2022-10-19 10:00:08 -04:00
|
|
|
|
// IR that is "near" the source code.
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
//
|
2023-01-17 23:09:25 -05:00
|
|
|
|
// Copyright (C) 2014-2023 Ryan Specialty, LLC.
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
//
|
|
|
|
|
// This file is part of TAME.
|
|
|
|
|
//
|
|
|
|
|
// This program is free software: you can redistribute it and/or modify
|
|
|
|
|
// it under the terms of the GNU General Public License as published by
|
|
|
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
|
|
|
// (at your option) any later version.
|
|
|
|
|
//
|
|
|
|
|
// This program is distributed in the hope that it will be useful,
|
|
|
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
// GNU General Public License for more details.
|
|
|
|
|
//
|
|
|
|
|
// You should have received a copy of the GNU General Public License
|
|
|
|
|
// along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
|
|
2022-09-16 09:59:38 -04:00
|
|
|
|
//! An IR that is "near" the source code.
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
//!
|
|
|
|
|
//! This IR is "near" the source code written by the user,
|
2022-09-16 09:59:38 -04:00
|
|
|
|
//! performing only basic normalization tasks like desugaring.
|
|
|
|
|
//! It takes a verbose input language and translates it into a much more
|
|
|
|
|
//! concise internal representation.
|
|
|
|
|
//! The hope is that most desugaring will be done by templates in the future.
|
|
|
|
|
//!
|
|
|
|
|
//! NIR cannot completely normalize the source input because it does not
|
|
|
|
|
//! have enough information to do so---the
|
|
|
|
|
//! template system requires a compile-time interpreter that is beyond
|
|
|
|
|
//! the capabilities of NIR,
|
|
|
|
|
//! and so a final normalization pass must be done later on in the
|
|
|
|
|
//! lowering pipeline.
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
//!
|
|
|
|
|
//! This is a streaming IR,
|
|
|
|
|
//! meaning that the equivalent AST is not explicitly represented as a
|
|
|
|
|
//! tree structure in memory.
|
|
|
|
|
//!
|
2022-09-16 09:59:38 -04:00
|
|
|
|
//! NIR is lossy and does not retain enough information for code
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
//! formatting---that
|
|
|
|
|
//! type of operation will require a mapping between
|
|
|
|
|
//! XIRF and NIR,
|
|
|
|
|
//! where the latter is used to gather enough context for formatting
|
|
|
|
|
//! and the former is used as a concrete representation of what the user
|
|
|
|
|
//! actually typed.
|
2022-09-19 09:22:07 -04:00
|
|
|
|
//!
|
|
|
|
|
//! For more information on the parser,
|
|
|
|
|
//! see [`parse`].
|
|
|
|
|
//! The entry point for NIR in the lowering pipeline is exported as
|
|
|
|
|
//! [`XirfToNir`].
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
|
2022-12-13 13:34:52 -05:00
|
|
|
|
mod air;
|
tamer: NIR re-simplification
Alright, this has been a rather tortured experience. The previous commit
began to state what is going on.
This is reversing a lot of prior work, with the benefit of
hindsight. Little bit of history, for the people who will probably never
read this, but who knows:
As noted at the top of NIR, I've long wanted a very simple set of general
primitives where all desugaring is done by the template system---TAME is a
metalanguage after all. Therefore, I never intended on having any explicit
desugaring operations.
But I didn't have time to augment the template system to support parsing on
attribute strings (nor am I sure if I want to do such a thing), so it became
clear that interpolation would be a pass in the compiler. Which led me to
the idea of a desugaring pass.
That in turn spiraled into representing the status of whether NIR was
desugared, and separating primitives, etc, which lead to a lot of additional
complexity. The idea was to have a Sugared and Plan NIR, and further within
them have symbols that have latent types---if they require interpolation,
then those types would be deferred until after template expansion.
The obvious problem there is that now:
1. NIR has the complexity of various types; and
2. Types were tightly coupled with NIR and how it was defined in terms of
XML destructuring.
The first attempt at this didn't go well: it was clear that the symbol types
would make mapping from Sugared to Plain NIR very complicated. Further,
since NIR had any number of symbols per Sugared NIR token, interpolation was
a pain in the ass.
So that lead to the idea of interpolating at the _attribute_ level. That
seemed to be going well at first, until I realized that the token stream of
the attribute parser does not match that of the element parser, and so that
general solution fell apart. It wouldn't have been great anyway, since then
interpolation was _also_ coupled to the destructuring of the document.
Another goal of mine has been to decouple TAME from XML. Not because I want
to move away from XML (if I did, I'd want S-expressions, not YAML, but I
don't think the team would go for that). This decoupling would allow the
use of a subset of the syntax of TAME in other places, like CSVMs and YAML
test cases, for example, if appropriate.
This approach makes sense: the grammar of TAME isn't XML, it's _embedded
within_ XML. The XML layer has to be stripped to expose it.
And so that's what NIR is now evolving into---the stripped, bare
repsentation of TAME's language. That also has other benefits too down the
line, like a REPL where you can use any number of syntaxes. I intend for
NIR to be stack-based, which I'd find to be intuitive for manipulating and
querying packages, but it could have any number of grammars, including
Prolog-like for expressing Horn clauses and querying with a
Prolog/Datalog-like syntax. But that's for the future...
The next issue is that of attribute types. If we have a better language for
NIR, then the types can be associated with the NIR tokens, rather than
having to associate each symbol with raw type data, which doesn't make a
whole lot of sense. That also allows for AIR to better infer types and
determine what they ought to be, and further makes checking types after
template application natural, since it's not part of NIR at all. It also
means the template system can naturally apply to any sources.
Now, if we take that final step further, and make attributes streaming
instead of aggregating, we're back to a streaming pipeline where all
aggregation takes place on the ASG (which also resolves the memcpy concerns
worked around previously, also further simplifying `ele_parse` again, though
it sucks that I wasted that time). And, without the symbol types getting
in the way, since now NIR has types more fundamentally associated with
tokens, we're able to interpolate on a token stream using simple SPairs,
like I always hoped (and reverted back to in the previous commit).
Oh, and what about that desugaring pass? There's the issue of how to
represent such a thing in the type system---ideally we'd know statically
that desugaring always lowers into a more primitive NIR that reduces the
mapping that needs to be done to AIR. But that adds complexity, as
mentioned above. The alternative is to just use the templat system, as I
originally wanted to, and resolve shortcomings by augmenting the template
system to be able to handle it. That not only keeps NIR and the compiler
much simpler, but exposes more powerful tools to developers via TAME's
metalanguage, if such a thing is appropriate.
Anyway, this creates a system that's far more intuitive, and far
simpler. It does kick the can to AIR, but that's okay, since it's also
better positioned to deal with it.
Everything I wrote above is a thought dump and has not been proof-read, so
good luck! And lets hope this finally works out...it's actually feeling
good this time. The journey was necessary to discover and justify what came
out of it---everything I'm stripping away was like a cocoon, and within it
is a more beautiful and more elegant TAME.
DEV-13346
2022-11-28 13:35:10 -05:00
|
|
|
|
mod interp;
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
mod parse;
|
|
|
|
|
|
|
|
|
|
use crate::{
|
|
|
|
|
diagnose::{Annotate, Diagnostic},
|
tamer: f::Functor: New trait
This commit is purposefully coupled with changes that utilize it to
demonstrate that the need for this abstraction has been _derived_, not
forced; TAMER doesn't aim to be functional for the sake of it, since
idiomatic Rust achieves many of its benefits without the formalisms.
But, the formalisms do occasionally help, and this is one such
example. There is other existing code that can be refactored to take
advantage of this style as well.
I do _not_ wish to pull an existing functional dependency into TAMER; I want
to keep these abstractions light, and eliminate them as necessary, as Rust
continues to integrate new features into its core. I also want to be able
to modify the abstractions to suit our particular needs. (This is _not_ a
general recommendation; it's particular to TAMER and to my experience.)
This implementation of `Functor` is one such example. While it is modeled
after Haskell in that it provides `fmap`, the primitive here is instead
`map`, with `fmap` derived from it, since `map` allows for better use of
Rust idioms. Furthermore, it's polymorphic over _trait_ type parameters,
not method, allowing for separate trait impls for different container types,
which can in turn be inferred by Rust and allow for some very concise
mapping; this is particularly important for TAMER because of the disciplined
use of newtypes.
For example, `foo.overwrite(span)` and `foo.overwrite(name)` are both
self-documenting, and better alternatives than, say, `foo.map_span(|_|
span)` and `foo.map_symbol(|_| name)`; the latter are perfectly clear in
what they do, but lack a layer of abstraction, and are verbose. But the
clarity of the _new_ form does rely on either good naming conventions of
arguments, or explicit type annotations using turbofish notation if
necessary.
This will be implemented on core Rust types as appropriate and as
possible. At the time of writing, we do not yet have trait specialization,
and there's too many soundness issues for me to be comfortable enabling it,
so that limits that we can do with something like, say, a generic `Result`,
while also allowing for specialized implementations based on newtypes.
DEV-13160
2023-01-04 12:30:18 -05:00
|
|
|
|
f::Functor,
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
fmt::{DisplayWrapper, TtQuote},
|
tamer: xir::parse::ele::ele_parse!: Integrate `attr_parse_stream!`
This handles the bulk of the integration of the new `attr_parse_stream!` as
a replacement for `attr_parse!`, which moves from aggregate attribute
objects to a stream of attribute-derived tokens. Rationale for this change
is in the preceding commit messages.
The first striking change here is how it affects the test cases: nearly all
`Incomplete`s are removed. Note that the parser has an existing
optimization whereby `Incomplete` with lookahead causes immediate recursion
within `Parser`, since those situations are used only for control flow and
to keep recursion out of `ParseState`s.
Next: this removes types from `nir::parse`'s grammar for attributes. The
types will instead be derived from NIR tokens later in the lowering
pipeline. This simplifies NIR considerably, since adding types into the mix
at this point was taking an already really complex lowering phase and making
it ever more difficult to reason about and get everything working together
the way that I needed.
Because of `attr_parse_stream!`, there are no more required attribute
checks. Those will be handled later in the lowering pipeline, if they're
actually needed in context, with possibly one exception: namespace
declarations. Those are really part of the document and they ought to be
handled _earlier_ in the pipeline; I'll do that at some point. It's not
required for compilation; it's just required to maintain compliance with the
XML spec.
We also lose checks for duplicate attributes. This is also something that
ought to be handled at the document level, and so earlier in the pipeline,
since XML cares, not us---if we get a duplicate attribute that results in an
extra NIR token, then the next parser will error out, since it has to check
for those things anyway.
A bunch of cleanup and simplification is still needed; I want to get the
initial integration committed first. It's a shame I'm getting rid of so
much work, but this is the right approach, and results in a much simpler
system.
DEV-13346
2022-11-30 23:52:18 -05:00
|
|
|
|
parse::{util::SPair, Object, Token},
|
2022-09-19 16:21:41 -04:00
|
|
|
|
span::{Span, UNKNOWN_SPAN},
|
2022-11-05 00:08:50 -04:00
|
|
|
|
sym::SymbolId,
|
tamer: nir: Detect interpolated values
This simply detects whether a value will need to be further parsed for
interpolation; it does not yet perform the parsing itself, which will happen
during desugaring.
This introduces a performance regression, for an interesting reason. I
found that introducing a single new variant to `SugaredNir` (with a
`(SymbolId, Span)` pair), was causing the width of the `NirParseState` type
to increase just enough to cause Rust to be unable to optimize away a
significant number of memcpys related to `Parser` moves, and consequently
reducing performance by nearly 50% for `tamec`. Yikes.
I suspected this would be a problem, and indeed have tried in all other
cases to avoid aggregation until the ASG---the problem is that I had wanted
to aggregate attributes for NIR so that the IR could actually make some
progress toward simplifying the stream (and therefore working with the
data), and be able to validate against a grammar defined in a single
place. The problem is that the `NirParseState` type contains a sum type for
every attribute parser, and is therefore as wide as the largest one. That
is what Rust is having trouble optimizing memcpy away for.
Indeed, reducing the number of attributes improves the situation
drastically. However, it doesn't make it go away entirely.
If you look at a callgrind profile for `tameld` (or a dissassembly), you'll
notice that I put quite a bit of effort into ensuring that the hot code path
for the lowering pipeline contains _no_ memcpys for the parsers. But that
is not the case with `tamec`---I had to move on. But I do still have the
same escape hatch that I introduced for `tameld`, which is the mutable
`Context`.
It seems that may be the solution there too, but I want to get a bit further
along first to see how these data end up propagating before I go through
that somewhat significant effort.
DEV-13156
2022-11-01 14:30:34 -04:00
|
|
|
|
xir::{
|
|
|
|
|
attr::{Attr, AttrSpan},
|
|
|
|
|
fmt::TtXmlAttr,
|
|
|
|
|
QName,
|
|
|
|
|
},
|
|
|
|
|
};
|
|
|
|
|
use std::{
|
|
|
|
|
convert::Infallible,
|
|
|
|
|
error::Error,
|
|
|
|
|
fmt::{Debug, Display},
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
};
|
|
|
|
|
|
2022-12-13 13:34:52 -05:00
|
|
|
|
pub use air::{NirToAir, NirToAirError};
|
2022-12-05 16:32:00 -05:00
|
|
|
|
pub use interp::{InterpError, InterpState as InterpolateNir};
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
pub use parse::{
|
|
|
|
|
NirParseState as XirfToNir, NirParseStateError_ as XirfToNirError,
|
|
|
|
|
};
|
|
|
|
|
|
tamer: NIR re-simplification
Alright, this has been a rather tortured experience. The previous commit
began to state what is going on.
This is reversing a lot of prior work, with the benefit of
hindsight. Little bit of history, for the people who will probably never
read this, but who knows:
As noted at the top of NIR, I've long wanted a very simple set of general
primitives where all desugaring is done by the template system---TAME is a
metalanguage after all. Therefore, I never intended on having any explicit
desugaring operations.
But I didn't have time to augment the template system to support parsing on
attribute strings (nor am I sure if I want to do such a thing), so it became
clear that interpolation would be a pass in the compiler. Which led me to
the idea of a desugaring pass.
That in turn spiraled into representing the status of whether NIR was
desugared, and separating primitives, etc, which lead to a lot of additional
complexity. The idea was to have a Sugared and Plan NIR, and further within
them have symbols that have latent types---if they require interpolation,
then those types would be deferred until after template expansion.
The obvious problem there is that now:
1. NIR has the complexity of various types; and
2. Types were tightly coupled with NIR and how it was defined in terms of
XML destructuring.
The first attempt at this didn't go well: it was clear that the symbol types
would make mapping from Sugared to Plain NIR very complicated. Further,
since NIR had any number of symbols per Sugared NIR token, interpolation was
a pain in the ass.
So that lead to the idea of interpolating at the _attribute_ level. That
seemed to be going well at first, until I realized that the token stream of
the attribute parser does not match that of the element parser, and so that
general solution fell apart. It wouldn't have been great anyway, since then
interpolation was _also_ coupled to the destructuring of the document.
Another goal of mine has been to decouple TAME from XML. Not because I want
to move away from XML (if I did, I'd want S-expressions, not YAML, but I
don't think the team would go for that). This decoupling would allow the
use of a subset of the syntax of TAME in other places, like CSVMs and YAML
test cases, for example, if appropriate.
This approach makes sense: the grammar of TAME isn't XML, it's _embedded
within_ XML. The XML layer has to be stripped to expose it.
And so that's what NIR is now evolving into---the stripped, bare
repsentation of TAME's language. That also has other benefits too down the
line, like a REPL where you can use any number of syntaxes. I intend for
NIR to be stack-based, which I'd find to be intuitive for manipulating and
querying packages, but it could have any number of grammars, including
Prolog-like for expressing Horn clauses and querying with a
Prolog/Datalog-like syntax. But that's for the future...
The next issue is that of attribute types. If we have a better language for
NIR, then the types can be associated with the NIR tokens, rather than
having to associate each symbol with raw type data, which doesn't make a
whole lot of sense. That also allows for AIR to better infer types and
determine what they ought to be, and further makes checking types after
template application natural, since it's not part of NIR at all. It also
means the template system can naturally apply to any sources.
Now, if we take that final step further, and make attributes streaming
instead of aggregating, we're back to a streaming pipeline where all
aggregation takes place on the ASG (which also resolves the memcpy concerns
worked around previously, also further simplifying `ele_parse` again, though
it sucks that I wasted that time). And, without the symbol types getting
in the way, since now NIR has types more fundamentally associated with
tokens, we're able to interpolate on a token stream using simple SPairs,
like I always hoped (and reverted back to in the previous commit).
Oh, and what about that desugaring pass? There's the issue of how to
represent such a thing in the type system---ideally we'd know statically
that desugaring always lowers into a more primitive NIR that reduces the
mapping that needs to be done to AIR. But that adds complexity, as
mentioned above. The alternative is to just use the templat system, as I
originally wanted to, and resolve shortcomings by augmenting the template
system to be able to handle it. That not only keeps NIR and the compiler
much simpler, but exposes more powerful tools to developers via TAME's
metalanguage, if such a thing is appropriate.
Anyway, this creates a system that's far more intuitive, and far
simpler. It does kick the can to AIR, but that's okay, since it's also
better positioned to deal with it.
Everything I wrote above is a thought dump and has not been proof-read, so
good luck! And lets hope this finally works out...it's actually feeling
good this time. The journey was necessary to discover and justify what came
out of it---everything I'm stripping away was like a cocoon, and within it
is a more beautiful and more elegant TAME.
DEV-13346
2022-11-28 13:35:10 -05:00
|
|
|
|
/// IR that is "near" the source code.
|
2022-10-19 10:00:08 -04:00
|
|
|
|
///
|
tamer: NIR re-simplification
Alright, this has been a rather tortured experience. The previous commit
began to state what is going on.
This is reversing a lot of prior work, with the benefit of
hindsight. Little bit of history, for the people who will probably never
read this, but who knows:
As noted at the top of NIR, I've long wanted a very simple set of general
primitives where all desugaring is done by the template system---TAME is a
metalanguage after all. Therefore, I never intended on having any explicit
desugaring operations.
But I didn't have time to augment the template system to support parsing on
attribute strings (nor am I sure if I want to do such a thing), so it became
clear that interpolation would be a pass in the compiler. Which led me to
the idea of a desugaring pass.
That in turn spiraled into representing the status of whether NIR was
desugared, and separating primitives, etc, which lead to a lot of additional
complexity. The idea was to have a Sugared and Plan NIR, and further within
them have symbols that have latent types---if they require interpolation,
then those types would be deferred until after template expansion.
The obvious problem there is that now:
1. NIR has the complexity of various types; and
2. Types were tightly coupled with NIR and how it was defined in terms of
XML destructuring.
The first attempt at this didn't go well: it was clear that the symbol types
would make mapping from Sugared to Plain NIR very complicated. Further,
since NIR had any number of symbols per Sugared NIR token, interpolation was
a pain in the ass.
So that lead to the idea of interpolating at the _attribute_ level. That
seemed to be going well at first, until I realized that the token stream of
the attribute parser does not match that of the element parser, and so that
general solution fell apart. It wouldn't have been great anyway, since then
interpolation was _also_ coupled to the destructuring of the document.
Another goal of mine has been to decouple TAME from XML. Not because I want
to move away from XML (if I did, I'd want S-expressions, not YAML, but I
don't think the team would go for that). This decoupling would allow the
use of a subset of the syntax of TAME in other places, like CSVMs and YAML
test cases, for example, if appropriate.
This approach makes sense: the grammar of TAME isn't XML, it's _embedded
within_ XML. The XML layer has to be stripped to expose it.
And so that's what NIR is now evolving into---the stripped, bare
repsentation of TAME's language. That also has other benefits too down the
line, like a REPL where you can use any number of syntaxes. I intend for
NIR to be stack-based, which I'd find to be intuitive for manipulating and
querying packages, but it could have any number of grammars, including
Prolog-like for expressing Horn clauses and querying with a
Prolog/Datalog-like syntax. But that's for the future...
The next issue is that of attribute types. If we have a better language for
NIR, then the types can be associated with the NIR tokens, rather than
having to associate each symbol with raw type data, which doesn't make a
whole lot of sense. That also allows for AIR to better infer types and
determine what they ought to be, and further makes checking types after
template application natural, since it's not part of NIR at all. It also
means the template system can naturally apply to any sources.
Now, if we take that final step further, and make attributes streaming
instead of aggregating, we're back to a streaming pipeline where all
aggregation takes place on the ASG (which also resolves the memcpy concerns
worked around previously, also further simplifying `ele_parse` again, though
it sucks that I wasted that time). And, without the symbol types getting
in the way, since now NIR has types more fundamentally associated with
tokens, we're able to interpolate on a token stream using simple SPairs,
like I always hoped (and reverted back to in the previous commit).
Oh, and what about that desugaring pass? There's the issue of how to
represent such a thing in the type system---ideally we'd know statically
that desugaring always lowers into a more primitive NIR that reduces the
mapping that needs to be done to AIR. But that adds complexity, as
mentioned above. The alternative is to just use the templat system, as I
originally wanted to, and resolve shortcomings by augmenting the template
system to be able to handle it. That not only keeps NIR and the compiler
much simpler, but exposes more powerful tools to developers via TAME's
metalanguage, if such a thing is appropriate.
Anyway, this creates a system that's far more intuitive, and far
simpler. It does kick the can to AIR, but that's okay, since it's also
better positioned to deal with it.
Everything I wrote above is a thought dump and has not been proof-read, so
good luck! And lets hope this finally works out...it's actually feeling
good this time. The journey was necessary to discover and justify what came
out of it---everything I'm stripping away was like a cocoon, and within it
is a more beautiful and more elegant TAME.
DEV-13346
2022-11-28 13:35:10 -05:00
|
|
|
|
/// This represents the language of TAME after it has been extracted from
|
|
|
|
|
/// whatever document encloses it
|
|
|
|
|
/// (e.g. XML).
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
#[derive(Debug, PartialEq, Eq)]
|
tamer: NIR re-simplification
Alright, this has been a rather tortured experience. The previous commit
began to state what is going on.
This is reversing a lot of prior work, with the benefit of
hindsight. Little bit of history, for the people who will probably never
read this, but who knows:
As noted at the top of NIR, I've long wanted a very simple set of general
primitives where all desugaring is done by the template system---TAME is a
metalanguage after all. Therefore, I never intended on having any explicit
desugaring operations.
But I didn't have time to augment the template system to support parsing on
attribute strings (nor am I sure if I want to do such a thing), so it became
clear that interpolation would be a pass in the compiler. Which led me to
the idea of a desugaring pass.
That in turn spiraled into representing the status of whether NIR was
desugared, and separating primitives, etc, which lead to a lot of additional
complexity. The idea was to have a Sugared and Plan NIR, and further within
them have symbols that have latent types---if they require interpolation,
then those types would be deferred until after template expansion.
The obvious problem there is that now:
1. NIR has the complexity of various types; and
2. Types were tightly coupled with NIR and how it was defined in terms of
XML destructuring.
The first attempt at this didn't go well: it was clear that the symbol types
would make mapping from Sugared to Plain NIR very complicated. Further,
since NIR had any number of symbols per Sugared NIR token, interpolation was
a pain in the ass.
So that lead to the idea of interpolating at the _attribute_ level. That
seemed to be going well at first, until I realized that the token stream of
the attribute parser does not match that of the element parser, and so that
general solution fell apart. It wouldn't have been great anyway, since then
interpolation was _also_ coupled to the destructuring of the document.
Another goal of mine has been to decouple TAME from XML. Not because I want
to move away from XML (if I did, I'd want S-expressions, not YAML, but I
don't think the team would go for that). This decoupling would allow the
use of a subset of the syntax of TAME in other places, like CSVMs and YAML
test cases, for example, if appropriate.
This approach makes sense: the grammar of TAME isn't XML, it's _embedded
within_ XML. The XML layer has to be stripped to expose it.
And so that's what NIR is now evolving into---the stripped, bare
repsentation of TAME's language. That also has other benefits too down the
line, like a REPL where you can use any number of syntaxes. I intend for
NIR to be stack-based, which I'd find to be intuitive for manipulating and
querying packages, but it could have any number of grammars, including
Prolog-like for expressing Horn clauses and querying with a
Prolog/Datalog-like syntax. But that's for the future...
The next issue is that of attribute types. If we have a better language for
NIR, then the types can be associated with the NIR tokens, rather than
having to associate each symbol with raw type data, which doesn't make a
whole lot of sense. That also allows for AIR to better infer types and
determine what they ought to be, and further makes checking types after
template application natural, since it's not part of NIR at all. It also
means the template system can naturally apply to any sources.
Now, if we take that final step further, and make attributes streaming
instead of aggregating, we're back to a streaming pipeline where all
aggregation takes place on the ASG (which also resolves the memcpy concerns
worked around previously, also further simplifying `ele_parse` again, though
it sucks that I wasted that time). And, without the symbol types getting
in the way, since now NIR has types more fundamentally associated with
tokens, we're able to interpolate on a token stream using simple SPairs,
like I always hoped (and reverted back to in the previous commit).
Oh, and what about that desugaring pass? There's the issue of how to
represent such a thing in the type system---ideally we'd know statically
that desugaring always lowers into a more primitive NIR that reduces the
mapping that needs to be done to AIR. But that adds complexity, as
mentioned above. The alternative is to just use the templat system, as I
originally wanted to, and resolve shortcomings by augmenting the template
system to be able to handle it. That not only keeps NIR and the compiler
much simpler, but exposes more powerful tools to developers via TAME's
metalanguage, if such a thing is appropriate.
Anyway, this creates a system that's far more intuitive, and far
simpler. It does kick the can to AIR, but that's okay, since it's also
better positioned to deal with it.
Everything I wrote above is a thought dump and has not been proof-read, so
good luck! And lets hope this finally works out...it's actually feeling
good this time. The journey was necessary to discover and justify what came
out of it---everything I'm stripping away was like a cocoon, and within it
is a more beautiful and more elegant TAME.
DEV-13346
2022-11-28 13:35:10 -05:00
|
|
|
|
pub enum Nir {
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
Todo,
|
tamer: xir::parse::ele::ele_parse!: Integrate `attr_parse_stream!`
This handles the bulk of the integration of the new `attr_parse_stream!` as
a replacement for `attr_parse!`, which moves from aggregate attribute
objects to a stream of attribute-derived tokens. Rationale for this change
is in the preceding commit messages.
The first striking change here is how it affects the test cases: nearly all
`Incomplete`s are removed. Note that the parser has an existing
optimization whereby `Incomplete` with lookahead causes immediate recursion
within `Parser`, since those situations are used only for control flow and
to keep recursion out of `ParseState`s.
Next: this removes types from `nir::parse`'s grammar for attributes. The
types will instead be derived from NIR tokens later in the lowering
pipeline. This simplifies NIR considerably, since adding types into the mix
at this point was taking an already really complex lowering phase and making
it ever more difficult to reason about and get everything working together
the way that I needed.
Because of `attr_parse_stream!`, there are no more required attribute
checks. Those will be handled later in the lowering pipeline, if they're
actually needed in context, with possibly one exception: namespace
declarations. Those are really part of the document and they ought to be
handled _earlier_ in the pipeline; I'll do that at some point. It's not
required for compilation; it's just required to maintain compliance with the
XML spec.
We also lose checks for duplicate attributes. This is also something that
ought to be handled at the document level, and so earlier in the pipeline,
since XML cares, not us---if we get a duplicate attribute that results in an
extra NIR token, then the next parser will error out, since it has to check
for those things anyway.
A bunch of cleanup and simplification is still needed; I want to get the
initial integration committed first. It's a shame I'm getting rid of so
much work, but this is the right approach, and results in a much simpler
system.
DEV-13346
2022-11-30 23:52:18 -05:00
|
|
|
|
TodoAttr(SPair),
|
2022-11-05 00:08:50 -04:00
|
|
|
|
|
2022-12-02 00:15:31 -05:00
|
|
|
|
/// Begin the definition of some [`NirEntity`] and place it atop of the
|
|
|
|
|
/// stack.
|
|
|
|
|
Open(NirEntity, Span),
|
|
|
|
|
|
|
|
|
|
/// Finish definition of a [`NirEntity`] atop of the stack and pop it.
|
2023-01-30 16:51:24 -05:00
|
|
|
|
Close(NirEntity, Span),
|
2022-12-02 00:15:31 -05:00
|
|
|
|
|
|
|
|
|
/// Bind the given name as an identifier for the entity atop of the
|
|
|
|
|
/// stack.
|
|
|
|
|
BindIdent(SPair),
|
|
|
|
|
|
|
|
|
|
/// Reference the value of the given identifier.
|
|
|
|
|
///
|
|
|
|
|
/// Permissible identifiers and values depend on the context in which
|
|
|
|
|
/// this appears.
|
|
|
|
|
Ref(SPair),
|
|
|
|
|
|
|
|
|
|
/// Describe the [`NirEntity`] atop of the stack.
|
|
|
|
|
Desc(SPair),
|
|
|
|
|
|
|
|
|
|
/// A string literal.
|
|
|
|
|
///
|
|
|
|
|
/// The meaning of this string depends on context.
|
|
|
|
|
/// For example,
|
|
|
|
|
/// it may represent literate documentation or a literal in a
|
|
|
|
|
/// metavariable definition.
|
|
|
|
|
Text(SPair),
|
|
|
|
|
}
|
|
|
|
|
|
2022-12-05 16:32:00 -05:00
|
|
|
|
impl Nir {
|
|
|
|
|
/// Retrieve inner [`SymbolId`] that this token represents,
|
|
|
|
|
/// if any.
|
|
|
|
|
///
|
|
|
|
|
/// Not all NIR tokens contain associated symbols;
|
|
|
|
|
/// a token's [`SymbolId`] is retained only if it provides additional
|
|
|
|
|
/// information over the token itself.
|
|
|
|
|
///
|
|
|
|
|
/// See also [`Nir::map`] if you wish to change the symbol.
|
|
|
|
|
pub fn symbol(&self) -> Option<SymbolId> {
|
|
|
|
|
use Nir::*;
|
|
|
|
|
|
|
|
|
|
match self {
|
|
|
|
|
Todo => None,
|
|
|
|
|
TodoAttr(spair) => Some(spair.symbol()),
|
|
|
|
|
|
2023-01-30 16:51:24 -05:00
|
|
|
|
Open(_, _) | Close(_, _) => None,
|
2022-12-05 16:32:00 -05:00
|
|
|
|
|
|
|
|
|
BindIdent(spair) | Ref(spair) | Desc(spair) | Text(spair) => {
|
|
|
|
|
Some(spair.symbol())
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
tamer: f::Functor: New trait
This commit is purposefully coupled with changes that utilize it to
demonstrate that the need for this abstraction has been _derived_, not
forced; TAMER doesn't aim to be functional for the sake of it, since
idiomatic Rust achieves many of its benefits without the formalisms.
But, the formalisms do occasionally help, and this is one such
example. There is other existing code that can be refactored to take
advantage of this style as well.
I do _not_ wish to pull an existing functional dependency into TAMER; I want
to keep these abstractions light, and eliminate them as necessary, as Rust
continues to integrate new features into its core. I also want to be able
to modify the abstractions to suit our particular needs. (This is _not_ a
general recommendation; it's particular to TAMER and to my experience.)
This implementation of `Functor` is one such example. While it is modeled
after Haskell in that it provides `fmap`, the primitive here is instead
`map`, with `fmap` derived from it, since `map` allows for better use of
Rust idioms. Furthermore, it's polymorphic over _trait_ type parameters,
not method, allowing for separate trait impls for different container types,
which can in turn be inferred by Rust and allow for some very concise
mapping; this is particularly important for TAMER because of the disciplined
use of newtypes.
For example, `foo.overwrite(span)` and `foo.overwrite(name)` are both
self-documenting, and better alternatives than, say, `foo.map_span(|_|
span)` and `foo.map_symbol(|_| name)`; the latter are perfectly clear in
what they do, but lack a layer of abstraction, and are verbose. But the
clarity of the _new_ form does rely on either good naming conventions of
arguments, or explicit type annotations using turbofish notation if
necessary.
This will be implemented on core Rust types as appropriate and as
possible. At the time of writing, we do not yet have trait specialization,
and there's too many soundness issues for me to be comfortable enabling it,
so that limits that we can do with something like, say, a generic `Result`,
while also allowing for specialized implementations based on newtypes.
DEV-13160
2023-01-04 12:30:18 -05:00
|
|
|
|
}
|
2022-12-05 16:32:00 -05:00
|
|
|
|
|
tamer: f::Functor: New trait
This commit is purposefully coupled with changes that utilize it to
demonstrate that the need for this abstraction has been _derived_, not
forced; TAMER doesn't aim to be functional for the sake of it, since
idiomatic Rust achieves many of its benefits without the formalisms.
But, the formalisms do occasionally help, and this is one such
example. There is other existing code that can be refactored to take
advantage of this style as well.
I do _not_ wish to pull an existing functional dependency into TAMER; I want
to keep these abstractions light, and eliminate them as necessary, as Rust
continues to integrate new features into its core. I also want to be able
to modify the abstractions to suit our particular needs. (This is _not_ a
general recommendation; it's particular to TAMER and to my experience.)
This implementation of `Functor` is one such example. While it is modeled
after Haskell in that it provides `fmap`, the primitive here is instead
`map`, with `fmap` derived from it, since `map` allows for better use of
Rust idioms. Furthermore, it's polymorphic over _trait_ type parameters,
not method, allowing for separate trait impls for different container types,
which can in turn be inferred by Rust and allow for some very concise
mapping; this is particularly important for TAMER because of the disciplined
use of newtypes.
For example, `foo.overwrite(span)` and `foo.overwrite(name)` are both
self-documenting, and better alternatives than, say, `foo.map_span(|_|
span)` and `foo.map_symbol(|_| name)`; the latter are perfectly clear in
what they do, but lack a layer of abstraction, and are verbose. But the
clarity of the _new_ form does rely on either good naming conventions of
arguments, or explicit type annotations using turbofish notation if
necessary.
This will be implemented on core Rust types as appropriate and as
possible. At the time of writing, we do not yet have trait specialization,
and there's too many soundness issues for me to be comfortable enabling it,
so that limits that we can do with something like, say, a generic `Result`,
while also allowing for specialized implementations based on newtypes.
DEV-13160
2023-01-04 12:30:18 -05:00
|
|
|
|
impl Functor<SymbolId> for Nir {
|
2022-12-05 16:32:00 -05:00
|
|
|
|
/// Map over a token's [`SymbolId`].
|
|
|
|
|
///
|
|
|
|
|
/// This allows modifying a token's [`SymbolId`] while retaining the
|
|
|
|
|
/// associated [`Span`].
|
|
|
|
|
/// This is the desired behavior when modifying the source code the user
|
|
|
|
|
/// entered,
|
|
|
|
|
/// since diagnostic messages will reference the original source
|
|
|
|
|
/// location that the modification was derived from.
|
|
|
|
|
///
|
|
|
|
|
/// If a token does not contain a symbol,
|
|
|
|
|
/// this returns the token unchanged.
|
|
|
|
|
///
|
|
|
|
|
/// See also [`Nir::symbol`] if you only wish to retrieve the symbol
|
|
|
|
|
/// rather than map over it.
|
tamer: f::Functor: New trait
This commit is purposefully coupled with changes that utilize it to
demonstrate that the need for this abstraction has been _derived_, not
forced; TAMER doesn't aim to be functional for the sake of it, since
idiomatic Rust achieves many of its benefits without the formalisms.
But, the formalisms do occasionally help, and this is one such
example. There is other existing code that can be refactored to take
advantage of this style as well.
I do _not_ wish to pull an existing functional dependency into TAMER; I want
to keep these abstractions light, and eliminate them as necessary, as Rust
continues to integrate new features into its core. I also want to be able
to modify the abstractions to suit our particular needs. (This is _not_ a
general recommendation; it's particular to TAMER and to my experience.)
This implementation of `Functor` is one such example. While it is modeled
after Haskell in that it provides `fmap`, the primitive here is instead
`map`, with `fmap` derived from it, since `map` allows for better use of
Rust idioms. Furthermore, it's polymorphic over _trait_ type parameters,
not method, allowing for separate trait impls for different container types,
which can in turn be inferred by Rust and allow for some very concise
mapping; this is particularly important for TAMER because of the disciplined
use of newtypes.
For example, `foo.overwrite(span)` and `foo.overwrite(name)` are both
self-documenting, and better alternatives than, say, `foo.map_span(|_|
span)` and `foo.map_symbol(|_| name)`; the latter are perfectly clear in
what they do, but lack a layer of abstraction, and are verbose. But the
clarity of the _new_ form does rely on either good naming conventions of
arguments, or explicit type annotations using turbofish notation if
necessary.
This will be implemented on core Rust types as appropriate and as
possible. At the time of writing, we do not yet have trait specialization,
and there's too many soundness issues for me to be comfortable enabling it,
so that limits that we can do with something like, say, a generic `Result`,
while also allowing for specialized implementations based on newtypes.
DEV-13160
2023-01-04 12:30:18 -05:00
|
|
|
|
fn map(self, f: impl FnOnce(SymbolId) -> SymbolId) -> Self {
|
2022-12-05 16:32:00 -05:00
|
|
|
|
use Nir::*;
|
|
|
|
|
|
|
|
|
|
match self {
|
|
|
|
|
Todo => self,
|
|
|
|
|
TodoAttr(spair) => TodoAttr(spair.map(f)),
|
|
|
|
|
|
2023-01-30 16:51:24 -05:00
|
|
|
|
Open(_, _) | Close(_, _) => self,
|
2022-12-05 16:32:00 -05:00
|
|
|
|
|
|
|
|
|
BindIdent(spair) => BindIdent(spair.map(f)),
|
|
|
|
|
Ref(spair) => Ref(spair.map(f)),
|
|
|
|
|
Desc(spair) => Desc(spair.map(f)),
|
|
|
|
|
Text(spair) => Text(spair.map(f)),
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2022-12-02 00:15:31 -05:00
|
|
|
|
/// An object upon which other [`Nir`] tokens act.
|
|
|
|
|
#[derive(Debug, PartialEq, Eq)]
|
|
|
|
|
pub enum NirEntity {
|
2023-01-30 16:51:24 -05:00
|
|
|
|
/// Package of identifiers.
|
|
|
|
|
Package,
|
|
|
|
|
|
2023-01-23 16:30:25 -05:00
|
|
|
|
/// Rate (verb) block,
|
|
|
|
|
/// representing a calculation with a scalar result.
|
|
|
|
|
Rate,
|
|
|
|
|
|
2023-02-22 23:45:23 -05:00
|
|
|
|
/// Summation (Σ) expression.
|
|
|
|
|
Sum,
|
|
|
|
|
|
2022-12-02 00:15:31 -05:00
|
|
|
|
/// Template parameter (metavariable).
|
|
|
|
|
TplParam,
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
}
|
|
|
|
|
|
2023-01-23 16:30:25 -05:00
|
|
|
|
impl NirEntity {
|
|
|
|
|
pub fn open<S: Into<Span>>(self, span: S) -> Nir {
|
|
|
|
|
Nir::Open(self, span.into())
|
|
|
|
|
}
|
2023-01-30 16:51:24 -05:00
|
|
|
|
|
|
|
|
|
pub fn close<S: Into<Span>>(self, span: S) -> Nir {
|
|
|
|
|
Nir::Close(self, span.into())
|
|
|
|
|
}
|
2023-01-23 16:30:25 -05:00
|
|
|
|
}
|
|
|
|
|
|
2022-12-02 00:15:31 -05:00
|
|
|
|
impl Display for NirEntity {
|
|
|
|
|
fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
|
|
|
|
|
use NirEntity::*;
|
|
|
|
|
|
|
|
|
|
match self {
|
2023-01-30 16:51:24 -05:00
|
|
|
|
Package => write!(f, "package"),
|
2023-01-23 16:30:25 -05:00
|
|
|
|
Rate => write!(f, "rate block"),
|
2023-02-22 23:45:23 -05:00
|
|
|
|
Sum => write!(f, "sum expression"),
|
2022-12-02 00:15:31 -05:00
|
|
|
|
TplParam => write!(f, "template param (metavariable)"),
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
2022-11-05 00:08:50 -04:00
|
|
|
|
|
tamer: NIR re-simplification
Alright, this has been a rather tortured experience. The previous commit
began to state what is going on.
This is reversing a lot of prior work, with the benefit of
hindsight. Little bit of history, for the people who will probably never
read this, but who knows:
As noted at the top of NIR, I've long wanted a very simple set of general
primitives where all desugaring is done by the template system---TAME is a
metalanguage after all. Therefore, I never intended on having any explicit
desugaring operations.
But I didn't have time to augment the template system to support parsing on
attribute strings (nor am I sure if I want to do such a thing), so it became
clear that interpolation would be a pass in the compiler. Which led me to
the idea of a desugaring pass.
That in turn spiraled into representing the status of whether NIR was
desugared, and separating primitives, etc, which lead to a lot of additional
complexity. The idea was to have a Sugared and Plan NIR, and further within
them have symbols that have latent types---if they require interpolation,
then those types would be deferred until after template expansion.
The obvious problem there is that now:
1. NIR has the complexity of various types; and
2. Types were tightly coupled with NIR and how it was defined in terms of
XML destructuring.
The first attempt at this didn't go well: it was clear that the symbol types
would make mapping from Sugared to Plain NIR very complicated. Further,
since NIR had any number of symbols per Sugared NIR token, interpolation was
a pain in the ass.
So that lead to the idea of interpolating at the _attribute_ level. That
seemed to be going well at first, until I realized that the token stream of
the attribute parser does not match that of the element parser, and so that
general solution fell apart. It wouldn't have been great anyway, since then
interpolation was _also_ coupled to the destructuring of the document.
Another goal of mine has been to decouple TAME from XML. Not because I want
to move away from XML (if I did, I'd want S-expressions, not YAML, but I
don't think the team would go for that). This decoupling would allow the
use of a subset of the syntax of TAME in other places, like CSVMs and YAML
test cases, for example, if appropriate.
This approach makes sense: the grammar of TAME isn't XML, it's _embedded
within_ XML. The XML layer has to be stripped to expose it.
And so that's what NIR is now evolving into---the stripped, bare
repsentation of TAME's language. That also has other benefits too down the
line, like a REPL where you can use any number of syntaxes. I intend for
NIR to be stack-based, which I'd find to be intuitive for manipulating and
querying packages, but it could have any number of grammars, including
Prolog-like for expressing Horn clauses and querying with a
Prolog/Datalog-like syntax. But that's for the future...
The next issue is that of attribute types. If we have a better language for
NIR, then the types can be associated with the NIR tokens, rather than
having to associate each symbol with raw type data, which doesn't make a
whole lot of sense. That also allows for AIR to better infer types and
determine what they ought to be, and further makes checking types after
template application natural, since it's not part of NIR at all. It also
means the template system can naturally apply to any sources.
Now, if we take that final step further, and make attributes streaming
instead of aggregating, we're back to a streaming pipeline where all
aggregation takes place on the ASG (which also resolves the memcpy concerns
worked around previously, also further simplifying `ele_parse` again, though
it sucks that I wasted that time). And, without the symbol types getting
in the way, since now NIR has types more fundamentally associated with
tokens, we're able to interpolate on a token stream using simple SPairs,
like I always hoped (and reverted back to in the previous commit).
Oh, and what about that desugaring pass? There's the issue of how to
represent such a thing in the type system---ideally we'd know statically
that desugaring always lowers into a more primitive NIR that reduces the
mapping that needs to be done to AIR. But that adds complexity, as
mentioned above. The alternative is to just use the templat system, as I
originally wanted to, and resolve shortcomings by augmenting the template
system to be able to handle it. That not only keeps NIR and the compiler
much simpler, but exposes more powerful tools to developers via TAME's
metalanguage, if such a thing is appropriate.
Anyway, this creates a system that's far more intuitive, and far
simpler. It does kick the can to AIR, but that's okay, since it's also
better positioned to deal with it.
Everything I wrote above is a thought dump and has not been proof-read, so
good luck! And lets hope this finally works out...it's actually feeling
good this time. The journey was necessary to discover and justify what came
out of it---everything I'm stripping away was like a cocoon, and within it
is a more beautiful and more elegant TAME.
DEV-13346
2022-11-28 13:35:10 -05:00
|
|
|
|
impl Token for Nir {
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
fn ir_name() -> &'static str {
|
2022-10-19 10:00:08 -04:00
|
|
|
|
"Plain NIR"
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
}
|
|
|
|
|
|
2022-11-05 00:08:50 -04:00
|
|
|
|
/// Identifying span of a token.
|
|
|
|
|
///
|
|
|
|
|
/// An _identifying span_ is a selection of one of the (potentially
|
|
|
|
|
/// many) spans associated with a token that is most likely to be
|
|
|
|
|
/// associated with the identity of that token.
|
2022-10-19 10:00:08 -04:00
|
|
|
|
fn span(&self) -> Span {
|
tamer: NIR re-simplification
Alright, this has been a rather tortured experience. The previous commit
began to state what is going on.
This is reversing a lot of prior work, with the benefit of
hindsight. Little bit of history, for the people who will probably never
read this, but who knows:
As noted at the top of NIR, I've long wanted a very simple set of general
primitives where all desugaring is done by the template system---TAME is a
metalanguage after all. Therefore, I never intended on having any explicit
desugaring operations.
But I didn't have time to augment the template system to support parsing on
attribute strings (nor am I sure if I want to do such a thing), so it became
clear that interpolation would be a pass in the compiler. Which led me to
the idea of a desugaring pass.
That in turn spiraled into representing the status of whether NIR was
desugared, and separating primitives, etc, which lead to a lot of additional
complexity. The idea was to have a Sugared and Plan NIR, and further within
them have symbols that have latent types---if they require interpolation,
then those types would be deferred until after template expansion.
The obvious problem there is that now:
1. NIR has the complexity of various types; and
2. Types were tightly coupled with NIR and how it was defined in terms of
XML destructuring.
The first attempt at this didn't go well: it was clear that the symbol types
would make mapping from Sugared to Plain NIR very complicated. Further,
since NIR had any number of symbols per Sugared NIR token, interpolation was
a pain in the ass.
So that lead to the idea of interpolating at the _attribute_ level. That
seemed to be going well at first, until I realized that the token stream of
the attribute parser does not match that of the element parser, and so that
general solution fell apart. It wouldn't have been great anyway, since then
interpolation was _also_ coupled to the destructuring of the document.
Another goal of mine has been to decouple TAME from XML. Not because I want
to move away from XML (if I did, I'd want S-expressions, not YAML, but I
don't think the team would go for that). This decoupling would allow the
use of a subset of the syntax of TAME in other places, like CSVMs and YAML
test cases, for example, if appropriate.
This approach makes sense: the grammar of TAME isn't XML, it's _embedded
within_ XML. The XML layer has to be stripped to expose it.
And so that's what NIR is now evolving into---the stripped, bare
repsentation of TAME's language. That also has other benefits too down the
line, like a REPL where you can use any number of syntaxes. I intend for
NIR to be stack-based, which I'd find to be intuitive for manipulating and
querying packages, but it could have any number of grammars, including
Prolog-like for expressing Horn clauses and querying with a
Prolog/Datalog-like syntax. But that's for the future...
The next issue is that of attribute types. If we have a better language for
NIR, then the types can be associated with the NIR tokens, rather than
having to associate each symbol with raw type data, which doesn't make a
whole lot of sense. That also allows for AIR to better infer types and
determine what they ought to be, and further makes checking types after
template application natural, since it's not part of NIR at all. It also
means the template system can naturally apply to any sources.
Now, if we take that final step further, and make attributes streaming
instead of aggregating, we're back to a streaming pipeline where all
aggregation takes place on the ASG (which also resolves the memcpy concerns
worked around previously, also further simplifying `ele_parse` again, though
it sucks that I wasted that time). And, without the symbol types getting
in the way, since now NIR has types more fundamentally associated with
tokens, we're able to interpolate on a token stream using simple SPairs,
like I always hoped (and reverted back to in the previous commit).
Oh, and what about that desugaring pass? There's the issue of how to
represent such a thing in the type system---ideally we'd know statically
that desugaring always lowers into a more primitive NIR that reduces the
mapping that needs to be done to AIR. But that adds complexity, as
mentioned above. The alternative is to just use the templat system, as I
originally wanted to, and resolve shortcomings by augmenting the template
system to be able to handle it. That not only keeps NIR and the compiler
much simpler, but exposes more powerful tools to developers via TAME's
metalanguage, if such a thing is appropriate.
Anyway, this creates a system that's far more intuitive, and far
simpler. It does kick the can to AIR, but that's okay, since it's also
better positioned to deal with it.
Everything I wrote above is a thought dump and has not been proof-read, so
good luck! And lets hope this finally works out...it's actually feeling
good this time. The journey was necessary to discover and justify what came
out of it---everything I'm stripping away was like a cocoon, and within it
is a more beautiful and more elegant TAME.
DEV-13346
2022-11-28 13:35:10 -05:00
|
|
|
|
use Nir::*;
|
2022-09-19 16:21:41 -04:00
|
|
|
|
|
|
|
|
|
match self {
|
|
|
|
|
Todo => UNKNOWN_SPAN,
|
2022-12-02 00:15:31 -05:00
|
|
|
|
TodoAttr(spair) => spair.span(),
|
|
|
|
|
|
|
|
|
|
Open(_, span) => *span,
|
2023-01-30 16:51:24 -05:00
|
|
|
|
Close(_, span) => *span,
|
2022-12-02 00:15:31 -05:00
|
|
|
|
|
|
|
|
|
BindIdent(spair) | Ref(spair) | Desc(spair) | Text(spair) => {
|
|
|
|
|
spair.span()
|
|
|
|
|
}
|
2022-09-19 16:21:41 -04:00
|
|
|
|
}
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
tamer: NIR re-simplification
Alright, this has been a rather tortured experience. The previous commit
began to state what is going on.
This is reversing a lot of prior work, with the benefit of
hindsight. Little bit of history, for the people who will probably never
read this, but who knows:
As noted at the top of NIR, I've long wanted a very simple set of general
primitives where all desugaring is done by the template system---TAME is a
metalanguage after all. Therefore, I never intended on having any explicit
desugaring operations.
But I didn't have time to augment the template system to support parsing on
attribute strings (nor am I sure if I want to do such a thing), so it became
clear that interpolation would be a pass in the compiler. Which led me to
the idea of a desugaring pass.
That in turn spiraled into representing the status of whether NIR was
desugared, and separating primitives, etc, which lead to a lot of additional
complexity. The idea was to have a Sugared and Plan NIR, and further within
them have symbols that have latent types---if they require interpolation,
then those types would be deferred until after template expansion.
The obvious problem there is that now:
1. NIR has the complexity of various types; and
2. Types were tightly coupled with NIR and how it was defined in terms of
XML destructuring.
The first attempt at this didn't go well: it was clear that the symbol types
would make mapping from Sugared to Plain NIR very complicated. Further,
since NIR had any number of symbols per Sugared NIR token, interpolation was
a pain in the ass.
So that lead to the idea of interpolating at the _attribute_ level. That
seemed to be going well at first, until I realized that the token stream of
the attribute parser does not match that of the element parser, and so that
general solution fell apart. It wouldn't have been great anyway, since then
interpolation was _also_ coupled to the destructuring of the document.
Another goal of mine has been to decouple TAME from XML. Not because I want
to move away from XML (if I did, I'd want S-expressions, not YAML, but I
don't think the team would go for that). This decoupling would allow the
use of a subset of the syntax of TAME in other places, like CSVMs and YAML
test cases, for example, if appropriate.
This approach makes sense: the grammar of TAME isn't XML, it's _embedded
within_ XML. The XML layer has to be stripped to expose it.
And so that's what NIR is now evolving into---the stripped, bare
repsentation of TAME's language. That also has other benefits too down the
line, like a REPL where you can use any number of syntaxes. I intend for
NIR to be stack-based, which I'd find to be intuitive for manipulating and
querying packages, but it could have any number of grammars, including
Prolog-like for expressing Horn clauses and querying with a
Prolog/Datalog-like syntax. But that's for the future...
The next issue is that of attribute types. If we have a better language for
NIR, then the types can be associated with the NIR tokens, rather than
having to associate each symbol with raw type data, which doesn't make a
whole lot of sense. That also allows for AIR to better infer types and
determine what they ought to be, and further makes checking types after
template application natural, since it's not part of NIR at all. It also
means the template system can naturally apply to any sources.
Now, if we take that final step further, and make attributes streaming
instead of aggregating, we're back to a streaming pipeline where all
aggregation takes place on the ASG (which also resolves the memcpy concerns
worked around previously, also further simplifying `ele_parse` again, though
it sucks that I wasted that time). And, without the symbol types getting
in the way, since now NIR has types more fundamentally associated with
tokens, we're able to interpolate on a token stream using simple SPairs,
like I always hoped (and reverted back to in the previous commit).
Oh, and what about that desugaring pass? There's the issue of how to
represent such a thing in the type system---ideally we'd know statically
that desugaring always lowers into a more primitive NIR that reduces the
mapping that needs to be done to AIR. But that adds complexity, as
mentioned above. The alternative is to just use the templat system, as I
originally wanted to, and resolve shortcomings by augmenting the template
system to be able to handle it. That not only keeps NIR and the compiler
much simpler, but exposes more powerful tools to developers via TAME's
metalanguage, if such a thing is appropriate.
Anyway, this creates a system that's far more intuitive, and far
simpler. It does kick the can to AIR, but that's okay, since it's also
better positioned to deal with it.
Everything I wrote above is a thought dump and has not been proof-read, so
good luck! And lets hope this finally works out...it's actually feeling
good this time. The journey was necessary to discover and justify what came
out of it---everything I'm stripping away was like a cocoon, and within it
is a more beautiful and more elegant TAME.
DEV-13346
2022-11-28 13:35:10 -05:00
|
|
|
|
impl Object for Nir {}
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
|
tamer: NIR re-simplification
Alright, this has been a rather tortured experience. The previous commit
began to state what is going on.
This is reversing a lot of prior work, with the benefit of
hindsight. Little bit of history, for the people who will probably never
read this, but who knows:
As noted at the top of NIR, I've long wanted a very simple set of general
primitives where all desugaring is done by the template system---TAME is a
metalanguage after all. Therefore, I never intended on having any explicit
desugaring operations.
But I didn't have time to augment the template system to support parsing on
attribute strings (nor am I sure if I want to do such a thing), so it became
clear that interpolation would be a pass in the compiler. Which led me to
the idea of a desugaring pass.
That in turn spiraled into representing the status of whether NIR was
desugared, and separating primitives, etc, which lead to a lot of additional
complexity. The idea was to have a Sugared and Plan NIR, and further within
them have symbols that have latent types---if they require interpolation,
then those types would be deferred until after template expansion.
The obvious problem there is that now:
1. NIR has the complexity of various types; and
2. Types were tightly coupled with NIR and how it was defined in terms of
XML destructuring.
The first attempt at this didn't go well: it was clear that the symbol types
would make mapping from Sugared to Plain NIR very complicated. Further,
since NIR had any number of symbols per Sugared NIR token, interpolation was
a pain in the ass.
So that lead to the idea of interpolating at the _attribute_ level. That
seemed to be going well at first, until I realized that the token stream of
the attribute parser does not match that of the element parser, and so that
general solution fell apart. It wouldn't have been great anyway, since then
interpolation was _also_ coupled to the destructuring of the document.
Another goal of mine has been to decouple TAME from XML. Not because I want
to move away from XML (if I did, I'd want S-expressions, not YAML, but I
don't think the team would go for that). This decoupling would allow the
use of a subset of the syntax of TAME in other places, like CSVMs and YAML
test cases, for example, if appropriate.
This approach makes sense: the grammar of TAME isn't XML, it's _embedded
within_ XML. The XML layer has to be stripped to expose it.
And so that's what NIR is now evolving into---the stripped, bare
repsentation of TAME's language. That also has other benefits too down the
line, like a REPL where you can use any number of syntaxes. I intend for
NIR to be stack-based, which I'd find to be intuitive for manipulating and
querying packages, but it could have any number of grammars, including
Prolog-like for expressing Horn clauses and querying with a
Prolog/Datalog-like syntax. But that's for the future...
The next issue is that of attribute types. If we have a better language for
NIR, then the types can be associated with the NIR tokens, rather than
having to associate each symbol with raw type data, which doesn't make a
whole lot of sense. That also allows for AIR to better infer types and
determine what they ought to be, and further makes checking types after
template application natural, since it's not part of NIR at all. It also
means the template system can naturally apply to any sources.
Now, if we take that final step further, and make attributes streaming
instead of aggregating, we're back to a streaming pipeline where all
aggregation takes place on the ASG (which also resolves the memcpy concerns
worked around previously, also further simplifying `ele_parse` again, though
it sucks that I wasted that time). And, without the symbol types getting
in the way, since now NIR has types more fundamentally associated with
tokens, we're able to interpolate on a token stream using simple SPairs,
like I always hoped (and reverted back to in the previous commit).
Oh, and what about that desugaring pass? There's the issue of how to
represent such a thing in the type system---ideally we'd know statically
that desugaring always lowers into a more primitive NIR that reduces the
mapping that needs to be done to AIR. But that adds complexity, as
mentioned above. The alternative is to just use the templat system, as I
originally wanted to, and resolve shortcomings by augmenting the template
system to be able to handle it. That not only keeps NIR and the compiler
much simpler, but exposes more powerful tools to developers via TAME's
metalanguage, if such a thing is appropriate.
Anyway, this creates a system that's far more intuitive, and far
simpler. It does kick the can to AIR, but that's okay, since it's also
better positioned to deal with it.
Everything I wrote above is a thought dump and has not been proof-read, so
good luck! And lets hope this finally works out...it's actually feeling
good this time. The journey was necessary to discover and justify what came
out of it---everything I'm stripping away was like a cocoon, and within it
is a more beautiful and more elegant TAME.
DEV-13346
2022-11-28 13:35:10 -05:00
|
|
|
|
impl Display for Nir {
|
2022-09-19 16:21:41 -04:00
|
|
|
|
fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
|
tamer: NIR re-simplification
Alright, this has been a rather tortured experience. The previous commit
began to state what is going on.
This is reversing a lot of prior work, with the benefit of
hindsight. Little bit of history, for the people who will probably never
read this, but who knows:
As noted at the top of NIR, I've long wanted a very simple set of general
primitives where all desugaring is done by the template system---TAME is a
metalanguage after all. Therefore, I never intended on having any explicit
desugaring operations.
But I didn't have time to augment the template system to support parsing on
attribute strings (nor am I sure if I want to do such a thing), so it became
clear that interpolation would be a pass in the compiler. Which led me to
the idea of a desugaring pass.
That in turn spiraled into representing the status of whether NIR was
desugared, and separating primitives, etc, which lead to a lot of additional
complexity. The idea was to have a Sugared and Plan NIR, and further within
them have symbols that have latent types---if they require interpolation,
then those types would be deferred until after template expansion.
The obvious problem there is that now:
1. NIR has the complexity of various types; and
2. Types were tightly coupled with NIR and how it was defined in terms of
XML destructuring.
The first attempt at this didn't go well: it was clear that the symbol types
would make mapping from Sugared to Plain NIR very complicated. Further,
since NIR had any number of symbols per Sugared NIR token, interpolation was
a pain in the ass.
So that lead to the idea of interpolating at the _attribute_ level. That
seemed to be going well at first, until I realized that the token stream of
the attribute parser does not match that of the element parser, and so that
general solution fell apart. It wouldn't have been great anyway, since then
interpolation was _also_ coupled to the destructuring of the document.
Another goal of mine has been to decouple TAME from XML. Not because I want
to move away from XML (if I did, I'd want S-expressions, not YAML, but I
don't think the team would go for that). This decoupling would allow the
use of a subset of the syntax of TAME in other places, like CSVMs and YAML
test cases, for example, if appropriate.
This approach makes sense: the grammar of TAME isn't XML, it's _embedded
within_ XML. The XML layer has to be stripped to expose it.
And so that's what NIR is now evolving into---the stripped, bare
repsentation of TAME's language. That also has other benefits too down the
line, like a REPL where you can use any number of syntaxes. I intend for
NIR to be stack-based, which I'd find to be intuitive for manipulating and
querying packages, but it could have any number of grammars, including
Prolog-like for expressing Horn clauses and querying with a
Prolog/Datalog-like syntax. But that's for the future...
The next issue is that of attribute types. If we have a better language for
NIR, then the types can be associated with the NIR tokens, rather than
having to associate each symbol with raw type data, which doesn't make a
whole lot of sense. That also allows for AIR to better infer types and
determine what they ought to be, and further makes checking types after
template application natural, since it's not part of NIR at all. It also
means the template system can naturally apply to any sources.
Now, if we take that final step further, and make attributes streaming
instead of aggregating, we're back to a streaming pipeline where all
aggregation takes place on the ASG (which also resolves the memcpy concerns
worked around previously, also further simplifying `ele_parse` again, though
it sucks that I wasted that time). And, without the symbol types getting
in the way, since now NIR has types more fundamentally associated with
tokens, we're able to interpolate on a token stream using simple SPairs,
like I always hoped (and reverted back to in the previous commit).
Oh, and what about that desugaring pass? There's the issue of how to
represent such a thing in the type system---ideally we'd know statically
that desugaring always lowers into a more primitive NIR that reduces the
mapping that needs to be done to AIR. But that adds complexity, as
mentioned above. The alternative is to just use the templat system, as I
originally wanted to, and resolve shortcomings by augmenting the template
system to be able to handle it. That not only keeps NIR and the compiler
much simpler, but exposes more powerful tools to developers via TAME's
metalanguage, if such a thing is appropriate.
Anyway, this creates a system that's far more intuitive, and far
simpler. It does kick the can to AIR, but that's okay, since it's also
better positioned to deal with it.
Everything I wrote above is a thought dump and has not been proof-read, so
good luck! And lets hope this finally works out...it's actually feeling
good this time. The journey was necessary to discover and justify what came
out of it---everything I'm stripping away was like a cocoon, and within it
is a more beautiful and more elegant TAME.
DEV-13346
2022-11-28 13:35:10 -05:00
|
|
|
|
use Nir::*;
|
2022-09-19 16:21:41 -04:00
|
|
|
|
|
|
|
|
|
match self {
|
|
|
|
|
Todo => write!(f, "TODO"),
|
2022-12-02 00:15:31 -05:00
|
|
|
|
TodoAttr(spair) => write!(f, "TODO Attr {spair}"),
|
|
|
|
|
|
|
|
|
|
Open(entity, _) => write!(f, "open {entity} entity"),
|
2023-01-30 16:51:24 -05:00
|
|
|
|
Close(entity, _) => write!(f, "close {entity} entity"),
|
2022-12-02 00:15:31 -05:00
|
|
|
|
BindIdent(spair) => {
|
|
|
|
|
write!(f, "bind identifier {}", TtQuote::wrap(spair))
|
2022-11-05 00:08:50 -04:00
|
|
|
|
}
|
2022-12-02 00:15:31 -05:00
|
|
|
|
Ref(spair) => write!(f, "ref {}", TtQuote::wrap(spair)),
|
|
|
|
|
|
|
|
|
|
// TODO: TtQuote doesn't yet escape quotes at the time of writing!
|
|
|
|
|
Desc(spair) => write!(f, "description {}", TtQuote::wrap(spair)),
|
|
|
|
|
|
|
|
|
|
// TODO: Not yet safe to output arbitrary text;
|
|
|
|
|
// need to determine how to handle newlines and other types of
|
|
|
|
|
// output.
|
|
|
|
|
Text(_) => write!(f, "text"),
|
2022-09-19 16:21:41 -04:00
|
|
|
|
}
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
tamer: Integrate clippy
This invokes clippy as part of `make check` now, which I had previously
avoided doing (I'll elaborate on that below).
This commit represents the changes needed to resolve all the warnings
presented by clippy. Many changes have been made where I find the lints to
be useful and agreeable, but there are a number of lints, rationalized in
`src/lib.rs`, where I found the lints to be disagreeable. I have provided
rationale, primarily for those wondering why I desire to deviate from the
default lints, though it does feel backward to rationalize why certain lints
ought to be applied (the reverse should be true).
With that said, this did catch some legitimage issues, and it was also
helpful in getting some older code up-to-date with new language additions
that perhaps I used in new code but hadn't gone back and updated old code
for. My goal was to get clippy working without errors so that, in the
future, when others get into TAMER and are still getting used to Rust,
clippy is able to help guide them in the right direction.
One of the reasons I went without clippy for so long (though I admittedly
forgot I wasn't using it for a period of time) was because there were a
number of suggestions that I found disagreeable, and I didn't take the time
to go through them and determine what I wanted to follow. Furthermore, it
was hard to make that judgment when I was new to the language and lacked
the necessary experience to do so.
One thing I would like to comment further on is the use of `format!` with
`expect`, which is also what the diagnostic system convenience methods
do (which clippy does not cover). Because of all the work I've done trying
to understand Rust and looking at disassemblies and seeing what it
optimizes, I falsely assumed that Rust would convert such things into
conditionals in my otherwise-pure code...but apparently that's not the case,
when `format!` is involved.
I noticed that, after making the suggested fix with `get_ident`, Rust
proceeded to then inline it into each call site and then apply further
optimizations. It was also previously invoking the thread lock (for the
interner) unconditionally and invoking the `Display` implementation. That
is not at all what I intended for, despite knowing the eager semantics of
function calls in Rust.
Anyway, possibly more to come on that, I'm just tired of typing and need to
move on. I'll be returning to investigate further diagnostic messages soon.
2023-01-12 10:46:48 -05:00
|
|
|
|
impl<E> From<Nir> for Result<Nir, E> {
|
|
|
|
|
fn from(val: Nir) -> Self {
|
|
|
|
|
Ok(val)
|
tamer: xir::parse::ele::ele_parse!: Integrate `attr_parse_stream!`
This handles the bulk of the integration of the new `attr_parse_stream!` as
a replacement for `attr_parse!`, which moves from aggregate attribute
objects to a stream of attribute-derived tokens. Rationale for this change
is in the preceding commit messages.
The first striking change here is how it affects the test cases: nearly all
`Incomplete`s are removed. Note that the parser has an existing
optimization whereby `Incomplete` with lookahead causes immediate recursion
within `Parser`, since those situations are used only for control flow and
to keep recursion out of `ParseState`s.
Next: this removes types from `nir::parse`'s grammar for attributes. The
types will instead be derived from NIR tokens later in the lowering
pipeline. This simplifies NIR considerably, since adding types into the mix
at this point was taking an already really complex lowering phase and making
it ever more difficult to reason about and get everything working together
the way that I needed.
Because of `attr_parse_stream!`, there are no more required attribute
checks. Those will be handled later in the lowering pipeline, if they're
actually needed in context, with possibly one exception: namespace
declarations. Those are really part of the document and they ought to be
handled _earlier_ in the pipeline; I'll do that at some point. It's not
required for compilation; it's just required to maintain compliance with the
XML spec.
We also lose checks for duplicate attributes. This is also something that
ought to be handled at the document level, and so earlier in the pipeline,
since XML cares, not us---if we get a duplicate attribute that results in an
extra NIR token, then the next parser will error out, since it has to check
for those things anyway.
A bunch of cleanup and simplification is still needed; I want to get the
initial integration committed first. It's a shame I'm getting rid of so
much work, but this is the right approach, and results in a much simpler
system.
DEV-13346
2022-11-30 23:52:18 -05:00
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
tamer: nir: Detect interpolated values
This simply detects whether a value will need to be further parsed for
interpolation; it does not yet perform the parsing itself, which will happen
during desugaring.
This introduces a performance regression, for an interesting reason. I
found that introducing a single new variant to `SugaredNir` (with a
`(SymbolId, Span)` pair), was causing the width of the `NirParseState` type
to increase just enough to cause Rust to be unable to optimize away a
significant number of memcpys related to `Parser` moves, and consequently
reducing performance by nearly 50% for `tamec`. Yikes.
I suspected this would be a problem, and indeed have tried in all other
cases to avoid aggregation until the ASG---the problem is that I had wanted
to aggregate attributes for NIR so that the IR could actually make some
progress toward simplifying the stream (and therefore working with the
data), and be able to validate against a grammar defined in a single
place. The problem is that the `NirParseState` type contains a sum type for
every attribute parser, and is therefore as wide as the largest one. That
is what Rust is having trouble optimizing memcpy away for.
Indeed, reducing the number of attributes improves the situation
drastically. However, it doesn't make it go away entirely.
If you look at a callgrind profile for `tameld` (or a dissassembly), you'll
notice that I put quite a bit of effort into ensuring that the hot code path
for the lowering pipeline contains _no_ memcpys for the parsers. But that
is not the case with `tamec`---I had to move on. But I do still have the
same escape hatch that I introduced for `tameld`, which is the mutable
`Context`.
It seems that may be the solution there too, but I want to get a bit further
along first to see how these data end up propagating before I go through
that somewhat significant effort.
DEV-13156
2022-11-01 14:30:34 -04:00
|
|
|
|
/// Tag representing the type of a NIR value.
|
|
|
|
|
///
|
|
|
|
|
/// NIR values originate from attributes,
|
|
|
|
|
/// which are refined into types as enough information becomes available.
|
|
|
|
|
/// Value parsing must be deferred if a value requires desugaring or
|
|
|
|
|
/// metavalue expansion.
|
|
|
|
|
#[derive(Debug, PartialEq, Eq)]
|
|
|
|
|
#[repr(u8)]
|
|
|
|
|
pub enum NirSymbolTy {
|
|
|
|
|
AnyIdent,
|
|
|
|
|
BooleanLiteral,
|
|
|
|
|
ClassIdent,
|
|
|
|
|
ClassIdentList,
|
|
|
|
|
ConstIdent,
|
|
|
|
|
DescLiteral,
|
|
|
|
|
Dim,
|
|
|
|
|
DynNodeLiteral,
|
|
|
|
|
FuncIdent,
|
|
|
|
|
IdentDtype,
|
|
|
|
|
IdentType,
|
|
|
|
|
MapTransformLiteral,
|
|
|
|
|
NumLiteral,
|
|
|
|
|
ParamDefault,
|
|
|
|
|
ParamIdent,
|
|
|
|
|
ParamName,
|
|
|
|
|
ParamType,
|
|
|
|
|
PkgPath,
|
|
|
|
|
ShortDimNumLiteral,
|
|
|
|
|
StringLiteral,
|
|
|
|
|
SymbolTableKey,
|
|
|
|
|
TexMathLiteral,
|
|
|
|
|
Title,
|
|
|
|
|
TplMetaIdent,
|
2022-11-01 16:23:51 -04:00
|
|
|
|
TplIdent,
|
tamer: nir: Detect interpolated values
This simply detects whether a value will need to be further parsed for
interpolation; it does not yet perform the parsing itself, which will happen
during desugaring.
This introduces a performance regression, for an interesting reason. I
found that introducing a single new variant to `SugaredNir` (with a
`(SymbolId, Span)` pair), was causing the width of the `NirParseState` type
to increase just enough to cause Rust to be unable to optimize away a
significant number of memcpys related to `Parser` moves, and consequently
reducing performance by nearly 50% for `tamec`. Yikes.
I suspected this would be a problem, and indeed have tried in all other
cases to avoid aggregation until the ASG---the problem is that I had wanted
to aggregate attributes for NIR so that the IR could actually make some
progress toward simplifying the stream (and therefore working with the
data), and be able to validate against a grammar defined in a single
place. The problem is that the `NirParseState` type contains a sum type for
every attribute parser, and is therefore as wide as the largest one. That
is what Rust is having trouble optimizing memcpy away for.
Indeed, reducing the number of attributes improves the situation
drastically. However, it doesn't make it go away entirely.
If you look at a callgrind profile for `tameld` (or a dissassembly), you'll
notice that I put quite a bit of effort into ensuring that the hot code path
for the lowering pipeline contains _no_ memcpys for the parsers. But that
is not the case with `tamec`---I had to move on. But I do still have the
same escape hatch that I introduced for `tameld`, which is the mutable
`Context`.
It seems that may be the solution there too, but I want to get a bit further
along first to see how these data end up propagating before I go through
that somewhat significant effort.
DEV-13156
2022-11-01 14:30:34 -04:00
|
|
|
|
TplParamIdent,
|
|
|
|
|
TypeIdent,
|
|
|
|
|
ValueIdent,
|
|
|
|
|
}
|
|
|
|
|
|
2022-11-01 16:23:51 -04:00
|
|
|
|
impl Display for NirSymbolTy {
|
|
|
|
|
fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
|
|
|
|
|
use NirSymbolTy::*;
|
|
|
|
|
|
|
|
|
|
match self {
|
|
|
|
|
AnyIdent => write!(f, "any identifier"),
|
|
|
|
|
BooleanLiteral => write!(
|
|
|
|
|
f,
|
|
|
|
|
"boolean literal {fmt_true} or {fmt_false}",
|
|
|
|
|
fmt_true = TtQuote::wrap("true"),
|
|
|
|
|
fmt_false = TtQuote::wrap("false"),
|
|
|
|
|
),
|
|
|
|
|
ClassIdent => write!(f, "classification identifier"),
|
|
|
|
|
ClassIdentList => {
|
|
|
|
|
write!(f, "space-delimited list of classification identifiers")
|
|
|
|
|
}
|
|
|
|
|
ConstIdent => write!(f, "constant identifier"),
|
|
|
|
|
DescLiteral => write!(f, "description literal"),
|
|
|
|
|
Dim => write!(f, "dimension declaration"),
|
|
|
|
|
DynNodeLiteral => write!(f, "dynamic node literal"),
|
|
|
|
|
FuncIdent => write!(f, "function identifier"),
|
|
|
|
|
IdentDtype => write!(f, "identifier primitive datatype"),
|
|
|
|
|
IdentType => write!(f, "identifier type"),
|
|
|
|
|
MapTransformLiteral => write!(f, "map transformation literal"),
|
|
|
|
|
NumLiteral => write!(f, "numeric literal"),
|
|
|
|
|
ParamDefault => write!(f, "param default"),
|
|
|
|
|
ParamIdent => write!(f, "param identifier"),
|
|
|
|
|
ParamName => write!(f, "param name"),
|
|
|
|
|
ParamType => write!(f, "param type"),
|
|
|
|
|
PkgPath => write!(f, "package path"),
|
|
|
|
|
ShortDimNumLiteral => {
|
|
|
|
|
write!(f, "short-hand dimensionalized numeric literal")
|
|
|
|
|
}
|
|
|
|
|
StringLiteral => write!(f, "string literal"),
|
|
|
|
|
SymbolTableKey => write!(f, "symbol table key name"),
|
|
|
|
|
TexMathLiteral => write!(f, "TeX math literal"),
|
|
|
|
|
Title => write!(f, "title"),
|
|
|
|
|
TplMetaIdent => write!(f, "template metadata identifier"),
|
|
|
|
|
TplIdent => write!(f, "template name"),
|
|
|
|
|
TplParamIdent => write!(f, "template param identifier"),
|
|
|
|
|
TypeIdent => write!(f, "type identifier"),
|
|
|
|
|
ValueIdent => write!(f, "value identifier"),
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
tamer: NIR re-simplification
Alright, this has been a rather tortured experience. The previous commit
began to state what is going on.
This is reversing a lot of prior work, with the benefit of
hindsight. Little bit of history, for the people who will probably never
read this, but who knows:
As noted at the top of NIR, I've long wanted a very simple set of general
primitives where all desugaring is done by the template system---TAME is a
metalanguage after all. Therefore, I never intended on having any explicit
desugaring operations.
But I didn't have time to augment the template system to support parsing on
attribute strings (nor am I sure if I want to do such a thing), so it became
clear that interpolation would be a pass in the compiler. Which led me to
the idea of a desugaring pass.
That in turn spiraled into representing the status of whether NIR was
desugared, and separating primitives, etc, which lead to a lot of additional
complexity. The idea was to have a Sugared and Plan NIR, and further within
them have symbols that have latent types---if they require interpolation,
then those types would be deferred until after template expansion.
The obvious problem there is that now:
1. NIR has the complexity of various types; and
2. Types were tightly coupled with NIR and how it was defined in terms of
XML destructuring.
The first attempt at this didn't go well: it was clear that the symbol types
would make mapping from Sugared to Plain NIR very complicated. Further,
since NIR had any number of symbols per Sugared NIR token, interpolation was
a pain in the ass.
So that lead to the idea of interpolating at the _attribute_ level. That
seemed to be going well at first, until I realized that the token stream of
the attribute parser does not match that of the element parser, and so that
general solution fell apart. It wouldn't have been great anyway, since then
interpolation was _also_ coupled to the destructuring of the document.
Another goal of mine has been to decouple TAME from XML. Not because I want
to move away from XML (if I did, I'd want S-expressions, not YAML, but I
don't think the team would go for that). This decoupling would allow the
use of a subset of the syntax of TAME in other places, like CSVMs and YAML
test cases, for example, if appropriate.
This approach makes sense: the grammar of TAME isn't XML, it's _embedded
within_ XML. The XML layer has to be stripped to expose it.
And so that's what NIR is now evolving into---the stripped, bare
repsentation of TAME's language. That also has other benefits too down the
line, like a REPL where you can use any number of syntaxes. I intend for
NIR to be stack-based, which I'd find to be intuitive for manipulating and
querying packages, but it could have any number of grammars, including
Prolog-like for expressing Horn clauses and querying with a
Prolog/Datalog-like syntax. But that's for the future...
The next issue is that of attribute types. If we have a better language for
NIR, then the types can be associated with the NIR tokens, rather than
having to associate each symbol with raw type data, which doesn't make a
whole lot of sense. That also allows for AIR to better infer types and
determine what they ought to be, and further makes checking types after
template application natural, since it's not part of NIR at all. It also
means the template system can naturally apply to any sources.
Now, if we take that final step further, and make attributes streaming
instead of aggregating, we're back to a streaming pipeline where all
aggregation takes place on the ASG (which also resolves the memcpy concerns
worked around previously, also further simplifying `ele_parse` again, though
it sucks that I wasted that time). And, without the symbol types getting
in the way, since now NIR has types more fundamentally associated with
tokens, we're able to interpolate on a token stream using simple SPairs,
like I always hoped (and reverted back to in the previous commit).
Oh, and what about that desugaring pass? There's the issue of how to
represent such a thing in the type system---ideally we'd know statically
that desugaring always lowers into a more primitive NIR that reduces the
mapping that needs to be done to AIR. But that adds complexity, as
mentioned above. The alternative is to just use the templat system, as I
originally wanted to, and resolve shortcomings by augmenting the template
system to be able to handle it. That not only keeps NIR and the compiler
much simpler, but exposes more powerful tools to developers via TAME's
metalanguage, if such a thing is appropriate.
Anyway, this creates a system that's far more intuitive, and far
simpler. It does kick the can to AIR, but that's okay, since it's also
better positioned to deal with it.
Everything I wrote above is a thought dump and has not been proof-read, so
good luck! And lets hope this finally works out...it's actually feeling
good this time. The journey was necessary to discover and justify what came
out of it---everything I'm stripping away was like a cocoon, and within it
is a more beautiful and more elegant TAME.
DEV-13346
2022-11-28 13:35:10 -05:00
|
|
|
|
/// A ([`SymbolId`], [`Span`]) pair representing an
|
2022-11-05 00:08:50 -04:00
|
|
|
|
/// attribute value that may need to be interpreted within the context of
|
|
|
|
|
/// a template application.
|
tamer: nir: Detect interpolated values
This simply detects whether a value will need to be further parsed for
interpolation; it does not yet perform the parsing itself, which will happen
during desugaring.
This introduces a performance regression, for an interesting reason. I
found that introducing a single new variant to `SugaredNir` (with a
`(SymbolId, Span)` pair), was causing the width of the `NirParseState` type
to increase just enough to cause Rust to be unable to optimize away a
significant number of memcpys related to `Parser` moves, and consequently
reducing performance by nearly 50% for `tamec`. Yikes.
I suspected this would be a problem, and indeed have tried in all other
cases to avoid aggregation until the ASG---the problem is that I had wanted
to aggregate attributes for NIR so that the IR could actually make some
progress toward simplifying the stream (and therefore working with the
data), and be able to validate against a grammar defined in a single
place. The problem is that the `NirParseState` type contains a sum type for
every attribute parser, and is therefore as wide as the largest one. That
is what Rust is having trouble optimizing memcpy away for.
Indeed, reducing the number of attributes improves the situation
drastically. However, it doesn't make it go away entirely.
If you look at a callgrind profile for `tameld` (or a dissassembly), you'll
notice that I put quite a bit of effort into ensuring that the hot code path
for the lowering pipeline contains _no_ memcpys for the parsers. But that
is not the case with `tamec`---I had to move on. But I do still have the
same escape hatch that I introduced for `tameld`, which is the mutable
`Context`.
It seems that may be the solution there too, but I want to get a bit further
along first to see how these data end up propagating before I go through
that somewhat significant effort.
DEV-13156
2022-11-01 14:30:34 -04:00
|
|
|
|
///
|
|
|
|
|
/// _This object must be kept small_,
|
|
|
|
|
/// since it is used in objects that aggregate portions of the token
|
|
|
|
|
/// stream,
|
|
|
|
|
/// which must persist in memory for a short period of time,
|
|
|
|
|
/// and therefore cannot be optimized away as other portions of the IR.
|
2022-11-05 00:08:50 -04:00
|
|
|
|
#[derive(Debug, PartialEq, Eq)]
|
tamer: NIR re-simplification
Alright, this has been a rather tortured experience. The previous commit
began to state what is going on.
This is reversing a lot of prior work, with the benefit of
hindsight. Little bit of history, for the people who will probably never
read this, but who knows:
As noted at the top of NIR, I've long wanted a very simple set of general
primitives where all desugaring is done by the template system---TAME is a
metalanguage after all. Therefore, I never intended on having any explicit
desugaring operations.
But I didn't have time to augment the template system to support parsing on
attribute strings (nor am I sure if I want to do such a thing), so it became
clear that interpolation would be a pass in the compiler. Which led me to
the idea of a desugaring pass.
That in turn spiraled into representing the status of whether NIR was
desugared, and separating primitives, etc, which lead to a lot of additional
complexity. The idea was to have a Sugared and Plan NIR, and further within
them have symbols that have latent types---if they require interpolation,
then those types would be deferred until after template expansion.
The obvious problem there is that now:
1. NIR has the complexity of various types; and
2. Types were tightly coupled with NIR and how it was defined in terms of
XML destructuring.
The first attempt at this didn't go well: it was clear that the symbol types
would make mapping from Sugared to Plain NIR very complicated. Further,
since NIR had any number of symbols per Sugared NIR token, interpolation was
a pain in the ass.
So that lead to the idea of interpolating at the _attribute_ level. That
seemed to be going well at first, until I realized that the token stream of
the attribute parser does not match that of the element parser, and so that
general solution fell apart. It wouldn't have been great anyway, since then
interpolation was _also_ coupled to the destructuring of the document.
Another goal of mine has been to decouple TAME from XML. Not because I want
to move away from XML (if I did, I'd want S-expressions, not YAML, but I
don't think the team would go for that). This decoupling would allow the
use of a subset of the syntax of TAME in other places, like CSVMs and YAML
test cases, for example, if appropriate.
This approach makes sense: the grammar of TAME isn't XML, it's _embedded
within_ XML. The XML layer has to be stripped to expose it.
And so that's what NIR is now evolving into---the stripped, bare
repsentation of TAME's language. That also has other benefits too down the
line, like a REPL where you can use any number of syntaxes. I intend for
NIR to be stack-based, which I'd find to be intuitive for manipulating and
querying packages, but it could have any number of grammars, including
Prolog-like for expressing Horn clauses and querying with a
Prolog/Datalog-like syntax. But that's for the future...
The next issue is that of attribute types. If we have a better language for
NIR, then the types can be associated with the NIR tokens, rather than
having to associate each symbol with raw type data, which doesn't make a
whole lot of sense. That also allows for AIR to better infer types and
determine what they ought to be, and further makes checking types after
template application natural, since it's not part of NIR at all. It also
means the template system can naturally apply to any sources.
Now, if we take that final step further, and make attributes streaming
instead of aggregating, we're back to a streaming pipeline where all
aggregation takes place on the ASG (which also resolves the memcpy concerns
worked around previously, also further simplifying `ele_parse` again, though
it sucks that I wasted that time). And, without the symbol types getting
in the way, since now NIR has types more fundamentally associated with
tokens, we're able to interpolate on a token stream using simple SPairs,
like I always hoped (and reverted back to in the previous commit).
Oh, and what about that desugaring pass? There's the issue of how to
represent such a thing in the type system---ideally we'd know statically
that desugaring always lowers into a more primitive NIR that reduces the
mapping that needs to be done to AIR. But that adds complexity, as
mentioned above. The alternative is to just use the templat system, as I
originally wanted to, and resolve shortcomings by augmenting the template
system to be able to handle it. That not only keeps NIR and the compiler
much simpler, but exposes more powerful tools to developers via TAME's
metalanguage, if such a thing is appropriate.
Anyway, this creates a system that's far more intuitive, and far
simpler. It does kick the can to AIR, but that's okay, since it's also
better positioned to deal with it.
Everything I wrote above is a thought dump and has not been proof-read, so
good luck! And lets hope this finally works out...it's actually feeling
good this time. The journey was necessary to discover and justify what came
out of it---everything I'm stripping away was like a cocoon, and within it
is a more beautiful and more elegant TAME.
DEV-13346
2022-11-28 13:35:10 -05:00
|
|
|
|
pub struct NirSymbol<const TY: NirSymbolTy>(SymbolId, Span);
|
2022-11-05 00:08:50 -04:00
|
|
|
|
|
tamer: NIR re-simplification
Alright, this has been a rather tortured experience. The previous commit
began to state what is going on.
This is reversing a lot of prior work, with the benefit of
hindsight. Little bit of history, for the people who will probably never
read this, but who knows:
As noted at the top of NIR, I've long wanted a very simple set of general
primitives where all desugaring is done by the template system---TAME is a
metalanguage after all. Therefore, I never intended on having any explicit
desugaring operations.
But I didn't have time to augment the template system to support parsing on
attribute strings (nor am I sure if I want to do such a thing), so it became
clear that interpolation would be a pass in the compiler. Which led me to
the idea of a desugaring pass.
That in turn spiraled into representing the status of whether NIR was
desugared, and separating primitives, etc, which lead to a lot of additional
complexity. The idea was to have a Sugared and Plan NIR, and further within
them have symbols that have latent types---if they require interpolation,
then those types would be deferred until after template expansion.
The obvious problem there is that now:
1. NIR has the complexity of various types; and
2. Types were tightly coupled with NIR and how it was defined in terms of
XML destructuring.
The first attempt at this didn't go well: it was clear that the symbol types
would make mapping from Sugared to Plain NIR very complicated. Further,
since NIR had any number of symbols per Sugared NIR token, interpolation was
a pain in the ass.
So that lead to the idea of interpolating at the _attribute_ level. That
seemed to be going well at first, until I realized that the token stream of
the attribute parser does not match that of the element parser, and so that
general solution fell apart. It wouldn't have been great anyway, since then
interpolation was _also_ coupled to the destructuring of the document.
Another goal of mine has been to decouple TAME from XML. Not because I want
to move away from XML (if I did, I'd want S-expressions, not YAML, but I
don't think the team would go for that). This decoupling would allow the
use of a subset of the syntax of TAME in other places, like CSVMs and YAML
test cases, for example, if appropriate.
This approach makes sense: the grammar of TAME isn't XML, it's _embedded
within_ XML. The XML layer has to be stripped to expose it.
And so that's what NIR is now evolving into---the stripped, bare
repsentation of TAME's language. That also has other benefits too down the
line, like a REPL where you can use any number of syntaxes. I intend for
NIR to be stack-based, which I'd find to be intuitive for manipulating and
querying packages, but it could have any number of grammars, including
Prolog-like for expressing Horn clauses and querying with a
Prolog/Datalog-like syntax. But that's for the future...
The next issue is that of attribute types. If we have a better language for
NIR, then the types can be associated with the NIR tokens, rather than
having to associate each symbol with raw type data, which doesn't make a
whole lot of sense. That also allows for AIR to better infer types and
determine what they ought to be, and further makes checking types after
template application natural, since it's not part of NIR at all. It also
means the template system can naturally apply to any sources.
Now, if we take that final step further, and make attributes streaming
instead of aggregating, we're back to a streaming pipeline where all
aggregation takes place on the ASG (which also resolves the memcpy concerns
worked around previously, also further simplifying `ele_parse` again, though
it sucks that I wasted that time). And, without the symbol types getting
in the way, since now NIR has types more fundamentally associated with
tokens, we're able to interpolate on a token stream using simple SPairs,
like I always hoped (and reverted back to in the previous commit).
Oh, and what about that desugaring pass? There's the issue of how to
represent such a thing in the type system---ideally we'd know statically
that desugaring always lowers into a more primitive NIR that reduces the
mapping that needs to be done to AIR. But that adds complexity, as
mentioned above. The alternative is to just use the templat system, as I
originally wanted to, and resolve shortcomings by augmenting the template
system to be able to handle it. That not only keeps NIR and the compiler
much simpler, but exposes more powerful tools to developers via TAME's
metalanguage, if such a thing is appropriate.
Anyway, this creates a system that's far more intuitive, and far
simpler. It does kick the can to AIR, but that's okay, since it's also
better positioned to deal with it.
Everything I wrote above is a thought dump and has not been proof-read, so
good luck! And lets hope this finally works out...it's actually feeling
good this time. The journey was necessary to discover and justify what came
out of it---everything I'm stripping away was like a cocoon, and within it
is a more beautiful and more elegant TAME.
DEV-13346
2022-11-28 13:35:10 -05:00
|
|
|
|
impl<const TY: NirSymbolTy> Token for NirSymbol<TY> {
|
2022-11-05 00:08:50 -04:00
|
|
|
|
fn ir_name() -> &'static str {
|
|
|
|
|
// TODO: Include type?
|
tamer: NIR re-simplification
Alright, this has been a rather tortured experience. The previous commit
began to state what is going on.
This is reversing a lot of prior work, with the benefit of
hindsight. Little bit of history, for the people who will probably never
read this, but who knows:
As noted at the top of NIR, I've long wanted a very simple set of general
primitives where all desugaring is done by the template system---TAME is a
metalanguage after all. Therefore, I never intended on having any explicit
desugaring operations.
But I didn't have time to augment the template system to support parsing on
attribute strings (nor am I sure if I want to do such a thing), so it became
clear that interpolation would be a pass in the compiler. Which led me to
the idea of a desugaring pass.
That in turn spiraled into representing the status of whether NIR was
desugared, and separating primitives, etc, which lead to a lot of additional
complexity. The idea was to have a Sugared and Plan NIR, and further within
them have symbols that have latent types---if they require interpolation,
then those types would be deferred until after template expansion.
The obvious problem there is that now:
1. NIR has the complexity of various types; and
2. Types were tightly coupled with NIR and how it was defined in terms of
XML destructuring.
The first attempt at this didn't go well: it was clear that the symbol types
would make mapping from Sugared to Plain NIR very complicated. Further,
since NIR had any number of symbols per Sugared NIR token, interpolation was
a pain in the ass.
So that lead to the idea of interpolating at the _attribute_ level. That
seemed to be going well at first, until I realized that the token stream of
the attribute parser does not match that of the element parser, and so that
general solution fell apart. It wouldn't have been great anyway, since then
interpolation was _also_ coupled to the destructuring of the document.
Another goal of mine has been to decouple TAME from XML. Not because I want
to move away from XML (if I did, I'd want S-expressions, not YAML, but I
don't think the team would go for that). This decoupling would allow the
use of a subset of the syntax of TAME in other places, like CSVMs and YAML
test cases, for example, if appropriate.
This approach makes sense: the grammar of TAME isn't XML, it's _embedded
within_ XML. The XML layer has to be stripped to expose it.
And so that's what NIR is now evolving into---the stripped, bare
repsentation of TAME's language. That also has other benefits too down the
line, like a REPL where you can use any number of syntaxes. I intend for
NIR to be stack-based, which I'd find to be intuitive for manipulating and
querying packages, but it could have any number of grammars, including
Prolog-like for expressing Horn clauses and querying with a
Prolog/Datalog-like syntax. But that's for the future...
The next issue is that of attribute types. If we have a better language for
NIR, then the types can be associated with the NIR tokens, rather than
having to associate each symbol with raw type data, which doesn't make a
whole lot of sense. That also allows for AIR to better infer types and
determine what they ought to be, and further makes checking types after
template application natural, since it's not part of NIR at all. It also
means the template system can naturally apply to any sources.
Now, if we take that final step further, and make attributes streaming
instead of aggregating, we're back to a streaming pipeline where all
aggregation takes place on the ASG (which also resolves the memcpy concerns
worked around previously, also further simplifying `ele_parse` again, though
it sucks that I wasted that time). And, without the symbol types getting
in the way, since now NIR has types more fundamentally associated with
tokens, we're able to interpolate on a token stream using simple SPairs,
like I always hoped (and reverted back to in the previous commit).
Oh, and what about that desugaring pass? There's the issue of how to
represent such a thing in the type system---ideally we'd know statically
that desugaring always lowers into a more primitive NIR that reduces the
mapping that needs to be done to AIR. But that adds complexity, as
mentioned above. The alternative is to just use the templat system, as I
originally wanted to, and resolve shortcomings by augmenting the template
system to be able to handle it. That not only keeps NIR and the compiler
much simpler, but exposes more powerful tools to developers via TAME's
metalanguage, if such a thing is appropriate.
Anyway, this creates a system that's far more intuitive, and far
simpler. It does kick the can to AIR, but that's okay, since it's also
better positioned to deal with it.
Everything I wrote above is a thought dump and has not been proof-read, so
good luck! And lets hope this finally works out...it's actually feeling
good this time. The journey was necessary to discover and justify what came
out of it---everything I'm stripping away was like a cocoon, and within it
is a more beautiful and more elegant TAME.
DEV-13346
2022-11-28 13:35:10 -05:00
|
|
|
|
"NIR Symbol"
|
2022-11-05 00:08:50 -04:00
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
fn span(&self) -> Span {
|
|
|
|
|
match self {
|
|
|
|
|
Self(_, span) => *span,
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
tamer: NIR re-simplification
Alright, this has been a rather tortured experience. The previous commit
began to state what is going on.
This is reversing a lot of prior work, with the benefit of
hindsight. Little bit of history, for the people who will probably never
read this, but who knows:
As noted at the top of NIR, I've long wanted a very simple set of general
primitives where all desugaring is done by the template system---TAME is a
metalanguage after all. Therefore, I never intended on having any explicit
desugaring operations.
But I didn't have time to augment the template system to support parsing on
attribute strings (nor am I sure if I want to do such a thing), so it became
clear that interpolation would be a pass in the compiler. Which led me to
the idea of a desugaring pass.
That in turn spiraled into representing the status of whether NIR was
desugared, and separating primitives, etc, which lead to a lot of additional
complexity. The idea was to have a Sugared and Plan NIR, and further within
them have symbols that have latent types---if they require interpolation,
then those types would be deferred until after template expansion.
The obvious problem there is that now:
1. NIR has the complexity of various types; and
2. Types were tightly coupled with NIR and how it was defined in terms of
XML destructuring.
The first attempt at this didn't go well: it was clear that the symbol types
would make mapping from Sugared to Plain NIR very complicated. Further,
since NIR had any number of symbols per Sugared NIR token, interpolation was
a pain in the ass.
So that lead to the idea of interpolating at the _attribute_ level. That
seemed to be going well at first, until I realized that the token stream of
the attribute parser does not match that of the element parser, and so that
general solution fell apart. It wouldn't have been great anyway, since then
interpolation was _also_ coupled to the destructuring of the document.
Another goal of mine has been to decouple TAME from XML. Not because I want
to move away from XML (if I did, I'd want S-expressions, not YAML, but I
don't think the team would go for that). This decoupling would allow the
use of a subset of the syntax of TAME in other places, like CSVMs and YAML
test cases, for example, if appropriate.
This approach makes sense: the grammar of TAME isn't XML, it's _embedded
within_ XML. The XML layer has to be stripped to expose it.
And so that's what NIR is now evolving into---the stripped, bare
repsentation of TAME's language. That also has other benefits too down the
line, like a REPL where you can use any number of syntaxes. I intend for
NIR to be stack-based, which I'd find to be intuitive for manipulating and
querying packages, but it could have any number of grammars, including
Prolog-like for expressing Horn clauses and querying with a
Prolog/Datalog-like syntax. But that's for the future...
The next issue is that of attribute types. If we have a better language for
NIR, then the types can be associated with the NIR tokens, rather than
having to associate each symbol with raw type data, which doesn't make a
whole lot of sense. That also allows for AIR to better infer types and
determine what they ought to be, and further makes checking types after
template application natural, since it's not part of NIR at all. It also
means the template system can naturally apply to any sources.
Now, if we take that final step further, and make attributes streaming
instead of aggregating, we're back to a streaming pipeline where all
aggregation takes place on the ASG (which also resolves the memcpy concerns
worked around previously, also further simplifying `ele_parse` again, though
it sucks that I wasted that time). And, without the symbol types getting
in the way, since now NIR has types more fundamentally associated with
tokens, we're able to interpolate on a token stream using simple SPairs,
like I always hoped (and reverted back to in the previous commit).
Oh, and what about that desugaring pass? There's the issue of how to
represent such a thing in the type system---ideally we'd know statically
that desugaring always lowers into a more primitive NIR that reduces the
mapping that needs to be done to AIR. But that adds complexity, as
mentioned above. The alternative is to just use the templat system, as I
originally wanted to, and resolve shortcomings by augmenting the template
system to be able to handle it. That not only keeps NIR and the compiler
much simpler, but exposes more powerful tools to developers via TAME's
metalanguage, if such a thing is appropriate.
Anyway, this creates a system that's far more intuitive, and far
simpler. It does kick the can to AIR, but that's okay, since it's also
better positioned to deal with it.
Everything I wrote above is a thought dump and has not been proof-read, so
good luck! And lets hope this finally works out...it's actually feeling
good this time. The journey was necessary to discover and justify what came
out of it---everything I'm stripping away was like a cocoon, and within it
is a more beautiful and more elegant TAME.
DEV-13346
2022-11-28 13:35:10 -05:00
|
|
|
|
impl<const TY: NirSymbolTy> Display for NirSymbol<TY> {
|
2022-11-05 00:08:50 -04:00
|
|
|
|
fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
|
|
|
|
|
match self {
|
2022-11-29 11:42:19 -05:00
|
|
|
|
Self(sym, _span) => {
|
|
|
|
|
write!(f, "{TY} {fmt_sym}", fmt_sym = TtQuote::wrap(sym),)
|
|
|
|
|
}
|
2022-11-05 00:08:50 -04:00
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
tamer: NIR re-simplification
Alright, this has been a rather tortured experience. The previous commit
began to state what is going on.
This is reversing a lot of prior work, with the benefit of
hindsight. Little bit of history, for the people who will probably never
read this, but who knows:
As noted at the top of NIR, I've long wanted a very simple set of general
primitives where all desugaring is done by the template system---TAME is a
metalanguage after all. Therefore, I never intended on having any explicit
desugaring operations.
But I didn't have time to augment the template system to support parsing on
attribute strings (nor am I sure if I want to do such a thing), so it became
clear that interpolation would be a pass in the compiler. Which led me to
the idea of a desugaring pass.
That in turn spiraled into representing the status of whether NIR was
desugared, and separating primitives, etc, which lead to a lot of additional
complexity. The idea was to have a Sugared and Plan NIR, and further within
them have symbols that have latent types---if they require interpolation,
then those types would be deferred until after template expansion.
The obvious problem there is that now:
1. NIR has the complexity of various types; and
2. Types were tightly coupled with NIR and how it was defined in terms of
XML destructuring.
The first attempt at this didn't go well: it was clear that the symbol types
would make mapping from Sugared to Plain NIR very complicated. Further,
since NIR had any number of symbols per Sugared NIR token, interpolation was
a pain in the ass.
So that lead to the idea of interpolating at the _attribute_ level. That
seemed to be going well at first, until I realized that the token stream of
the attribute parser does not match that of the element parser, and so that
general solution fell apart. It wouldn't have been great anyway, since then
interpolation was _also_ coupled to the destructuring of the document.
Another goal of mine has been to decouple TAME from XML. Not because I want
to move away from XML (if I did, I'd want S-expressions, not YAML, but I
don't think the team would go for that). This decoupling would allow the
use of a subset of the syntax of TAME in other places, like CSVMs and YAML
test cases, for example, if appropriate.
This approach makes sense: the grammar of TAME isn't XML, it's _embedded
within_ XML. The XML layer has to be stripped to expose it.
And so that's what NIR is now evolving into---the stripped, bare
repsentation of TAME's language. That also has other benefits too down the
line, like a REPL where you can use any number of syntaxes. I intend for
NIR to be stack-based, which I'd find to be intuitive for manipulating and
querying packages, but it could have any number of grammars, including
Prolog-like for expressing Horn clauses and querying with a
Prolog/Datalog-like syntax. But that's for the future...
The next issue is that of attribute types. If we have a better language for
NIR, then the types can be associated with the NIR tokens, rather than
having to associate each symbol with raw type data, which doesn't make a
whole lot of sense. That also allows for AIR to better infer types and
determine what they ought to be, and further makes checking types after
template application natural, since it's not part of NIR at all. It also
means the template system can naturally apply to any sources.
Now, if we take that final step further, and make attributes streaming
instead of aggregating, we're back to a streaming pipeline where all
aggregation takes place on the ASG (which also resolves the memcpy concerns
worked around previously, also further simplifying `ele_parse` again, though
it sucks that I wasted that time). And, without the symbol types getting
in the way, since now NIR has types more fundamentally associated with
tokens, we're able to interpolate on a token stream using simple SPairs,
like I always hoped (and reverted back to in the previous commit).
Oh, and what about that desugaring pass? There's the issue of how to
represent such a thing in the type system---ideally we'd know statically
that desugaring always lowers into a more primitive NIR that reduces the
mapping that needs to be done to AIR. But that adds complexity, as
mentioned above. The alternative is to just use the templat system, as I
originally wanted to, and resolve shortcomings by augmenting the template
system to be able to handle it. That not only keeps NIR and the compiler
much simpler, but exposes more powerful tools to developers via TAME's
metalanguage, if such a thing is appropriate.
Anyway, this creates a system that's far more intuitive, and far
simpler. It does kick the can to AIR, but that's okay, since it's also
better positioned to deal with it.
Everything I wrote above is a thought dump and has not been proof-read, so
good luck! And lets hope this finally works out...it's actually feeling
good this time. The journey was necessary to discover and justify what came
out of it---everything I'm stripping away was like a cocoon, and within it
is a more beautiful and more elegant TAME.
DEV-13346
2022-11-28 13:35:10 -05:00
|
|
|
|
impl<const TY: NirSymbolTy> From<(SymbolId, Span)> for NirSymbol<TY> {
|
|
|
|
|
fn from((val, span): (SymbolId, Span)) -> Self {
|
|
|
|
|
Self(val, span)
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
impl<const TY: NirSymbolTy> From<Attr> for NirSymbol<TY> {
|
|
|
|
|
fn from(attr: Attr) -> Self {
|
|
|
|
|
match attr {
|
|
|
|
|
Attr(_, val, AttrSpan(_, vspan)) => (val, vspan).into(),
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
tamer: nir: Detect interpolated values
This simply detects whether a value will need to be further parsed for
interpolation; it does not yet perform the parsing itself, which will happen
during desugaring.
This introduces a performance regression, for an interesting reason. I
found that introducing a single new variant to `SugaredNir` (with a
`(SymbolId, Span)` pair), was causing the width of the `NirParseState` type
to increase just enough to cause Rust to be unable to optimize away a
significant number of memcpys related to `Parser` moves, and consequently
reducing performance by nearly 50% for `tamec`. Yikes.
I suspected this would be a problem, and indeed have tried in all other
cases to avoid aggregation until the ASG---the problem is that I had wanted
to aggregate attributes for NIR so that the IR could actually make some
progress toward simplifying the stream (and therefore working with the
data), and be able to validate against a grammar defined in a single
place. The problem is that the `NirParseState` type contains a sum type for
every attribute parser, and is therefore as wide as the largest one. That
is what Rust is having trouble optimizing memcpy away for.
Indeed, reducing the number of attributes improves the situation
drastically. However, it doesn't make it go away entirely.
If you look at a callgrind profile for `tameld` (or a dissassembly), you'll
notice that I put quite a bit of effort into ensuring that the hot code path
for the lowering pipeline contains _no_ memcpys for the parsers. But that
is not the case with `tamec`---I had to move on. But I do still have the
same escape hatch that I introduced for `tameld`, which is the mutable
`Context`.
It seems that may be the solution there too, but I want to get a bit further
along first to see how these data end up propagating before I go through
that somewhat significant effort.
DEV-13156
2022-11-01 14:30:34 -04:00
|
|
|
|
// Force developer to be conscious of any changes in size;
|
tamer: NIR re-simplification
Alright, this has been a rather tortured experience. The previous commit
began to state what is going on.
This is reversing a lot of prior work, with the benefit of
hindsight. Little bit of history, for the people who will probably never
read this, but who knows:
As noted at the top of NIR, I've long wanted a very simple set of general
primitives where all desugaring is done by the template system---TAME is a
metalanguage after all. Therefore, I never intended on having any explicit
desugaring operations.
But I didn't have time to augment the template system to support parsing on
attribute strings (nor am I sure if I want to do such a thing), so it became
clear that interpolation would be a pass in the compiler. Which led me to
the idea of a desugaring pass.
That in turn spiraled into representing the status of whether NIR was
desugared, and separating primitives, etc, which lead to a lot of additional
complexity. The idea was to have a Sugared and Plan NIR, and further within
them have symbols that have latent types---if they require interpolation,
then those types would be deferred until after template expansion.
The obvious problem there is that now:
1. NIR has the complexity of various types; and
2. Types were tightly coupled with NIR and how it was defined in terms of
XML destructuring.
The first attempt at this didn't go well: it was clear that the symbol types
would make mapping from Sugared to Plain NIR very complicated. Further,
since NIR had any number of symbols per Sugared NIR token, interpolation was
a pain in the ass.
So that lead to the idea of interpolating at the _attribute_ level. That
seemed to be going well at first, until I realized that the token stream of
the attribute parser does not match that of the element parser, and so that
general solution fell apart. It wouldn't have been great anyway, since then
interpolation was _also_ coupled to the destructuring of the document.
Another goal of mine has been to decouple TAME from XML. Not because I want
to move away from XML (if I did, I'd want S-expressions, not YAML, but I
don't think the team would go for that). This decoupling would allow the
use of a subset of the syntax of TAME in other places, like CSVMs and YAML
test cases, for example, if appropriate.
This approach makes sense: the grammar of TAME isn't XML, it's _embedded
within_ XML. The XML layer has to be stripped to expose it.
And so that's what NIR is now evolving into---the stripped, bare
repsentation of TAME's language. That also has other benefits too down the
line, like a REPL where you can use any number of syntaxes. I intend for
NIR to be stack-based, which I'd find to be intuitive for manipulating and
querying packages, but it could have any number of grammars, including
Prolog-like for expressing Horn clauses and querying with a
Prolog/Datalog-like syntax. But that's for the future...
The next issue is that of attribute types. If we have a better language for
NIR, then the types can be associated with the NIR tokens, rather than
having to associate each symbol with raw type data, which doesn't make a
whole lot of sense. That also allows for AIR to better infer types and
determine what they ought to be, and further makes checking types after
template application natural, since it's not part of NIR at all. It also
means the template system can naturally apply to any sources.
Now, if we take that final step further, and make attributes streaming
instead of aggregating, we're back to a streaming pipeline where all
aggregation takes place on the ASG (which also resolves the memcpy concerns
worked around previously, also further simplifying `ele_parse` again, though
it sucks that I wasted that time). And, without the symbol types getting
in the way, since now NIR has types more fundamentally associated with
tokens, we're able to interpolate on a token stream using simple SPairs,
like I always hoped (and reverted back to in the previous commit).
Oh, and what about that desugaring pass? There's the issue of how to
represent such a thing in the type system---ideally we'd know statically
that desugaring always lowers into a more primitive NIR that reduces the
mapping that needs to be done to AIR. But that adds complexity, as
mentioned above. The alternative is to just use the templat system, as I
originally wanted to, and resolve shortcomings by augmenting the template
system to be able to handle it. That not only keeps NIR and the compiler
much simpler, but exposes more powerful tools to developers via TAME's
metalanguage, if such a thing is appropriate.
Anyway, this creates a system that's far more intuitive, and far
simpler. It does kick the can to AIR, but that's okay, since it's also
better positioned to deal with it.
Everything I wrote above is a thought dump and has not been proof-read, so
good luck! And lets hope this finally works out...it's actually feeling
good this time. The journey was necessary to discover and justify what came
out of it---everything I'm stripping away was like a cocoon, and within it
is a more beautiful and more elegant TAME.
DEV-13346
2022-11-28 13:35:10 -05:00
|
|
|
|
// see `NirSymbol` docs for more information.
|
|
|
|
|
assert_eq_size!(NirSymbol<{ NirSymbolTy::AnyIdent }>, (SymbolId, Span));
|
tamer: Introduce NIR (accepting only)
This introduces NIR, but only as an accepting grammar; it doesn't yet emit
the NIR IR, beyond TODOs.
This modifies `tamec` to, while copying XIR, also attempt to lower NIR to
produce parser errors, if any. It does not yet fail compilation, as I just
want to be cautious and observe that everything's working properly for a
little while as people use it, before I potentially break builds.
This is the culmination of months of supporting effort. The NIR grammar is
derived from our existing TAME sources internally, which I use for now as a
test case until I introduce test cases directly into TAMER later on (I'd do
it now, if I hadn't spent so much time on this; I'll start introducing tests
as I begin emitting NIR tokens). This is capable of fully parsing our
largest system with >900 packages, as well as `core`.
`tamec`'s lowering is a mess; that'll be cleaned up in future commits. The
same can be said about `tameld`.
NIR's grammar has some initial documentation, but this will improve over
time as well.
The generated docs still need some improvement, too, especially with
generated identifiers; I just want to get this out here for testing.
DEV-7145
2022-08-29 15:28:03 -04:00
|
|
|
|
|
|
|
|
|
#[derive(Debug, PartialEq, Eq)]
|
|
|
|
|
pub enum PkgType {
|
|
|
|
|
/// Package is intended to produce an executable program.
|
|
|
|
|
///
|
|
|
|
|
/// This is specified by the `rater` root node.
|
|
|
|
|
Prog,
|
|
|
|
|
/// Package is intended to be imported as a component of a larger
|
|
|
|
|
/// program.
|
|
|
|
|
Mod,
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#[derive(Debug, PartialEq, Eq)]
|
|
|
|
|
pub struct Literal<const S: SymbolId>;
|
|
|
|
|
|
|
|
|
|
impl<const S: SymbolId> TryFrom<Attr> for Literal<S> {
|
|
|
|
|
type Error = NirAttrParseError;
|
|
|
|
|
|
|
|
|
|
fn try_from(attr: Attr) -> Result<Self, Self::Error> {
|
|
|
|
|
match attr {
|
|
|
|
|
Attr(_, val, _) if val == S => Ok(Literal),
|
|
|
|
|
Attr(name, _, aspan) => Err(NirAttrParseError::LiteralMismatch(
|
|
|
|
|
name,
|
|
|
|
|
aspan.value_span(),
|
|
|
|
|
S,
|
|
|
|
|
)),
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
impl From<Infallible> for NirAttrParseError {
|
|
|
|
|
fn from(x: Infallible) -> Self {
|
|
|
|
|
match x {}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
type ExpectedSymbolId = SymbolId;
|
|
|
|
|
|
|
|
|
|
#[derive(Debug, PartialEq, Eq)]
|
|
|
|
|
pub enum NirAttrParseError {
|
|
|
|
|
LiteralMismatch(QName, Span, ExpectedSymbolId),
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
impl Error for NirAttrParseError {
|
|
|
|
|
fn source(&self) -> Option<&(dyn Error + 'static)> {
|
|
|
|
|
None
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
impl Display for NirAttrParseError {
|
|
|
|
|
fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
|
|
|
|
|
match self {
|
|
|
|
|
Self::LiteralMismatch(name, _, _) => {
|
|
|
|
|
write!(f, "unexpected value for {}", TtXmlAttr::wrap(name),)
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
impl Diagnostic for NirAttrParseError {
|
|
|
|
|
fn describe(&self) -> Vec<crate::diagnose::AnnotatedSpan> {
|
|
|
|
|
match self {
|
|
|
|
|
Self::LiteralMismatch(_, span, expected) => span
|
|
|
|
|
.error(format!("expecting {}", TtQuote::wrap(expected)))
|
|
|
|
|
.into(),
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|