s. Which is okay, for now; it just
shouldn't exceed that. ;)
DEV-13708
The intent was to have a very simple implementation of `hold_dangling` and
have everything work. But, I had a nasty surprise when the system tests
caught bug caused by some interesting depth interactions as it relates to
`xmli` and auto-closing.
I added an extra test/example in `asg::graph::visit::test` to illustrate the
situation; it was difficult to derive from the traces, but trivially obvious
once I wrote it out as an example.
With that, templates can now aggregate tokens for dangling expressions.
DEV-13708
This won't try the fixpoint test if the prior one fails, which will always
cause that one to fail. And it further won't attempt the diff on
compilation failure.
DEV-13708
And finally we have tokens aggregated onto the ASG in the context of a
template. I expected to arrive here much more quickly, but there was a lot
of necessary refactoring. There's a lot more that could be done, but I need
to continue; I had wanted this done a week ago.
It is worth noting, though, that this finally achieves something I had been
wondering about since the inception of this project---how I'd represent
templates on the graph. I think this worked out rather nicely. It wasn't
even until a few months ago that I decided to use AIR instead of NIR for
that purpose (NIR wouldn't have worked).
And note how I didn't have to touch the program derivation at all---the
system test just works with the AIR change, because of the consistent
construction of the graph. Beautiful.
DEV-13708
Just as was done with the expression parser, which this will utilize. This
initializes it, but doesn't yet make use of it (`AirExprAggregate`).
Refactoring was definitely needed; decomposing this is quite a bit of work,
in no small part because of the complexity. This helps significantly.
DEV-13708
This sets the stage for template parsing, and finally decides how we're
going to represent templates on the ASG. This is going to start simple,
since my original plans for improving how templates are
handled (conceptually) is going to have to wait.
This is the last difficult object type to figure out, with respect to graph
representation and derivation, so I wanted to get it out of the way.
DEV-13708
Just as `rate` is a `sum`, `classify` is an `all` by default. The `@any`
attribute will change that interpretation, though I only intend to recognize
that in parsing later on, not emit that in XMLI.
DEV-13708
The element only, no attributes yet.
I'll keep forming boilerplate until abstraction points become obvious with
more variety; this is still pretty close to what was already supported.
DEV-13708
This was a fairly simple addition, since rate blocks already lower into sum
expressions; these are just non-identified.
This does emphasize that the nir::parse `ele_parse!` abstraction I spent so
much time on ended up not being a perfect fit, as it now has some
boilerplate after it was stripped of much of its capabilities some time ago.
Don't worry, `nir::air` and `asg::graph::xmli` will get cleaned up.
DEV-13708
This extends the POC a bit by beginning to reconstruct rate blocks (note
that NIR isn't producing sub-expressions yet).
Importantly, this also adds the first system tests, now that we have an
end-to-end system. This not only gives me confidence that the system is
producing the expected output, but serves as a compromise: writing unit or
integration tests for this program derivation would be a great deal of work,
and wouldn't even catch the bugs I'm worried most about; the lowering
operation can be written in such a way as to give me high confidence in its
correctness without those more granular tests, or in conjunction with unit
or integration tests for a smaller portion.
DEV-13708
This provides a test harness for running shell-based system tests. The
first of such tests will be introduced in the following commit.
This is done in place of integration tests written in Rust because it will
invoke the final binary exactly as the user or build system (using TAMER)
will, providing greater confidence. Besides, a lot of things are simply
more convenient to do in shell. ...though some of you may debate that.
DEV-13708
There are a number of reasons for this, where the benefits do not make up
for the losses.
First: this is actually invoking cargo. Not only is this not necessary, but
it's not desirable: cargo by default hits the network and does all sorts of
other stuff, when all we want to do is invoke the executable. So the tests
aren't really testing the right thing in that sense. See the previous
commit for more information.
The way it invokes cargo is different than the way the Makefile invokes
cargo, so on my system, it's actually invoking a _different cargo_! This is
causing problems, in particular with lock files, which causes my tests to
fail.
Importantly, this also removes a _lot_ of dependencies, which removes a lot
of supplier chain risk and a lot of code to audit. This provides
significant security benefits, especially given that what was being tested
was rather small, and could be done in a shell script.
TAMER will receive significant system testing later on. But for now, none
of this was worth it.
Further audits of dependencies will come later on. I've always been fairly
insistent on keeping the dependency graph small and auditable, but recent
supply chain attacks have given me a better way to rationalize the security
risk. Further, I'm the only one on this project right now.
We want to be able to build a representation of the dependency graph so
we can easily inspect it.
We do not want to make GraphML by default. It is better to use a tool.
We use "petgraph-graphml".
Add a stub executable that will eventually become a full-featured TAME
compiler. The first implementation will only copy the source file to an
intermediary file that will be compiled by the XSLT compiler.
We want to add an option to set the output file to the linker so we do
not need to redirect output to awk any longer.
This also adds integration tests for tameld.
Mike Gerwitz
Joseph Frazer