tame/core/vector/interpolate.xml

403 lines
14 KiB
XML
Raw Normal View History

<?xml version="1.0" encoding="utf-8"?>
<!--
Copyright (C) 2014-2022 Ryan Specialty Group, LLC.
This file is part of tame-core.
tame-core is free software: you can redistribute it and/or modify it
under the terms of the GNU General Public License as
published by the Free Software Foundation, either version 3 of the
License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
-->
2015-03-18 11:31:47 -04:00
<package xmlns="http://www.lovullo.com/rater"
xmlns:c="http://www.lovullo.com/calc"
xmlns:t="http://www.lovullo.com/rater/apply-template"
core="true"
desc="Interpolation">
2015-03-18 11:31:47 -04:00
<import package="../base" />
<import package="../numeric/common" />
2015-03-18 11:31:47 -04:00
<template name="_interpolate_" desc="Interpolate the first two values in a vector">
<param name="@values@" desc="Set" />
<param name="@low@" desc="Lower value" />
<param name="@high@" desc="Upper value" />
<param name="@actual@" desc="Actual value" />
<c:let>
<c:values>
<!-- allows us to reference the set values -->
<c:value name="orig_set" type="float" set="vector" desc="The given set">
2015-03-18 11:31:47 -04:00
<param-copy name="@values@" />
</c:value>
</c:values>
<c:let>
<c:values>
<!-- ensure that the set is ordered such that the lower value is the first index -->
<c:value name="set" type="float" set="vector" desc="Ordered set">
<c:let>
<c:values>
<c:value name="a" type="float" desc="First set value">
<c:car>
<c:value-of name="orig_set" />
</c:car>
</c:value>
<c:value name="b" type="float" desc="Second set value">
<c:value-of name="orig_set">
<c:index>
<c:const value="1" desc="Second index" />
</c:index>
</c:value-of>
</c:value>
</c:values>
<c:cases>
<!-- when a > b, reorder -->
<c:case>
<c:when name="a">
<c:gt>
<c:value-of name="b" />
</c:gt>
</c:when>
<c:vector label="Re-ordered set such that the lower value is first in the vector">
<c:value-of name="b" />
<c:value-of name="a" />
</c:vector>
</c:case>
<!-- already ordered -->
<c:otherwise>
<c:value-of name="orig_set" />
</c:otherwise>
</c:cases>
</c:let>
</c:value>
<!-- determine the skip to use for the vecstep call -->
<c:value name="skip" type="float" desc="First value to be used as skip">
<c:value-of name="@low@" />
</c:value>
<!-- determine the step to use for the vecstep call -->
<c:value name="step" type="float" desc="Use difference between the first two as the step">
<c:sum label="Step between the low and high values">
<c:value-of name="@high@" />
<t:negate>
<c:value-of name="@low@" />
</t:negate>
</c:sum>
</c:value>
</c:values>
<c:cases>
<!-- check to see if interpolation is even necessary; in particular,
this will prevent a step of 0 to vecstep, which would eventually
result in a division by 0 -->
<c:case>
<c:when name="step">
<c:eq>
<c:const value="0" desc="No step indicates identical values" />
</c:eq>
</c:when>
<!-- just return the first value; it's exact and no interpolation is necessary -->
<c:value-of name="set">
<c:index>
<c:const value="0" desc="First index" />
</c:index>
</c:value-of>
</c:case>
<!-- values are inexact; interpolation is required -->
<c:otherwise>
<!-- give the values computed above, we can re-use vecstep on the first two values on the vector -->
<c:apply name="vecstep" set="set" skip="skip" step="step" value="@actual@" />
</c:otherwise>
</c:cases>
</c:let>
</c:let>
2015-03-18 11:31:47 -04:00
</template>
<!--
Perform interpolation on the results of a table query
Not only is interpolation itself obnoxious, but determining the values
to look up from a table in order to get the data *to* interpolate also
results in a great deal of boilerplate code. This makes you not want to
kill yourself. At least not because of this interpolation query
-->
2015-03-18 11:31:47 -04:00
<template name="_interpolate-query-field_"
desc="Interpolate table data">
2015-03-18 11:31:47 -04:00
<param name="@table@" desc="Table to query" />
<param name="@field@" desc="Table field to query" />
<param name="@key@" desc="Predicate subject column" />
<param name="@step@" desc="Key step" />
<param name="@values@" desc="Query predicates" />
2015-03-18 11:31:47 -04:00
<param name="@actual@"
desc="Actual value" />
2015-03-18 11:31:47 -04:00
<param name="@index@" desc="Actual value index">
<text></text>
</param>
2015-03-18 11:31:47 -04:00
<param name="@table_max@"
desc="Maximum value in table (should be a multiple of @step)" />
<!-- TODO: accept a function to calculate factor -->
2015-03-18 11:31:47 -04:00
<param name="@step_factor@"
desc="Factor to use per step after maximum to infer value" />
2015-03-18 11:31:47 -04:00
<param name="@step_factor_index@"
desc="Index of step factor value">
2015-03-18 11:31:47 -04:00
<text></text>
</param>
<c:let>
<c:values>
<!-- if the requested limit exceeds the maximum value we support in
the table, then look up the maximum -->
<c:value name="lookup" type="float"
desc="Value to retrieve and interpolate">
<!-- maximum provided -->
2015-03-18 11:31:47 -04:00
<if name="@table_max@">
<t:cap name="@table_max@">
<c:value-of name="@actual@" />
</t:cap>
2015-03-18 11:31:47 -04:00
</if>
<!-- no maximum -->
2015-03-18 11:31:47 -04:00
<unless name="@table_max@">
<c:value-of name="@actual@" index="@index@" />
2015-03-18 11:31:47 -04:00
</unless>
</c:value>
</c:values>
<c:sum>
<!-- lookup -->
<t:let-round name="lookup"
step="@step@"
high="high"
low="low">
<!-- query and interpolate -->
<t:interpolate low="low"
high="high"
actual="lookup">
<t:query-field table="@table@"
field="@field@">
<!-- query for upper and lower values for interpolation -->
<t:where-eq field="@key@">
<c:value-of name="low" />
<c:value-of name="high" />
</t:where-eq>
2015-03-18 11:31:47 -04:00
<param-copy name="@values@" />
</t:query-field>
</t:interpolate>
</t:let-round>
<!-- step factor -->
2015-03-18 11:31:47 -04:00
<if name="@step_factor@">
<c:let>
<c:values>
<!-- additional value (of key) that needs to be infered -->
<c:value name="add" type="float"
desc="Additional value">
<c:sum>
<c:value-of name="@actual@" index="@index@" />
<t:negate>
<c:value-of name="lookup" />
</t:negate>
</c:sum>
</c:value>
</c:values>
<c:product>
<c:value-of name="@step_factor@"
index="@step_factor_index@" />
<c:quotient>
<c:value-of name="add" />
<c:value-of name="@step@" />
</c:quotient>
</c:product>
</c:let>
2015-03-18 11:31:47 -04:00
</if>
</c:sum>
</c:let>
2015-03-18 11:31:47 -04:00
</template>
<!--
Calculates a floating-point representation of an arbitrary position within a
vector of values, where the value may exist between two elements within the
vector.
For example, given the following vector with the value of 12.5:
[ 5 ]
[ 10 ]
<- value is somewhere in here
[ 15 ]
[ ... ]
[ 100 ]
(Since the vector is 0-indexed, and we know that the index of 10 and 15 are
1 and 2 respectively, a value halfway between them would have an index of
exactly 1.5; so that's the value we're looking for.)
To calculate its position, given a 0-indexed vector, we need to know (a) the
step between each value and (b) the offset of the first step (the skip). In
the above case, index 0 represents 5, so let's assume that the skip provided
to us is 5. In this case, we have:
12.5 - 5 = 7.5
Which is the value without the skip. We can now simply divide it by the
step:
7.5 / 5 = 1.5, Q.E.D.
-->
2015-03-18 11:31:47 -04:00
<function name="vecpos" desc="Calculate the position of a value within a vector of a given step">
<param name="step" type="float" desc="Step between each of the values" />
<param name="skip" type="float" desc="Amount skipped before first element of vector" />
<param name="value" type="float" desc="Arbitrary value" />
<c:quotient>
<c:sum>
<c:value-of name="value" />
<t:negate>
<c:value-of name="skip" />
</t:negate>
</c:sum>
<c:value-of name="step" />
</c:quotient>
2015-03-18 11:31:47 -04:00
</function>
<!--
Calculates any arbitrary value given a vector of values and the step between
those values
This function is best demonstrated with an example. Consider the following
vector: [ 0, 5, 10, ..., 100 ]T. From this, we can see that the step is 5
and the skip is 0. (If the vector would have started at 5, then the skip
would have been 5.) The value is any arbitrary value.
This performs an index calculation and then calls vecstepi for further
processing; see vecstepi and vecpos for further information. Once the
relative position within the vector is calculated, we no longer need the
step and skip amounts, since they were only needed to determine the value's
position.
-->
2015-03-18 11:31:47 -04:00
<function name="vecstep" desc="Calculate a value that falls between a vector of values at a given step">
<param name="set" type="float" set="vector" desc="Vector of values" />
<param name="step" type="float" desc="Step between each of the values" />
<param name="skip" type="float" desc="Amount skipped before first element of vector" />
<param name="value" type="float" desc="Arbitrary value" />
<!-- call the function that will do the actual work -->
<c:apply name="vecstepi" set="set">
<!-- this is why the function call is necessary; we do not support
variable assignments, so the only way to have the same effect is to
invoke another function with the assignment as an argument (this
value is used frequently) -->
<c:arg name="pos">
<c:apply name="vecpos" step="step" skip="skip" value="value" />
</c:arg>
</c:apply>
2015-03-18 11:31:47 -04:00
</function>
<!--
Calculates any arbitrary value given a vector of values and an arbitrary
index
(Continuing from vecstep): if we were given the same vector [ 0, 5, 10, ...,
100 ]T and the calculated index 2 (assuming that the vectors are 0-indexed),
that would yield the same upper and lower value (5 and 5). The result would
then be ( 5 + ( 5-5 * 2-2 ) ) = 5. That's not very impressive, so let's
consider a more complicated case.
Consider that the given position is 2.5. By taking the floor and ceiling of
this position, we arrive at indexes 2 and 3, which yields the values 10 and
15 respectively. Our goal is to determine what the value (v) at position 2.5
should be:
- Start with the lower value; we'll be adding atop of this.
- Consider the remaining values (upper - lower): 15 - 10 = 5.
This means that we'll be adding some value between 0 and 5 such that the
value is 50% of the way (remember, we had 2.5) between the two. So,
we're looking for the value 2.5.
- To get this value, we can multiply the difference in the upper and lower
bounds by the decimal portion of our position (because 5 * 0.50 = 2.5).
To get the decimal portion, we can simply subtract the floor of the
position from the position itself: 2.5 - 2 = 0.5.
- So, we have: 5 + ( 15-10 * 2.5-2 ) = 5 + ( 5 * 0.5 ) = 5 + 2.5 = 7.5.
-->
2015-03-18 11:31:47 -04:00
<function name="vecstepi" desc="Calculate a value that falls between a vector of values at an arbitrary index">
<param name="set" type="float" set="vector" desc="Vector of values" />
<param name="pos" type="float" desc="Position of value within the vector (may be between values)" />
<c:sum>
<!-- add the closest lower value... -->
<c:value-of name="set">
<c:index>
<c:floor label="Lower index">
<c:value-of name="pos" />
</c:floor>
</c:index>
</c:value-of>
<c:product label="Partial value to apply atop of the lower base value">
<c:sum label="Subtract the upper and lower values to get the increment per step">
<c:value-of name="set" label="Upper value">
<c:index>
<c:ceil>
<c:value-of name="pos" />
</c:ceil>
</c:index>
</c:value-of>
<t:negate>
<c:value-of name="set" label="Lower value">
<c:index>
<c:floor>
<c:value-of name="pos" />
</c:floor>
</c:index>
</c:value-of>
</t:negate>
</c:sum>
<!-- determine the % between the two values -->
<c:sum label="Dropping the whole number from the position (yielding only the decimal) gives us the % difference">
<c:value-of name="pos" />
<t:negate>
<c:floor>
<c:value-of name="pos" />
</c:floor>
</t:negate>
</c:sum>
</c:product>
</c:sum>
2015-03-18 11:31:47 -04:00
</function>
</package>